BT classic 1100 Executive User manual

User Guide
On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
Digital Cordless Telephone
BT On-Air 1100 Executive
*YOU MUST SUBSCRIBE TO
BT’S CALLER DISPLAY SERVICE
BEFORE YOUR BT ON-AIR 1100
EXECUTIVE WILL DISPLAY
THIS INFORMATION
This equipment is not designed for m king emergency telephone c lls when the power f ils.
Altern tive rr ngements should be m de for ccess to emergency services.
This product is intended for connection to n logue public switched telephone networks
nd priv te switchbo rds in the United Kingdom nd Eire.
On-Air 1100 Executive 4/7/00 1:47 pm Page 1

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
2
At a glance
Greenp one
To answer a call and use
the handsfree.
Switch the power on.
Redp one
To end a call and
turn the power off.
Keypad
Up/Down
Lets you move through
the menu options and list.
Option buttons
Select options presented
in the display above the
buttons.
OK button
To confirm settings.
Clear
Display
2
A
B
C
3
D
E
F
5
J
K
L
8
T
U
V
0
6
M
N
O
9
W
X
Y
Z
1
4
G
H
I
7
P
Q
R
S
C K
On-Air 1100 Executive 4/7/00 1:47 pm Page 2

On-Air 1100 Executive user guide ~ Edition 3 ~ 12.6.00
3
BT On-Air 1100
BASE
Page button
Silent mode
Displayed when the handset
ringer has been switched off.
Incoming calls will not cause
the handset to ring.
HANDSET DISPLAY
Base 1
Handset 1
EXT INT2
In Use
Flashes to show that the
handset is in use. Secrecy
Press to mute the call so your
caller cannot hear you.
In range
Indicates that you are in range of
the base station.
Memory number
Indicates the memory location
number under which a number
is stored.
Handsfree
Indicates that you are in handsfree
mode.
Internal (Intercom)Call
Displayed during a call with
another handset (an internal call).
External Call
Displayed during an
external call.
Battery
Shows the status of the handset
battery. When the battery is fully
charged, the icon is completely
shaded. As the battery is used,
the shaded area is reduced.
On-Air 1100 Executive 4/7/00 1:47 pm Page 3

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
4
In this guide
At a glance X
Key features X
Introduction X
Unpacking your BT On-Air 1100 Executive X
For your records X
Safety infor ation X
Setting up X
Using the telephone X
Making and ending calls X
Call ti er X
Using handsfree X
Secrecy X
Na e and nu ber directory X
Paging handsets X
Internal calls X
Transferring calls X
Caller Display X
Alar clock X
Handset settings X
Base settings X
Using additional handsets and bases X
Building a phone syste X
Registering additional handsets X
Maintenance X
General X
Guarantee X
If you have to return your
BT On-Air 1100 Executive X
Technical infor ation X
Help X
Index X
On-Air 1100 Executive 4/7/00 1:47 pm Page 4

5
On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
31 RINGING3 RINGING AND BEEPS
2 CALLS
1 DIRECT RY 11 FIND
12 NEW
13 EDIT
14 DELETE
15 MY HANDSET
16 ENTRIES USED
17 P SITI NS
21 CALLS LIST
22 REDIAL LIST
23 ALL CALLS
24 LAST CALL DURATI N
5 SET 51 PR GRAM KEYS
4 ANSWER MACHINE UNAVAILABLE
311 EXTERNAL
312 INTERNAL
313 ALARM
FF or N ✔
FF or N ✔
FF or N ✔
FF or N ✔
32 SILENT M DE FF or N ✔
33 ALARM
34 TIMER 351 SET
352 STATUS
DIRECT RY
REDIAL
SILENT M DE
ANS MACHINE
INTERC M
341 SET
342 STATUS
35 BEEPS 361 KEYPAD PRESS
362 BATTERY L W
511 KEY •
52 WELC ME SCREEN
53 EC N MY M DE FF or N ✔
54 C NTRAST
55 KEYGUARD FF or N ✔
56 DATE/TIME
SILENT M DE
ANS MACHINE
INTERC M
DIRECT RY
REDIAL
512 KEY • •
ANS MACHINE
INTERC M
DIRECT RY
REDIAL
SILENT M DE
513 KEY • • •
MENU STRUCTURE
2
A
B
C
3
D
E
F
5
J
K
L
8
T
U
V
0
6
M
N
O
9
W
X
Y
Z
1
4
G
H
I
7
P
Q
R
S
C K
On-Air 1100 Executive 4/7/00 1:47 pm Page 5

