Bush DS-A332B User manual

3.Make connections
2.Insert remote control batteries
1.Unpack your DVD Player
STANDBY/ON
ACCESSORIES:
User manual
USER
MANUAL
SEARCH
REPEAT A-BRPT
MENU
CLEAR
STOPSTEPPAUSE
VOLUME
PAL/NTSC
ANGLE
MUTE
AUDIO
F.FWDF.REV NEXTPREV
ZOOM
SETUP
1 2 3
456
7 8 9
0 10+
SUBTITLE
OSD
V.MODE
PROG
TITLE
Quick Guide
Quick Guide
2) Insert two AAA batteries. 3) Close the cover.1) Open the cover.
Notes:
Do not insert batteries into the remote control in the wrong direction.
Do not charge, heat, open, or short-circuit the batteries. Do not throw batteries into a fire.
Do not use different types of batteries together, or mix old and new batteries.
If the remote control does not function correctly or if the operating range becomes reduced, replace all
batteries with new ones.
Make sure to match the + and - on
the batteries to the marks inside the battery compartment.
Quick Guide
3) Connecting to a TV with Audio/Video cable
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
RVIDEO
YCB/ PB CR/ PR
2-CHAUDIO O UT
If the TV has an S-video input, connect the DVD player with an S-video cable .
When using an S-video cable, do not connect the yellow video cable.
(not supplied)
To video input(yellow)
To audio inputs(red, white)
To S-video input
To S-video output
1) Connecting to a devices with HDMI faucet (not supplied)
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB/PB CR/ PR
2-CHAUDIO O UT
HDMI
2) Connecting to a TV with Scart cable (not supplied)
To Scart input
To Scart output
SCART OUTPUT
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
RVIDEO
YCB/ PB CR/ PR
2-CHAUDIO O UT
4) Connecting to a audio system and TV equipped with YUV video input
To audio inputs of the amplifier
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output To CB/PB video output
To CR/PR video output
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB/PB CR/ PR
2-CHAUDIO O UT
5) Connecting to an amplifier equipped with a digital audio input and TV
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB/PB CR/ PR
2-CHAUDIO O UT
Coaxial cable
To COAXIAL
type digital
audio input
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output To CB/PB video output
To CR/PR video output
DS-A332B
HELPLINE: 0870 600 3030

4.Basic playback
Stop playback
1. Press STOP button to go to stop mode, the TV
screen will show the start logo.
2. Press ENTER/PLAY to playback to resume play-
-back from the location where playback is stopped
or from the beginning of the disc.
3. Press STOP twice to stop completely.
Previous and Next
During playing, press PREV key can back to
start of this chapter, then each press this key will skip
a chapter still the start of the disc.
Each press of NEXT during playing will skip
the current chapter and play the next one.
key
Single step playback
1. Press STEP continuous to single step forward
to the next frame in the video.
2. Press ENTER/PLAY to resume normal playback.
Pause playback
1. Press PAUSE to pause playback (still mode).
The sound will be muted during still mode.
2. Press ENTER/PLAY or PAUSE to resume normal
playback.
Preparations
When you want to view a disc, turn on the TV and
select the video input connected to the DVD player.
Fast forward and Fast reverse
1. Press F.FWD to fast forward through the disc.
Each time the F.FWD button is pressed, the
fast forward motion speed changes.
2. Press ENTER/PLAY to resume normal playback.
3. Press F.REV to fast reverse through the disc.
Each time the F.REV button is pressed, the
fast reverse motion speed changes.
4. Press ENTER/PLAY to resume normal playback.
Basic playback
1. Press STANDBY/ON in the front panel, the DVD
player turns on and the TV screen will display
the start logo. If a disc is already in the tray, it
will begin to play once the power is on.
2. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
3. Press OPEN/CLOSE to close the disc tray,
the playback will automatically start.
4. Some discs may start playback with a menu,
use the cursor button on the remote control to
select menu options and press ENTER/PLAY to
start, or press digits to select a menu options
directly.
Quick Guide
DS-A332B
HELPLINE: 0870 600 3030

