Bunker Hill Security BI-RTK10-BLK User manual

USER MANUAL
RECOVERY TRACKS
SKU: BI-RTK10-BLK / BI-RTK10-RED
V1.0

BUNKER INDUST, a disruptive force that aims to help people pursue their passions in the great
outdoors with rugged looks and impeccable safety, is a professional provider of a full lineup of
4x4 upgrades and accessories that enable off-road enthusiasts to upgrade their vehicles and
pursue an outdoor lifestyle.
At BUNKER INDUST, we regularly spend time outdoors to understand your desire to have an
ideal rig. But that move is challenging and time-consuming. But it's what sets us apart.
Because we are driven by enthusiasm, not commission, and share the same passion for
vehicle upgrade as you do.
When you decide to build a vehicle to hit the trails, BUNKER INDUST is here to prepare it with
virtually all the off-road parts required to keep you safe, and make sure your vehicle looks and
performs as you want it to.
BUNKER INDUST, Build Your Own Legend.
1
Caution must always be executed when using recovery equipment. It is recommended that
people not participating in the recovery are at least 25m away from the vehicle whilst the
recovery process is undertaken or depending on the situation, appropriate safety precautions
are to be taken.
Caution should also be taken when leaving the vehicle after the recovery has been completed,
as the surrounding ground surface may have changed.
Your engine must be turned off when positioning the tracks under the wheel.
Never position recovery tracks under the wheel if the wheel is spinning.
The recovery tracks are not to be used for any other purpose than stated in this User Manual.
The recovery tracks are designed as a device for assisting in the process of removing your
vehicle from muddy and sandy grounds.
The recovery tracks are not designed for use on hard rocky surfaces or as a bridging device.
Never climb under the vehicle whilst performing any type of recovery work.
Do not spin your wheel on the recovery tracks as this may cause damage to the tracks.
Never push your vehicle whilst engaging the track.
It is suggested that you use warning safety devices i.e. hazard lights when performing a
vehicle recovery to alert oncoming drivers of your circumstances.
GENERAL SAFETY WARNINGS

CARE AND MAINTENANCE
Dirt, mud, grit and sand are abrasive and can damage the recovery tracks. Always clean the
recovery tracks after use by using a hose to remove any debris.
Allow the recovery tracks to dry completely before storing.
2
CONTENTS
2 x BUNKER INDUST Recovery Boards
2 x Nylon Leashes
1 x User Manual
SPECIFICATIONS
Recovery Board Material:
Color:
Leash Material:
Product Dimension:
Nested/Stacked Height:
Net Weight:
Maximum Load:
Ambient Temperatures:
BI-RTK10-BLK
Black
BI-RTK10-RED
Red
UV-Stabilized Automotive Grade Polypropylene
Nylon
L 91.5cm x W 31.3cm x H 7.6cm
(L 36.02’’ x W 12.32’’ x H 2.99’’) (Each)
H 9.5cm (3.74’’) (Pair)
4.6 kg (10.14lbs)
10 tons (22,046lbs)
-10°C ~ 70°C (14°F ~ 158°F)

When entrapped, stop immediately and turn the vehicle off. Do not continue to spin the
wheels and dig in deeper.
To recover your vehicle, use the end of the recovery track as a shovel to clear the area
immediately in front of the wheels in the intended direction of travel.
Create a gently sloping formation in the soft ground of the direction the vehicle is intended to
travel. Place the tracks hard against the tyres as shown in the diagram to make it easy for the
tyres to be able to engage the teeth.
Shift into your lowest gear and move slowly and carefully onto the tracks. Avoid wheelspin
when on the tracks. Slowly accelerate to gain vehicle momentum before leaving the tracks
and entering onto a more stable road surface.
In the event there is difficulty in gaining grip onto the recovery tracks, reverse the vehicle onto
the already compressed ground, then move forward with sufficient momentum to mount the
recovery tracks.
Another option is to place materials available (branches, gravel, etc.) onto the already
compressed ground, reverse onto the added materials, then place the recovery tracks
immediately in front of the newly created surface area, followed by driving onto the recovery
tracks as described above.
3
INSTRUCTIONS FOR USE
1.
3.
4.
2.

BUNKER INDUST warrants that each pair of recovery tracks that is purchased while this
Warranty is in effect will be free from defects in materials and workmanship during the limited
lifetime warranty from the date of receiving the product from BUNKER INDUST or its
authorized distributor/dealer. If it is believable to be defective during the Limited Lifetime
Warranty Period, BUNKER INDUST will, at its option, replace it with the same or similar product
or will issue a refund for the defective BUNKER INDUST product.
And BUNKER INDUST will pay for the cost of shipping or transportation of a defective
component.
This warranty terminates if a purchaser transfers the product to any other person. And please
retain your purchase receipt for your records.
Please ensure that the BUNKER INDUST recovery tracks should be used and maintained in
accordance with safety warnings listed in the user manual, and should be used for the
purpose for which they were designed.
THIS LIMITED WARRANTY DOES NOT COVER:
damage due to non-compliance with the product's “Instructions for Use” (including but not
limited to, for example, burning, melting or breaking of the product caused by spinning tyres;
or damage caused by using the product on hard or rocky surfaces);
normal wear and tear;
damage through abuse, neglect, misuse, or as a result of any accident or in any other manner;
the product though damaged, is still intact, serviceable and capable of performing its intended
function, and is not defective;
modification or alteration in any way;
property or vehicle damage whilst using the recovery tracks.
If further information or investigation is required or if the claim does not meet the
requirements under our warranty, BUNKER INDUST'll let you know.
WARRANTY