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
6
6 BASE 61 REGISTER
62 CUST M BASE
63 BASE SETTINGS
611 AUT MATIC
612 CUST M
621 BASE NAME
622 PRI RITY
631 DATE/TIME VIEW
632 PH NE LINE LINE TYPE
633 HANDSETS CHANG. C DE
REGISTER
DEREGISTER
PUBLIC
PRIVATE
DIAL TYPE FREQUENCY
R DURATI N SH RT
PREFIX PREFIX VAL
MIN. LENGTH
STATUS
RESTRICT
TIME CREDIT VIEW
PULSE
L NG
M DIFY
SET TIME
SET DATE
MENU STRUCTURE
On-Air 1100 Executive 4/7/00 1:47 pm Page 6

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
7
Key features
Handsfree
Time saving and convenient,
allows you to have a conversation
without lifting the handset.
50 Name and number directory
Large directory for storing your
most important names and numbers.
Easy to use
Straight forward menu driven
system.
Up to 30 last number redial
Allows you to quickly redial the
last 30 phone numbers dialled.
This can also incorporate incoming
calls if you subscribe to BT’s
Caller Display.
Internal calls and call transfer
Transfer external calls to other
handsets. Allow a two way
conversation between registered
handsets.
Removable andset fascias
Allows you to customise your
handset with achoice of three
colour fascias.
On-Air 1100 Executive 4/7/00 1:47 pm Page 7

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
8
Introduction
For your records
For warranty purposes proof of purchase is
required so please keep your receipt.
Enter your System Code here.
The pre-set System Code number is 0000. See
page XX for information on your System Code.
Date of purchase:
Place of purchase:
Serial number
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0845 601 2476.
Unpacking your BT On-Air
1100 Executive
If anything is missing, please contact your
place of purchase immediately.
One BT On-Air 1100 base.
One BT On-Air 1000
Executive handset.
One power supply
for base station.
One telephone line cord.
One NiMH
rechargeable battery pack and
battery compartment cover.
One handset belt clip.
Three removable
handset fascias.
Self adhesive label.
BT On-Air 1100
2
A
B
C
3
D
E
F
5
J
K
L
8
T
U
V
0
6
M
N
O
9
W
X
Y
Z
1
4
G
H
I
7
P
Q
R
S
C
K
SAGEM SERVICE CENTRE
SALISBURY ROAD BUSINESS PARK
PEWSEY - WILTSHIRE
SN9 5PZ
RESPONSE SERVICE
Licence n˚. 1
GP Ni-MH Battery
Part No.: GP 4M3EMJZ
Voltage : 3.6V
Capacity : 400mAh
Date Code : D0
Plant Code : T
On-Air 1100 Executive 4/7/00 1:47 pm Page 8

General
Only use the power supply included with
the product. Using an unauthorised power
supply will invalidate your warranty and
may damage the telephone. The item
number for the mains power supply is
872101.
If Keyguard is active, it is still possible to
make emergency calls to 999 and 112.
Do not open the handset or base station.
This could expose you to high voltages or
other risks. Contact the helpline for all
repairs.
Radio signals transmitted between the
handset and base may cause interference
to hearing aids.
This product should not be used near
emergency/intensive care medical
equipment and should not be used by
people with pacemakers.
Never dispose of batteries in a fire. There
is a serious risk of explosion and/or the
release of highly toxic chemicals. Check
your local regulations for special disposal
regulations.
Cleaning
Simply clean the handset and base
station with a damp (not wet) cloth, or an
antistatic wipe. Never use household
polish as this will damage the product.
Never use a dry cloth as this may cause a
static shock.
Environmental
Do not expose to direct sunlight.
The product may heat up when the batteries
are being recharged. This is normal.
However, we recommend that you do not
place the product on antique/veneered
wood to avoid damage.
Do not stand your product on carpets or
other surfaces which generate fibres, or
place it in locations preventing free flow of
air over it’s surfaces.
Do not submerge any part of your product
in water and do not use it in damp or humid
conditions, such as in bathrooms.
Do not expose your product to fire,
explosive or other hazardous conditions.
There is a slight chance that your phone
could be damaged by an electrical storm.
We recommend that you unplug the power
and telephone line cord for the duration of
the storm.
On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
9
Safety information
On-Air 1100 Executive 4/7/00 1:47 pm Page 9

