BSTY HB6005-5 User manual

Caution:
Please read the instructions carefully and
completely before using the appliance.
1. Before plugging into a socket, check
whether your voltage corresponds to the
rating label of the appliance.
2. Always disconnect the blender from the
supply if it is left unattended and before assembling, disassembling,
cleaning..
3. Don’t plug the appliance into the power supply until it is fully
assembled and always unplug before disassembling the appliance
or handle the blade.
4. Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or is dropped or damaged in any
manner. Return appliance to the nearest authorized
service facility for examination, repair or electrical or
mechanical adjustment.
5. Don’t let excess cord hang over the edge of the table or worktop or
touch hot surface.
6. The blades are very sharp! Handle carefully!
7. Keep hands and utensils out of container while blending to reduce
the risk of severe injury to persons or damage to the blender. A
scraper may be used but must be used only when the blender is
not running (does not apply to an acceptable scraper integral with
the appliance.)
8. To protect against risk of electrical shock do not put motor unit, cord,
or plug in water or other liquid.
9. This appliance should not be used by children and care should be
taken when used near children,
10.Avoid contacting moving parts.
11.Do not let cord contact hot surface, including the stove.
12.Do not blend hot liquids.
13.Neither the measuring beaker, nor the chopping bowl is microwave
proof.
14.Short - time operating（three times only）. Use the appliance to
operate soft food for no longer than 1 minute, and operate hard
food for no longer than 15 seconds.operated 3 cycles for one use.
15.TO reduce the risk of injury, never place cutting blade on base
without first putting bowl properly in place.
16.Be certain cover is securely locked in place before operating
appliance.
17.clean the hand blender with dry cloth.
18.The instruction must include details on how to clean surfaces in
contact with food and the operating times and speed settings for
accessories.
19.It shall warn of potential injury from misuse. care shall be taken
when handling the sharp cutting blades, emptying the bowl and
during cleaning.
20.Switch off the appliance and disconnected from supply before
changing accessories or approaching parts which move in use.
21.This appliance is not intended for use by children or other persons
without assistance or supervision if their physical, sensory or
mental capabilities prevent them from using it safely.
22.Children should be supervised to ensure that they do not play with
the appliance.
Description:
A. Inching switch
B. Switch I
C. Switch II
D. Motor unit
E. button
F. blender stick
G. Chopping bowl lid
H. S blade
I. Chopping bowl
J. Whisk holder
K. Whisk
L. Beaker
M.Masher

How to use your hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise and baby food as well as for mixing and milkshakes.
1. Insert the blender stick onto the motor unit until it locks.
2. Introduce the hand blender in the vessel. Then press the switchⅠ
or switchⅡ.
3. Unplug then press the ejection button to remove the blender stick
after use.
You can use the hand blender in the measuring beaker and just as
well in any other vessel.
4. Caution:the blade is very sharp!
How to use your chopper
1. Chopper is perfectly suited for hard food, such as chopping meat,
cheese, onion, herbs, garlic, carrots, walnuts, almonds, prunes etc.
2. Don’t chop extremely hard food, such as ice cubes, nutmeg, coffee
beans and grains.
Before chopping…
1. Carefully remove the plastic cover from the blade. Caution: the
blade is very sharp! Always hold it by the upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down
the blade and lock bowl. Always place the chopper bowl on the
anti-slip base.
3. Place the food in the chopper bowl.
4. Place the chopping bowl lid on the chopper bowl.
5. Place the motor unit on the chopper bowl lid until it locks.
6. Press switch to operate the chopper. During processing, hold the
motor unit with on hand and the chopper bowl the other.
7. After use, unplug then press the ejection button to remove the
motor unit.
8. Then remove the chopping bowl lid.
9. Carefully take out the blade.
10. Remove the processed food from the chopper bowl.

How to use your whisk
Use the whisk only for whipping cream, beating egg whites and
mixing sponges and Ready-mix desserts.
1. Insert the whisk into the whisk holder, then slot the gear box
onto the motor unit until it locks.
2. Place the whisk in a vessel and only. Then press the switchⅠ
or switchⅡto operate it.
3. Unplug then press the ejection button to remove the gear box
after use. Then pull the whisk out of the gear box.
How to use your masher
Use the masher only for cooked potato or egg.
1. slot the gear box onto the motor unit until it locks.
2. Place the masher on the food in a vessel and only. Then press the
switchⅠor switchⅡto operate it.
3. Unplug then press the ejection button to remove the masher after
use.
Cleaning
Cleaning the motor unit and chopping bowl lid only with a damp cloth
only. Do not immerse the motor unit in water!
1. All other parts can be cleaned in the dish washer. However, after
processing very salty food, you should rinse the blades right away.
2. Also, be careful not to use an overdose of cleaner or decalcifier in
your dishwasher.
3. When processing food with color, the plastic parts of the appliance
may become discolored. Wipe these parts with vegetable oil before
placing them in the dishwasher.
4. The blades are very sharp, please attention.
5. Unplug the appliance before cleaning.

Processing Guide (for 500ml chopping bowl)
Food
Maximum
Operation time
meat
250g
15sec
herbs
50g
10sec
nut, almonds
150g
15sec
cheese
100g
10sec
bread
80g
10sec
onions
200g
10sec
biscuits
150g
10sec
soft fruit
200g
10sec
Yeast
dough
flour
250g
10sec
water
165g
cream
2.5g
power
2.0g

HAND BLENDER
HB6005-5
AC 120V, 50/60Hz, 500W Max