Burndy ACC-FWT User manual

ACC-FWT ACC-F1-270
Document Number 50086394 Rev A
© 2017 BURNDY LLC.
Page 1 of 3
Washer, Electrical Equipment Bond
ACC CABLE CLIP
INSTALLATION INSTRUCTIONS
For ACC-FWT or ACC-F1-270 (Cable Tray)
Burndy LLC recommends that the sufficient details of the installation be
submitted to the AHJ for approval before any work is started.
OR

ACC-FWT
ACC-F1-270
Document Number 50086394 Rev A
© 2017 BURNDY LLC.
Page 2 of 3
INSTALLATION LOCATIONS
Important notes:
1. Clips may accomodate 12-28 ga galvanized steel cable tray
2. Weight rating: up to 1lb per clip
PV Module Frames
CABLE TRAY
Install clips at locations noted
Blue: ACC-FWT or Red: ACC-F1-270

DETAIL 2
ACC-FWT
DETAIL 1
ACC-F1-270
Document Number 50086394 Rev A
© 2017 BURNDY LLC.
Page 3 of 3
Customer Service Department
7 Aviation Park Drive
Londonderry, NH 03053
1-800-346-4175
1-603-647-5299 (International)
CLIP INSTALLATION
Install all clips to the module frame at the desired location.
Then snap in cable tray to bottom row of clips.
Finally, flex cable tray closed, and insert into top row of clips
MODULE FRAME
CABLE TRAY
ACC-FWT
ACC-F1-270