10
Please note that your handset is already
registered to the base station.
Situate your product close enough to the
telephone and mains power sockets so that
the cables will reach.
Make sure it is at least 1 metre away from
other electrical products to avoid interference.
Do not situate the product in the bathroom or
other humid areas.
Once connected, put the plinth back on the
base to prevent it from rocking on the table.
There are two positions for the plinth when
joining it to the base both can be used for
desk mounting and one of them for wall
mounting (see wall mounting on page 27).
Plug the power adaptor into the wall socket
and switch on. When the power is switched on,
the button on your base will light up.
Setting up
Plan the location.
1Connect t e power supply and
switc on.
Thread the power supply cable and line cord
through the square hole in the plinth before
fixing to the base.
Plug the power supply cable into the socket
on the underside of your base. The power
cable connector and socket are coloured red.
WARNING
Please take care that the power supply and
telephone line cord are connected to the
correct sockets as incorrect placement could
damage your equipment.
WARNING
Do not connect the telephone line cord to
the phone socket until your handset is fully
charged. This will prevent the risk of the
phone being answered before the battery is
charged. Answering the phone before the
battery is fully charged may prevent it from
reaching its optimum capacity.
On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
On-Air 1100 Executive 4/7/00 1:48 pm Page 10

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
11
2. Install t e battery in t e
andset and c arge t em for at
least 16 ours
3. Connect t e telep one line cord
(after c arging your andset)
Plug the line cord into the telephone wall
socket.
Slide off the battery cover and install the
battery. Replace the battery cover.
When the battery has been charged for at
least 16 hours the display will show the
symbol; you can then connect the telephone
line cord to the base.
WARNING
Under no circumstances should non-
rechargeable batteries be used. Only use the
approved batteries. Using unapproved
batteries will invalidate your warranty and
may damage the telephone.
Fully discharging the batteries at least once
a week will help them to last as long as
possible. However, the charge capacity of
rechargeable batteries will reduce with time
as they wear out, so reducing the
talk/standby time of the handset. Eventually
they will need to be replaced. New batteries
can be obtained from any BT Shop or from
the helpline on 0845 601 2476.
Battery performance
Your handset is supplied with NiMH
batteries. These need to be initially charged
continuously for 16 hours to reach full charge.
Note that the battery charge icon does not
indicate the correct level when the batteries
are first installed. The batteries must first be
fully charged.
Battery low warning
If the handset battery symbol is empty and
you hear warning beeps, you will need to
recharge your handset before you can use it.
Helpline
If you are experiencing difficulty, please call
the BT On-Air Helpline on 0845 601 2476.
Empty 1
/32/3Full
On-Air 1100 Executive 4/7/00 1:48 pm Page 11

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
12
Using the telephone
To make an external call
Press and hold the GREEN PH NE
button to switch the handset on.
Press and hold the RED PH NE
button to switch the handset off.
Press the GREEN PH NE button.
The display shows the symbol.
Dial the number.
Preparatory dialling
First enter the number to be dialled.
The number is shown in the display.
If you have entered the number
correctly, press the GREEN PH NE
button to dial the number.
Your handset will automatically time the
duration of all external calls.
The handset display shows the call duration
both during your call and for a few seconds
after is it complete.
To end a call
Press the RED PH NE button.
To receive an external call
Press the GREEN PH NE button to
answer the call.
Making and ending calls
Call timer
123
To switc t e andset power on
and off
On-Air 1100 Executive 4/7/00 1:48 pm Page 12

