O erating Instructions
Pairing
Pairing is comp ete y by defau t at the factory during production. If the pairing
does not appear to be successfu , p ease comp ete the pairing process as fo ows:
1. Press the channe button on the monitor to se ect a channe , and the
corresponding number icon wi appear on the screen, demonstrating 4
choices.
2. Keep pressing the Pair button at the back of the monitor for 3 seconds
unti the power indicator ight f ashes. Then within 10 seconds, press the
Pair button on the back of the camera for 3 seconds unti the picture
appears on the monitor, as shown be ow:
•In monitoring mode, press the Power
button of the monitor to switch between
Fahrenheit and Ce sius temperature modes.
•In monitoring mode, if no operations have
occurred within 60 seconds, the monitor
wi go into power saving mode. Press any
key to recover.
Talking
1. Keep pressing the Ta k button on the monitor and the ta k indicator wi
i uminate. The ta king icon wi a so appear on the screen. You can then
ta k into the microphone and your voice wi be heard from the camera.
Note: The ta king function is two-way, however it wi on y work one way at
a time. The voice from the camera end cannot be heard whi e pressing the
ta k button.
2. Let go of the ta king button, and the voice from the camera side can be
heard from the monitor side.
•The vo ume indicator wi increase
when the baby cries ouder.
•If the monitor is in power saving
mode (b ank screen) and the baby
cries, the screen wi automatica y
activate, restoring the picture to the
monitor screen.
If you have any questions, concerns or suggestions, lease do not hesitate to
contact the Kogan customer su ort team.