STANDBY/ON
USER MANUAL
MODEL: DS-A332B

18
TROUBLE SHOOTING
SPECIFICATIONS
19
CONTACT DETAILS 20
TABLE OF CONTENTS
01
SAFETY PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS 04
NOTICE 05
07
ACCESSORIES and PANEL
08
BASIC CONNECTION
10
REMOTE CONTROL
11
BASIC PLAYBACK
12
ADVANCED PLAYBACK
13
SPECIAL FUNCTION PLAYBACK
14
SYSTEM SETUP
PLAYABLE DISCS 06

SAFETY PRECAUTIONS
01
The lightning flash with arrowhead symbol, within an equila-
teral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage " within the product's en-
closure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for CLASS II (Double Insulation).
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE, DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
WARNING:
When replace the direct plug in power supply or a separable, cord-connected power
supply, the replacement must be exact duplicate, or one recommended by the manu-
facturer.
CAUTION:
This product utilizes a laser.
Use of controls or adjustments or performance of procedures other than those
specified here in may result in hazardous radiation exposure.
Do not open the cover and do not repair yourself. Refer servicing to
qualified personnel.
DANGER: Visible and invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.

SAFETY PRECAUTIONS
02
CONNECTION TO POWER
Before connecting, check that the voltage indicated on the appliance (bottom of the appliance) corresponds
with the main voltage in your home. If this is not the case, consult your dealer and do not use.
This appliance may be fitted with a non-rewirable plug. If you need to change the fuse in a non-rewirable plug,
the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until a replac-
ement is obtained (available from the appliance manufacturer).
If the plug has to be changed because it is not suitable for your socket, or becomes damaged, it should be cut
off and appropriate plug fitted following the wiring instructions. The plug removed must be disposed of safely
as insertion into a mains socket is likely to cause an electrical hazard.
This equipment must be disconnected from the mains when not in use.
Do not allow this unit to be exposed to rain or moisture.
For your own safety read the following instructions carefully before
attempting to connect this unit to the mains.
You should only plug the appliance into a 230V-240VAC, 50Hz supply. Connecting it to other power sources
may damage the appliance.
The wires in this mains lead are coloured in
accordance with the following code:
BLUE OR BLACK = NEUTRAL
BROWN OR RED = LIVE
IMPORTANT
The colours of the wires in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
Caution
To prevent electric shock disconnect
from the mains before removing the cover
The blue wire must be connected to the terminal marked with the letter N or coloured black.
The brown wire must be connected to the terminal marked with the letter L or coloured red.
If a 13 Amp (BS1363) fused plug is used it must be fitted with a 13A fuse conforming to BS1362 and beASTA
approved.
If in doubt contact a qualified electrician

SAFETY PRECAUTIONS
03
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product, it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the product.
This product incorporates copyright protection technology that is protected by U.S.
patents and other intellectual property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.

04
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
on a bed,
and

05

* Player is DVD-Video, DVD+/-R, DVD+/-RW, CD-DA, CD-R, CD-RW compatible.
Region Management Information
This DVD Player is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the DVD
disc does not correspond to the Region number of this DVD Player, this DVD player can-
not play that disc.
This Region number of this DVD player is .
Audio &
Video
Audio
Picture
Disc size 12cm
single side, single layer / single side, double layer
PAL and NTSC DVD disc
Playback time 135min / 240min max.
Disc size 12cm / 8cm
CD disc
Playback time 74min/20min max.
JPG format disc
Getting Started
JPEG
Disc types
06

