BSS Audio Soundweb London BLU-10` User manual

1
Wall Panel
Installation Guide
BSS Audio
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
http://www.bssaudio.com
801-566-8800
London

2
DECLARATION OF CONFORMITY
Manufacturer’s Name: BSS Audio
Manufacturer’s Address: 8760 S. Sandy Parkway
Sandy, Utah 84070, USA
declares that the product:
Product name: BLU 10
   Note:Productnamemaybesufxedbytheletters-EU.
Product option: None
conformstothefollowingProductSpecications:
Safety: Low Voltage Device
 EMC:  EN55103-1(1996)
   EN55103-2(1996)
Supplementary Information:
TheproductherewithcomplieswiththerequirementsoftheLowVoltageDirective73/23/EECandthe
EMCDirective89/336/EECasamendedbyDirective93/68/EEC.
  Vice-PresidentofEngineering–Pro 
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: October 24, 2005
EuropeanContact: YourlocalBSSAudioSalesandServiceOfceor
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah 84070, USA
  Ph:(801)566-8800
  Fax:(801)566-7005
Introduction
We have written this guide with the aim of helping installers and sound engineers
alike to get the most out of the BLU-10. We recommend that you read this manual,
before attempting to operate the unit. We welcome any comments or questions
regarding the BLU-10 or other BSS products, and you may contact us at the address or
world wide web sites given overleaf.
Regulatory Information
Anexampleofthisequipmenthasbeentestedandfoundtocomplywiththefollowing
EuropeanandInternationalStandardsforElectromagneticCompatability(onlywhen
usedwithametalwall-box):
FCCpart15ClassA
EN55103-1:1996(E2)
EN55103-2:1996(E2)

3
Mechanical Installation
TheBLU-10isdesignedtotintoastandard3-gangUSwallbox.Screwsare
providedtoxtheunitinplace.
Dimensionsoftheunitareshownbelow.Theuseofametalwallboxis
recommendedtoensurethattheinstallationmeetsnecessaryEMCstandards.
170mm
6.69ins
57mm
2.24ins
123mm 4.84ins
26mm 1.02ins
31mm 1.22ins
45mm
1.77ins
Power
TheBLU-10requires12-48VDCtobesuppliedexternally.Therearetwowaystodo
this:
Connectasuitablesupplytothe12-48VDCconnector,seediagrambelow,
or
theunitmaybepowerviatheEthernetconnectorusingIEEE802.3afPowerOver
Ethernet(POE).
Typical mid-span ethernet powering devices are:
3Com®PoweroverEthernetSingle-PortMidspanSolution-p/n3CNJPSE
3Com®PoweroverEthernetMultiportMidspanSolution-p/n3CNJPSE24
Ethernet switches with power over ethernet ports include:
3Com®SuperStack®3Switch4400PWR-p/n3C17205
HPProCurveSwitch2626-PWR-p/nJ8164A#ABA

4
Wiring
TheBLU-10connectsintoaSoundwebLondonnetworkviaitsEthernetport,
eitherdirectlyintotherearofarackmountdevice(e.g.,BLU-16)withaCat5
crossovercable,orwithastandardCat5cableintoanEthernetswitch.
12-48VDC
Power
Connector
USB
Connector
Ethernet
Connector
Technical Specications
Maximumnetworkcablelength: 300feet(100meters)
Powerconsumption:  300mAmaxat12V
18-1234-B