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
13
You can adjust the volume during a
call and whilst using the phone on
handsfree.
Press the button to increase
the volume.
Press the button to decrease
the volume.
The display shows the current
volume level.
To adjust t e earpiece volume
Note
The symbol on your handset display
indicates when you are in range of the base
station. If the symbol disappears you are out
of range and will need to move closer to the
base station.
To use andsfree
During a call you can switch to
handsfree mode.
Whilst on a call press the GREEN
PH NE button.
When handsfree is active you see the
symbol flashing
To switch handsfree off, press the
GREEN PH NE button again.
Handsfree allows you to talk to your caller
without holding the handset.
Handsfree
Redial list
The redial list can also incorporate
incoming calls if you subscribe to
BT’s Caller Display.
Press and hold down the GREEN
PH NE button.
Use the UP and D WN buttons until
the number you want is displayed.
Press the GREEN PH NE button to
dial the number you want.
To delete numbers s own in t e
redial list
Enter the redial list
Use the UP and D WN buttons until
the number you want to store in the
memory is displayed.
Press K to confirm.
Use the UP or D WN buttons until
DIR STORE is displayed.
Press K to confirm.
Enter the name you want to store
with the number by using the keypad.
Press K to confirm.
To copy numbers s own in t e
redial list to t e directory
Redial
▲
▼
▲
▼
C K
C K
Enter the redial list
Use the UP or D WN buttons until
the number you want to delete is
displayed.
Press K to confirm.
Use the UP and D WN buttons until
DELETE or DELETE ALL is displayed.
Press K to confirm.
▲
▼
▲
▼
C K
C K
▲
▼
123
On-Air 1100 Executive 4/7/00 1:48 pm Page 13

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
14
During a call, press the Cbutton.
will now flash to show it is in
operation.
Press the Cbutton again to resume
your call.
To switc secrecy on/off
When on a call you can talk to someone in the
same room, without your caller hearing.
Secrecy
You can store up to 50 of your most frequently
used names and numbers.
Name and number directory
C K
C K
Press the D WN button until
DIRECTORY is displayed.
Press K to confirm.
Use D WN button to scroll to
NEW .
Press K to confirm.
Enter the name using the letters on
the keypad.
Entering names
Use the keypad letters to enter names
by using a long press of the button,
i.e. if you press and hold the 8button
the following characters appear,
T , U , V , t , u , v . For example, if you
wish to store the name TOM:
To enter the letter T, press 8and hold,
the cursor will automatically move to
the right and display the next chosen
letter.
To enter O, press 6and hold.
To store a name and number
in t e directory
ABC
▼
▼
8
T
U
V
6
M
N
O
C K
C K
To enter the M, press 6and hold.
If you enter a digit incorrectly you
can delete it by pressing the Cbutton.
Press K to confirm.
Enter the telephone number you
want to store.
Press K to confirm.
6
M
N
O
C K
C K
C K
123
To dial a number from t e directory
Press the D WN button to select the
DIRECTORY .
Press K to confirm.
Use the UP or D WN buttons to
scroll to
FIND .
Press K to confirm.
Use the UP and D WN buttons to
find the entry you want to dial.
Press the GREEN PH NE button to
dial the number.
▼
▲
▼
▲
▼
C K
C K
On-Air 1100 Executive 4/7/00 1:48 pm Page 14

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
15
Press the D WN button to select
DIRECTORY .
Press K to confirm.
Use the UP or D WN buttons to
scroll to
EDIT .
Press K to confirm.
Use the UP and D WN buttons to
find the entry you want to amend.
Press K to confirm.
Use the Cbutton to delete numbers
or letters.
Edit the entry using the
numbers/letters on the keypad.
Press the K button to store the
new entry.
The display will then show
DONE .
To edit and delete directory
numbers
You can alert handset users that they are
wanted, or locate a missing handset. (Paging
calls cannot be answered by a handset.)
To page a andset from t e base
Press the button on the base. All
handsets registered with the base
will ring.
To end paging, press the button
again.
Or
Press the GREEN PH NE button on
any handset, followed by the RED
PH NE button
Paging andsets
▼
▲
▼
▲
▼
C K
C K
C K
C K
C K
123
If you have multiple handsets registered to a
base you can make internal calls between
handsets.
Internal calls
Press the number of the handset you
wish to dial i.e 1, 2, 3, 4, 5, 6.
Or
To call all handsets press the ✱button
Press the GREEN PH NE button.
Press the RED PH NE button to end
the call.
To make an internal call to anot er
andset
123
You can transfer an external call to another
handset registered to the base.
Transferring calls
While on an external call:
Press the K button and
CALL ON
HOLD
will be displayed.
Enter the number of the handset to
which you want to transfer the call.
Press the GREEN PH NE button,
then press the RED PH NE button.
The call will be transfered. You can
still talk on transfer if you want to.
If there is no reply to the transferring
handset it will eventually call you back.
To transfer an external call
between andsets
C K
123
On-Air 1100 Executive 4/7/00 1:48 pm Page 15