STANDBY/ON
ACCESSORIES and PANEL
07
ACCESSORIES
FRONT PANEL
REAR PANEL OUTPUT
Audio/Video cable .................... 1
Remote control ......................... 1
User manual .............................. 1
Batteries..................................... 2
Quick Guide............................... 1
User manual
USER
MANUAL
5. OPEN/CLOSE
6. PLAY/PAUSE
7. STOP
1. STANDBY/ON
2. TRAY
3. LED SCREEN
4. REMOTE CONTROL SENSOR
SEARCH
REPEAT A-BRPT
MENU
CLEAR
STOPSTEPPAUSE
VOLUME
PAL/NTSC
ANGLE
MUTE
AUDIO
F.FWDF.REV NEXTPREV
ZOOM
SETUP
1 2 3
456
7 8 9
0 10+
SUBTITLE
OSD
V.MODE
PROG
TITLE
2
CLASS 1
LASER PRODUCT
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB / PB CR / PR
2-CH AUDIO OUT
SCART OUTPUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
S/N:
U.S. Patent Nos. 6,836,549; 6,381,747;
7,050,698; 6,516,132; and 5,583,936.
Dolby and the double-D symbol are
registered trademarks of Dolby
Laboratories.
HDMI
Model no.: DS-A332B
POWER SOURCE: 110V-240V~ 50/60Hz 12W
2345681 7
5. VIDEO OUTPUT
6. Y, CB/PB, CR/PR OUTPUT
7. S-VIDEO OUTPUT
8. SCART OUTPUT
1. POWER LINE INPUT
2. HDMI OUTPUT
3. 2 CHANNEL OUTPUT
4. COAXIAL OUTPUT
Quick Guide
Quick Guide

BASIC CONNECTION
08
BASIC CONNECTION
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
RVIDEO
YCB / PB CR / PR
2-CH AUDIO OUT
Connecting to a TV with Audio/Video cable
If the TV has an S-video input, connect the DVD player with an S-video cable.
When using an S-video cable, do not connect the yellow video cable.
To video input(yellow)
To audio inputs(red, white)
To S-video input
To S-video output
Connecting to a devices with HDMI faucet
Easy DVD hook-up guide: For the best possible picture, simply follow these guidelines and use the best
cables your TV accepts: Normal: Composite video Good: S-video
Better: Component video Best: HDMI video
HD DVD playback: Enjoy your entire DVD collection in brilliant high definition format. This DVD player
upconvert DVDs to your HDTV's native resolution, whether it's 480p, 720p, 576p, 1080i and 1080P.
HDMI output: Use this output for HD conversion and experience stunning HD images and crisp digital
audio.
To Scart input
To Scart output
Connecting to a TV with Scart cable
DIGITALAUDIO OUT / VIDEOOUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB / PB CR / PR
2-CH AUDIO OUT
HDMI
SCART OUTPUT
DIGITALAUDIO OUT / VIDEOOUT
COAXIAL S-VIDEO
L
RVIDEO
YCB / PB CR / PR
2-CH AUDIO OUT

BASIC CONNECTION
DIGITALAUDIO OUT / VIDEO OUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB / PB CR / PR
2-CH AUDIO OUT
Connecting to an amplifier equipped with a digital audio input and TV
Coaxial cable
To COAXIAL
type digital
audio input
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output To CB/PB video output
To CR/PR video output
09
Connecting to a audio system and TV equipped with YUV video input
To audio inputs of the amplifier
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output To CB/PB video output
To CR/PR video output
DIGITALAUDIO OUT / VIDEOOUT
COAXIAL S-VIDEO
L
R VIDEO
Y CB / PB CR / PR
2-CH AUDIO OUT

