BSS Audio Soundweb London MC-1 User manual

Soundweb™London
MC-1
Media Converter bssaudio.com
OVERVIEW:
The MC-1 is a Gigabit Media Converter which provides transport up to 10 km (6.2 miles) using 1310nm single mode fiber
cable. In use, an MC-1 will be utilized on each end of a two conductor single mode fiber optic cable deployed between
two equipment rack locations.
The MC-1 is supplied with a wall mount bracket and external power supply.
The MC-1 utilizes automatic link restoration which re-establishes network links between two MC-1 devices should a
connected Soundweb London device be disconnected and reconnected to the network. This eliminates the need to reset
the MC-1 after patching or power loss of an attached Soundweb London device.
Status LEDs on the MC-1 provide indication of Power (PWR), Fiber Link RX (RXF), Fiber Link TX (LKF), Copper RX (RXC),
and Copper TX (LKC).
Digital Audio Buss Example Diagram:
KEY FEATURES:
9Gigabit Media Conversion
9Automatic Link Restoration
9External 12V DC Power Supply
9Status LEDs
910 km (6.2 miles) Transmission Distance Using
1310nm Single Mode Fiber Cable
9SC Style Fiber Connector
9RJ45 Copper Connector
BSS AUDIO | 8760 S. Sandy Parkway | Sandy, UT 84070 U.S.A | Ph. +1 - 801-566-8800 | Fax +1 - 801-566-7662
Page 1 of 2

MC-1 Media Converter
bssaudio.com Media Converter
BSS AUDIO | 8760 S. Sandy Parkway | Sandy, UT 84070 U.S.A | - Ph. [phone] | Fax +1 - 801-566-7662
TECHNICAL SPECIFICATIONS:
Page 2 of 2
18-0598
Standards: IEEE Std. 802.3ab™ and IEEE Std. 802.3™
Connectors:
Fiber Optic Connector Type: SC fiber optic connector
UTP Connector Type: Gigabit RJ45
Fiber Optic Connector Specs:
Single Mode: Min TX PWR: -9.5 dBm
Max TX PWR: -3.0 dBm
RX Sensitivity: -20.0 dBm
Max In PWR: -3.0 dBm
Link Budget: 10.50 dB
6-Position Switch: SW1: Remote Fiber Fault Detect (Down=Enabled)
SW2: Symmetric Pause
SW3: Asymmetric Pause
SW4: Transparent Link Pass Through (UP=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback (Down=Enabled)
Status LEDs: PWR (Power): Steady green LED indicates connection to external AC power
RXF (Fiber receive): Flashing LED indicates reception of data on fiber link
LKF (Fiber link): Steady LED indicates fiber link connection
RXC (Copper receive): Flashing LED indicates reception of data on copper link
Compliance:
Safety Compliance: Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
Regulatory Compliance: FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty: Lifetime
Power and Dimensions:
Power External: AC/DC required; 12V DC, 1.5A; unregulated; standard
Environment: 0 – 50°C operating; 5% – 95% humidity non-condensing; 0 – 10,000 feet altitude
Dimensions (H x W x D): 1.0" x 3.25" x 4.8" (25mm x 82mm x 122mm)
Shipping Weight: 2 lbs. / 0.90 kg
CobraNet™ Example Diagram: