BSF BABY INC. Sleigh User manual

©2009 BSF BABY INC. 04000_022909 Made in China
Sleigh
Dresser
Assembly Instructions
Adult assembly required due to the presence of small parts, sharp points & sharp edges.
Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction
manual for future reference.
If a part is missing or you have questions, contact us.
1-800-886-9555
Email: [email protected]

2
WARNING -
• Read all instructions before assembling unit. KEEP INSTRUCTIONS FOR FUTURE USE. DO NOT
USE THIS UNIT IF THE INSTRUCTIONS CANNOT BE STRICTLY FOLLOWED.
B • efore each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use unit if any parts are missing or broken. Ask your dealer or call
BSF BABY INC. at 1-800-886-9555 or write to 80 Richards Street, Brooklyn, NY 11231 for
replacement parts and instructional literature, if needed. DO NOT substitute parts.
• Periodically check all bolts and screws to maintain the stability of your dresser.
• DO NOT overload drawers, particularly the top drawers.
• Be sure to use furniture wall straps to help prevent tipping of the unit.
• DO NOT allow children to climb on this product.
Failure to follow these warnings and assembly instructions
could result in serious injury or death.
!
Dresser Warnings

3
DC
A B
Left End (x1)
Dresser Top (x1)
Right End (x1)
EFront Top Rail (x1) FMiddle Rail (x3)
GH
Drawer Back Panel (x3)
Rear Bottom Rail (x1)
Parts
Back Panel (x1)
I
Rear Top Rail (x1)
JDrawer Front (x3)

4
KDrawer Left Side (x3) Drawer Right Side (x3)
L
Drawer Brace (x3)
MDrawer Handle with
Screws (x6)
N
ODrawer Bottom (x3)
“L” Allen
Wrench
“S” Allen
Wrench
Screwdriver
Wall Strap Kit (x1)
Parts
PDrawer Bracket (x12)

5
HARDWARE
SHOWN AT
ACTUAL SIZE
Front Rail Bolt (x1)
Top Bolt (x4)
Dresser Bolt (x12) Drawer Screw (x24)
Back Top Rail Screw (x2)
aa
bb
cc
dd
ee
ff Back Panel Screw (x12)
Hardware
Drawer Bracket Screw (x24)
gg

6
Continue to Step 2...
Attach one (1) Drawer Right Side (L) to
one (1) Drawer Front (J) using two (2)
Drawer Screws (dd). Make sure the
grooves on the inside of each panel
line up ( see Figure 1 ).
Parts Needed:
Drawer Assembly
1
Screwdriver
Grooves
Inside
View
Figure 1
Grooves
Drawer Right Side (x1)
L
HARDWARE
SHOWN AT
ACTUAL SIZE
Drawer Screw (x2)
dd
JDrawer Front (x1)
J
L
dd

7
Continue to Step 3...
Attach one (1) Drawer Left Side (K)
to drawer assembly using two (2)
Assembly Screws (dd). Make sure
that the grooves line up.
Parts Needed:
Drawer Assembly - continued
2
Screwdriver
HARDWARE
SHOWN AT
ACTUAL SIZE
Grooves
KDrawer Left Side (x1) Drawer Screw (x2)
dd
K
dd

8
Continue to Step 4...
Slide one (1) Drawer Bottom (O) into
the grooves on the inside of Drawer
Assembly as shown.
Parts Needed:
Drawer Assembly - continued
3
ODrawer Bottom (x1)
O

9
Continue to Step 5...
Parts Needed:
Drawer Assembly - continued
4
Insert one (1) Bottom Brace (N) into
Drawer Assembly as shown.
Drawer Brace (x3)
N
N

10
Continue to Step 6...
Parts Needed:
Drawer Assembly - continued
5
Attach one (1) Drawer Back (I) to
Drawer Assembly using four (4)
Drawer Screws (dd).
Drawer Back Panel (x1)
I
Screwdriver
Drawer Screw (x4)
dd
HARDWARE
SHOWN AT
ACTUAL SIZE
I
dd