Burris SIGNATURE LRF 2000 User manual

SIGNATURE LRF 2000
LASER RANGEFINDER

TABLE OF CONTENTS
Safety and Operation Precautions .............................................
Product Map ..............................................................................
Internal Display Element ............................................................
Eyepiece Adjustments ................................................................
Battery......................................................................................
Mode Set Up / Operation...........................................................
Internal Display Brightness / Options.........................................
Ranging.....................................................................................
LOS vs. HOR and Angle Compensation........................................
Specifications..............................................................................
Problems and Solutions...............................................................
Care and Maintenance................................................................
Warranty...................................................................................
3
5
6
7
7
8
10
12
13
15
16
17
18

3
SAFETY AND OPERATION PRECAUTIONS
The Burris Signature LRF 2000 rangefinder employs an eye safe FDA Class 1
Laser in its operation. Outside of the United States, the IEC is the governing body
over laser products and has classified the Burris Signature LRF 2000 as Class 3R.
Even so, there are a few precautions that are important to remember:
•Do not depress the POWER button while aiming at a human eye or while looking
into the optics from the objective side
•Do not leave the Signature LRF 2000 within the reach of small children
•Do not take the product apart as it may cause an electric shock
•Do not attempt to use any power source other than a CR2 battery (or
equivalent) - the Burris Signature LRF 2000 is designed to prohibit accessing
any other external power supply.

4
Congratulations on purchasing a Burris®Signature LRF 2000. This compact optic
combines laser rangefinding capability with high performance HD lenses, letting
you quickly determine a precise distance to your target with the push of a button.
•Eye safe laser measures targets out to 2,400 yards or 2,194 meters.
•Three ranging modes for maximum precision: Auto, Sport and Hunt.
•Distances can be displayed as line-of-sight or horizontal with angles of degree.
•The Signature LRF 2000 is nitrogen-filled for waterproof, fog proof performance.
•Outer surfaces are rubber armored for protection and a sure grip.
•Adjustable eyepiece ensures a clear view.

5
SIGNATURE LRF 2000

6
INTERNAL DISPLAY ELEMENTS
The internal display on the Signature LRF 2000 will display the ranging reticle,
distance to the target, measurement units (yards or meters), target angle, low
battery indicator and ranging modes.

7
EYEPIECE
The eyepiece on the Signature LRF 2000 is adjustable to ensure a crisp view
of the target.
LASER RANGER FINDER OPERATION
Install Battery
The laser rangefinder is powered by a CR2 lithium battery. The battery
compartment is located on the back of the unit below the eye piece. Open the
battery compartment and install the battery + side up.
ADJUSTABLE FOCUS ON THE DIOPTER
INSERT CR2 BATTERY WITH
+POSITIVE END FACING OUT

8
MODE SETUP
Settings Menu
To power on press the range button. Then to access the settings menu, press and
hold the Mode button for 2 seconds. The first menu screen to appear is the Ranging
Mode selection. Press the Power button to change the active menu setting option.
The selected setting will flash.
Press the Mode button to select the current setting and advance to the next menu
option. To exit the settings mode at any time, press the Mode button for 2 seconds
or wait for 12 seconds to automatically return to normal ranging operation.
MODE BUTTON
LEFT SIDE ONLY
POWER / RANGING
BUTTON

9
MODES OF OPERATION
Once you’ve accessed the settings menu, press the Power button to select between
Auto, Sport or Hunt modes.
Auto Mode – displays the range of the target with strongest signal
Sport Mode – displays the range of the closest target in a group. This
mode has a short delay when ranging.
Hunt Mode – displays the furthest range of a group of targets. This is
useful when ranging through branches or tall grass.
UNIT DISPLAY
Ranged distances can be in Yards or Meters. The default selection is Yards. To
change the units, press the Power button to select between the Yards or Meters.
Press the Mode button to make your selection.

10
DISPLAY OPTIONS
There are five display options:
• LOS - line-of-sight only
• HOR – horizontal distance only
• LOS and HOR – line-of-sight and horizontal
• LOS and ANG – line -of-sight and angle
(+ above horizontal, - below horizontal)
• HOR and ANG – horizontal and angle
(+ above horizontal, - below horizontal)
The factory default is line-of-sight.
INTERNAL DISPLAY BRIGHTNESS
The brightness of the display can be adjusted for optimal viewing in bright or
dark situations. To change the brightness settings, press the Power button to
choose levels from 1 to 5. To select the desired level, press the Mode button. After
selecting a brightness the LRF will return to normal operation.