bumpboxx Sound Stik MATCO User manual

OPERATION MANUAL
TWS PAiRiNG
INSTRUCTiONS
1. Power on both Bumpboxx Sound Stik devices. They will
automatically start in Bluetooth mode and make sure both
Bumpboxx Sound Stik devices have an open Bluetooth
connection (Please turn off Bluetooth on all previously
paired cell phones within range)
2. Hold the TWS (Pause/Play) button on your master unit
(the one closest to your device) for 5 seconds then
release. You will hear a chime within 10 seconds after
releasing. This means you have successfully established
your TWS connection.
(If this is unsuccessful, power down both devices, make sure all
previously paired cell phones and devices have turned off Bluetooth
and start again and use the slave Sound Stik as the master)
3. Just like you would normally do, find your Bumpboxx
Sound Stik on your Bluetooth list on your phone and pair to it.
4. Crank up the volume and enjoy.
BEST CARE
AND INSTRUCTIONS
• Once the unit is unpacked and has charged for
3-4 hours for the first time, you may power on and use.
• The unit may be used during the charging process.
WARNING:
This product can expose you to chemicals including lead
and lead compounds, which are known to the state of
California to cause birth defects or other reproductive harm.
For more information go to www.p65warnings.ca.gov
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE;
AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER’S AUTHORITY TO OPERATE EQUIPMENT.
HOW TO
VIDEOS
VIEW OUR
www.bumpboxx.com/howto

ACCESSORIES
Bluetooth Profile: AVRCP
Audio Codec: SBC
LED Equalizer w/ 3 Modes
Battery Life: Up to 12 hrs.
Recharge Time 3-4 hrs.
USB-C Charging
Battery Type: 3.7v 4000 mAh
Dimensions: 21.86 X 1.86 X 3.13 in.
Speakers: 2 Full-Range 2” Drivers
Peak Power: 20W
Dual Passive Radiators
Strong Neodymium Anti-Slip Magnetic
Backing To Stik
Full TWS Pairing Capabilities
Connectivity: Bluetooth, Micro SD Card,
AUX In
Bluetooth Version: 5.3
Operating Range for Bluetooth: Up to 80 ft.
USB-C Cable x1 3.5 mm AUX Cable x1 User Manual x1
CAREFULLY READ THIS OPERATING MANUAL TO USE
AND ENJOY THIS UNIT PROPERLY.
KEEP THIS MANUAL FOR FURTHER REFERENCE.
PANEL FUNCTIONS
FUNCTION DESCRIPTION
SPECiFiCATiONS
1. Power On
2. DC 5V Input
3. LED Power Indicator
4. TF Card
5. AUX In
6. Previous / Volume Down
7. Play / Pause (TWS Mode)
8. Next / Volume Up
9. Mode
BATTERY AND POWER
1. Speaker features rechargeable battery
2. Charge your battery using the included 4A charging cable
3. LED indicator light will light up red while charging
and then turn off once fully charged.
4. Full recharge cycle takes 3 to 4 hours
5. Full battery could be used for up to 12 hours
6. Please charge the battery for 3 to 4 hours
before using for the first time
BLUETOOTH CONNECTION
1. Once powered on, the speaker is ready for pairing
with a mobile device
2. Scan for the speaker's name "SoundStik"
3. Pair via Bluetooth
4. Once paired, the volume and tracks can be controlled by both
speaker's control panel and by the paired mobile device
MODE CONTROL
1. Insert 3.5mm AUX cable into AUX input
(Unit automatically changes to AUX mode)
2. Insert Micro SD Card into TF slot
(Unit automatically changes to TF mode)
3. Press select previous or next track, press to play or pause
4. TWS Mode - Link 2 SoundStick units together for
a True Wireless Stereo experience