Bubbli BBBBY24MONA User manual

Baby Monitor
BBBBY24MONA
Quick Start Guide
Product
What's in the box
Camera x 1 Monitor x 1 Power
Adaptor x 2
Camera
Temperature
Sensor
Indicator
Infrared Lamp
Camera Lens
Microphone
Power Button
Photosensitive
Sensor
Monitor
Speech
Vo ume
Conversation
Indicator
Power Indicator
Microphone
Antenna
Power Button/
Temperature
Conversion
Channe
Vo ume +
Vo ume -
Ta k Button

Product S ecifications
CAMERA RECEIVER
Items Specifications Items Specifications
Imaging Sensor Type 1/4” Co our CMOS LCD Screen Type 3.5” TFT LCD
Effective Pixe s 640 x 480 LCD Screen Reso ution 320 x 240
Horizonta View Ang e 62° (Max) Bandwidth 3MHz
Minimum I umination <15Lux (IR OFF) / 2 (IR ON) Transmission Rate 3Mbps
Night Vision Distance 5M≥Consumption Current 950MA (Max)
Sound Detection Sensitivity -38db≤Sound Detection Sensitivity -38db≤
Transmission Frequency 2400 ~ 2483.5 MHz Operating Frequency 2400 ~ 2483.5 MHz
Transmission Power 17dbm Transmission Power 17dbm
Receiving Sensitivity -80dbm (Min) Receiving sensitivity -80dbm (Min)
Modu ation Mode GFSK Demodu ating Method GFSK
Unobstructed Effective Range 300M≥Unobstructed Effective Range 300M (Max)
Power Supp y DC +5V Power Supp y DC +5V
Operating Temperature -10°C ~ +45°C Operating Temperature -10°C ~ +40°C
Operating Humidity 20% ~ 85%RH Operating Humidity 15% ~ 85%RH
Dimensions (LxWxH) 80 x 80 x 170mm Dimensions (LxWxH) 119.7 x 81.9 x 27mm
Weight 110g Weight 180g
A of the specifications are subject to minor change without prior notice.
Start u and Power off
Camera
1. Connect the camera and power out et with the
provided power adapter.
2. Keep pressing the power button of the camera
for 3 seconds unti the indicator ight is on,
showing the camera is working.
3. Keep pressing the power button of the camera
for 3 seconds unti the indicator ight goes out,
showing the camera has stopped working.
Monitor
1. Keep pressing the power button of the monitor for 3 seconds unti the
indicator ight is on, showing the monitor is working.
2. Keep pressing the power button of the monitor for 3 seconds unti the
indicator ight goes out, showing the monitor has stopped working.
Charge
When the battery icon on the screen of the monitor turns red and f ashes, this
indicates that the battery is running ow. The indicator ight turns orange when
charging, and wi disp ay in green when the monitor is fu y charged.

O erating Instructions
Pairing
Pairing is comp ete y by defau t at the factory during production. If the pairing
does not appear to be successfu , p ease comp ete the pairing process as fo ows:
1. Press the channe button on the monitor to se ect a channe , and the
corresponding number icon wi appear on the screen, demonstrating 4
choices.
2. Keep pressing the Pair button at the back of the monitor for 3 seconds
unti the power indicator ight f ashes. Then within 10 seconds, press the
Pair button on the back of the camera for 3 seconds unti the picture
appears on the monitor, as shown be ow:
•In monitoring mode, press the Power
button of the monitor to switch between
Fahrenheit and Ce sius temperature modes.
•In monitoring mode, if no operations have
occurred within 60 seconds, the monitor
wi go into power saving mode. Press any
key to recover.
Talking
1. Keep pressing the Ta k button on the monitor and the ta k indicator wi
i uminate. The ta king icon wi a so appear on the screen. You can then
ta k into the microphone and your voice wi be heard from the camera.
Note: The ta king function is two-way, however it wi on y work one way at
a time. The voice from the camera end cannot be heard whi e pressing the
ta k button.
2. Let go of the ta king button, and the voice from the camera side can be
heard from the monitor side.
•The vo ume indicator wi increase
when the baby cries ouder.
•If the monitor is in power saving
mode (b ank screen) and the baby
cries, the screen wi automatica y
activate, restoring the picture to the
monitor screen.
If you have any questions, concerns or suggestions, lease do not hesitate to
contact the Kogan customer su ort team.