SEARCH
REPEAT A-B RPT
MENU
CLEAR
STOPSTEPPAUSE
VOLUME
PAL/NTSC
ANGLE
MUTE
AUDIO
F.FWDF.REV NEXTPREV
ZOOM
SETUP
1 2 3
456
78 9
0 10+
SUBTITLE
OSD
V.MODE
PROG
TITLE
1
3
7
2
4
5
6
8
9
10
11
12
13
17
15
16
14
19
20
21
22
25
26
23
24
27
28
29
REMOTE CONTROL
10
REMOTE CONTROL
18
1. OPEN/CLOSE DISC TRAY
2. V.MODE
3. OSD (On Screen Display)
4. SUBTITLE
5. TITLE
6. SEARCH
7. REPEAT
8. A-B REPEAT
9. SETUP
10. ENTER/PLAY
11. ZOOM
12. FAST REVERSE
13. FAST FORWARD
14. PAUSE
15. STEP
16. MUTE
17. ANGLE
18. STANDBY
19.DIGITS AND 10+ BUTTONS
20. PAL/NTSC
21. CLEAR
22. MENU
23. CURSOR
24. PROGRAM
25. NEXT
26. PREVIOUS
27. AUDIO
28. STOP
29. VOLUME +/- (Volume control)
FunctionFunction
LEFT RIGHT
DOWN
UP

BASIC PLAYBACK
11
Basic playback
1. Press STANDBY/ON in the front panel, the DVD
player turns on and the TV screen will display
the start logo. If a disc is already in the tray, it
will begin to play once the power is on.
Note: Different status for LED display and power
indicator light of front panel:
Under working mode: LED displays "HI", power
indicator light is blue;
Under standby mode: no display in LED, power
indicator light is red;
Power is not connected: no any display in LED
or power indicator light.
2. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
3. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs may not playback automatically,
you can press ENTER/PLAY button to start
playback.
4. Some discs may start playback with a menu,
use the cursor button on the remote control to
select menu options and press ENTER/PLAY to
start, or press digits to select a menu options
directly.
NOTES:
1.
1. Press STOP button to go to stop mode, the TV
screen will show the start logo. As some disc the
player can recall the location where stopped, such
as DVD.
2. Press ENTER/PLAY to playback to resume play-
-back from the location where playback is stopped
or from the beginning of the disc.
3. Press STOP twice to stop completely.
Stop playback
Previous and Next
During playing, press PREV key can back to
start of this chapter, then each press this key will skip
a chapter still the start of the disc.
Each press of NEXT during playing will skip
the current chapter and play the next one.
key
Single step playback
1. Press STEP continuous to single step forward
to the next frame in the video.
2. Press ENTER/PLAY to resume normal playback.
Pause playback
1. Press PAUSE to pause playback (still mode).
The sound will be muted during still mode.
2. Press ENTER/PLAY or PAUSE to resume normal
playback.
Preparations
When you want to view a disc, turn on the TV and
select the video input connected to the DVD player.
Fast forward and Fast reverse
1. Press F.FWD to fast forward through the disc.
Each time the F.FWD button is pressed, the
fast forward motion speed changes.
2. Press ENTER/PLAY to resume normal playback.
3. Press F.REV to fast reverse through the disc.
Each time the F.REV button is pressed, the
fast reverse motion speed changes.
4. Press ENTER/PLAY to resume normal playback.