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
16
Keyguard
To switc keyguard on
Press the UP or D WN buttons to
display SET .
Press K to confirm.
Press the UP and D WN buttons to
display
KEY UARD .
Press K to confirm.
The display shows
Press the button until the ✔
appears in the box next to
ON .
Press K to confirm.
ON

▲
▼
C K
▲
▼
C K
C K
To use your andset w en t e
keyguard is on
This temporarily switches off the
keyguard allowing you to make a
call. The keyguard will then re-
activate after one minute.
Press the STAR button
Press K to confirm.
If you receive an incoming call whilst
the keyguard is on just press the
GREEN PH NE button.
C K
To switc keyguard off
Press the STAR button
Press K to confirm.
Press the UP or D WN buttons to
display
SET .
Press K to confirm.
Press the UP and D WN buttons to
display
KEY UARD .
Press K to confirm.
The display shows
Press the button until the ✔is
removed from the
ON box.
Press K to confirm.
▲
▼
C K
▲
▼
C K
C K
✔ON

C K
Note
If the keyguard is active, the emergency
numbers 999, 112 can still be dialled.
On-Air 1100 Executive 4/7/00 1:48 pm Page 16

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
17
To set t e alarm
Press the D WN button to enter the
RIN IN AND BEEPS menu.
Press K to confirm.
Use the D WN button to scroll to
ALARM .
Press K to confirm.
SET will be highlighted.
Press K to confirm.
Enter the time you want the alarm to
go off at. (24 hour clock)
Press K to confirm.
Use the UP or D WN buttons to
scroll to
STATUS .
Press K to confirm.
The display shows
Press the button until the ✔
appears in the box next to
ON .
Press K to confirm.
When the alarm is set is displayed.
You can use your handset as an alarm clock.
You must set the time before the alarm will
work. The alarm will ring daily until the setting
is turned off.
Alarm clock
▼
▼
123
C K
C K
C K
C K
C K
C K
▲
▼
ON

To turn t e alarm off
Press the D WN button to enter the
RIN IN AND BEEPS menu.
Press K to confirm.
Use the D WN button to scroll to
ALARM .
Press K to confirm.
Use the D WN button to select
STATUS .
Press K to confirm.
The display shows
Press the button until the ✔is
removed from the
ON box.
Press K to confirm.
▼
▼
▼
C K
C K
C K
✔ON

On-Air 1100 Executive 4/7/00 1:48 pm Page 17

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
18
Timer
You can use your handset to set a
reminder alarm which will activate
after a period of time of your choice.
The alarm will repeat daily until the
setting is turned off.
Press the D WN button to select
RIN IN AND BEEPS .
Press K.
Press the UP button to select
TIMER .
Press K.
Press K again to select
SET .
Using 4 digits, enter the time in 24
hour clock format to elapse before
your reminder call activates.
Press K to save.
Press the D WN button to select
STATUS .
Press K.
Press the button until a ✔
appears in the box next to
ON .
Press K to confirm.
To switch off the timer press the
button until the ✔ disappears
from the box next to
ON .
Press K to confirm.
▼
▼
C K
C K
C K
C K
C K
C K
C K
▲If you subscribe to BT’s Caller Display service
you can see who is calling you on your handset
display, as well as the date and time of their call
(unless the number has been withheld).
If you have stored a name to go with the
number in your handset directory, the name
will be displayed instead.
Caller Display
Important
To use Caller Display you must first subscribe
to BT’s Caller Display Service.
Your BT On-Air product will ony work on
BT’s Caller Display Service.
For more information on BT Select Services
call BT free on 0800 800 150.
Important
The Caller Display service will not operate
when your base station is connected to a
switchboard.
Whether you take a call or not, the caller’s
details are stored in the Calls List. The Calls
List holds the telephone numbers of the last
20 people who called you.
You can display, scroll through and dial
numbers on the list and copy them into the
directory.
When you receive a call the caller’s number
will appear on the display. If the number is
also stored in your handset directory then the
corresponding name will be shown instead of
the number.
If the caller has withheld their number then
------------- will appear on the display.
If for some reason the calling number is not
available then  will appear on the
display.
On-Air 1100 Executive 4/7/00 1:48 pm Page 18

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
19
The calls list contains the telephone numbers
of your last 20 callers. If you receive more
than one call from the same telephone
number then it will only appear once in the
list.
If a call is received when the calls list is full
then the oldest entry will be deleted
automatically.
If no number is received for a call then no
entry will appear in the calls list.
Calls list
To enter t e calls list
Press the D WN button to select
CALLS .
Press K.
Press K again to select
CALLS LIST .
The most recently received number
will be displayed.
Press the D WN button to scroll
backwards through the calls list
towards the older calls in the list,
press the UP button to scroll
forwards through the calls list
towards the most recent calls.
To dial a number in t e calls list
When the number you wish to call is
displayed press the GREEN PH NE
button.
The number will be automatically
dialled.
▼
C K
C K
▼
To adjust ringer melody and volume
Choose from 10 different handset
ringer melodies. Useful to detemine
which handset is ringing when you
are using multiple handsets.
Press the D WN button to enter the
RIN IN AND BEEPS menu.
Press K to confirm.
Use the D WN button to scroll to
RIN IN .
Press K to confirm.
Select
EXTERNAL/INTERNAL or ALARM
as required.
Press K to confirm.
Use the D WN button to scroll
through the
MELODY options.
Press K to confirm.
You will then be asked to select the
volume level.
Use the D WN button to scroll
through select the level you require.
Press K to confirm.
The display will then show
DONE .
If you require, the ringer can be
switched off all together. The display
will show symbol to remind you
that the ringer is off.
▼
▼
C K
▼
C K
▼
▼
C K
C K
C K
On-Air 1100 Executive 4/7/00 1:48 pm Page 19

On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
20
Keypad beeps and tones
You can set your handset to beep or
play a tone when you press a button
on the keypad.
The BT On-Air Executive will come
already set to ON.
Press the D WN button to enter the
RIN IN AND BEEPS menu.
Press K to confirm.
Use the UP button to scroll to
BEEPS .
Press K to confirm.
The display will show either
KEYPAD
or BATTERY LOW .
Use the UP and D WN buttons to
highlight the one you wish to select
then press the K button to confirm.
The display will show
Press the button to turn N or
FF.
Press K to confirm.
The display will then show
DONE .
▼
C K
C K
C K
▲
▲
▼
✔ON

To set t e time
Press the UP button to scroll to BASE .
Press K to confirm.
Use the UP button to scroll to
BASE
SETTIN S
.
Press K to confirm.
Use the UP or D WN buttons to
scroll to
DATE/TIME .
Press K to confirm.
Use the UP or D WN buttons to
scroll to
SET TIME .
Press K to confirm.
Enter the time in 24 hour clock
format.
Press K to confirm.
The display will then show
DONE .
▲
▲
▲
▼
▲
▼
C K
C K
C K
C K
C K
To set t e date
Use the UP button to scroll to BASE .
Press K to confirm.
Use the UP button to scroll to
BASE
SETTIN S
.
Press K to confirm.
Use the UP or D WN buttons to
scroll to
DATE/TIME .
Press K to confirm.
Use the UP and D WN buttons to
scroll to
SET DATE .
Press K to confirm.
Enter the date DD/MM/YY.
Press K to confirm.
The display will then show
DONE .
▲
▲
▲
▼
▲
▼
C K
C K
C K
C K
C K
123
On-Air 1100 Executive 4/7/00 1:48 pm Page 20