ADVANCED PLAYBACK
12
IMPORTANT NOTE:
THE FOLLOWING FUNCTIONS ARE APPLICABLE ONLY TO DVD DISCS. IF OTHER DISC FORMATS ARE
PLAYED, SCREEN DISPLAYAND OPERATION WILL BE DIFFERENT.
OSD
Press this button and the screen will display some
information about disc, such as : " Title Elapsed " ,
" Title Remain ", " Chapter Elapsed ", " Chapter
Remain " and " Display Off ".
SUBTITLE
Press this button and the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (The number of language depends on disc).
V.MODE
This button can set VIDEO output among "CVBS" ,
"YUV" or "RGB" .
Note: The screen disappear when press this button,
press this button continuously until the screen turn
normal.If there are picture interferences or no picture,
please press "V.MODE" to correct it.
CLEAR
This button can be used to clear any incorrect
information that may have been input.
PAL/NTSC
Press this button will switch among NTSC, PAL.
A-B REPEAT
Press " A-B RPT " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
MENU
Press this button to display root menu, select item
according to your preference. (This key is valid to
DVDs possessing multi-layer menu.)
PROGRAM
Press this button and the screen will display info
window , press digits button to input the program
number what you want, when finished, move the
cursor to select the " Start " logo, at this time the unit
will start program playback and the screen will display
"Program" logo.
If you want to cancel this function, press " STOP "
and then press ENTER/PLAY .
ANGLE
For discs with this feature, pressing this key to view
action from different angles.(Depending on the DVD)
SEARCH
Press this button one time, the screen will display
search menu, the second will cancel. in search menu,
you can use UP/DOWN cursor button to select item
what you wanted, Then press ENTER/PLAY button to
confirm.
According to some DVD discs, pressing this button
will display the title menu, you can then press the
digits to select the preferred chapter.
TITLE
ZOOM
Press this button to zoom into the picture.
Each time the button is pressed, the magnification
level will change.
REPEAT
Press REPEAT and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the four press will cancel repeating.

SPECIAL FUNCTION PLAYBACK
13
AUDIO CHANNEL CHOOSE
Press this button on remote control to change the
mode of audio.
For example: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Note: When press this button continuously, you must
above 3 seconds interval.
VOLUME and MUTE
Press " + " at the right of VOLUME to increase
volume, " - " to decrease to volume. The first press
of MUTE will display MUTE (no voice), the second
press will return to normal playback.
HDMI, Hi Definition Digital Multimedia Interface supports EDID and DDC2B. This connection operates quickly
and conveniently, providing the best in both audio and video playback.
HDMI can transfer uncompressed, high-resolution picture and multi-channel audio digitally up to speeds of
5 GBps. HDMI can support all ATSC HDTV standards not only meet resolution 1080i/1080P, which can supply
the highest picture quality. but also support DVD Audio and other most advanced digital audio format, and
support 8 channel 96kHz digital audio transmission. You only need one HDMI line connected, relieve audio
connected.
At the same time, the spare space which HDMI standard supplied can apply in the video updating. HDMI can
collocate with HDCP (High-bandwidth Digital Content Protection), avoid copyright film being copyed without
authorization.
JPEG DISC PLAYBACK
When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession.
In the menu, use UP or DOWN in the cursor to select a file,then press "ENTER/PLAY", the file will be play with
a slide-show. Press PREV or NEXT to select the previous or the next picture. Press PAUSE to pause the
current picture for enjoying, when press ENTER/PLAY, it will return to normal playing. Press ZOOM to start
zoom function. When ZOOM is on, press F.REV and F.FWD to select different enlargement ratio, When ZOOM
is on, press CURSOR key can move the enlargement picture.
HDMI FUNCTION
Some slide-show transition modes are provided, use "PROG" key to select. Customer can set
transition effects for each picture.
Image Rotation
There are four modes to rotate a picture: "Invert", "Mirror", Left", and "Right". These operations are allowed
only when a picture is being displayed normally and will be cancelled automatically when a new picture is
displayed. The arrow key is used to select the different rotation modes:
Up - Invert/Normal Left - Turn left
Down - Mirror/Normal Right - Turn right

SYSTEM SETUP
14
1.5 SCREEN SAVER
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture on the screen whenever
the DVD player is idle for a certain time.
1.3 OSD LANGUAGE
On Screen Display (OSD) Language: Users can
select the whole setup menu and on-screen display
language.
When you press SETUP key on the remote control,
the setup menu will be displayed.
1.Within the setup menu, you can use UP, DOWN,
LEFT and RIGHT buttons on the remote control
to move the cursor, and then press the
ENTER/PLAY button to make your selection.
Press LEFT can return the previous menu.
2.To exit setup menu, you can press SETUP
menu.
The TV Display which select the different ratio of
display format and the screen of TV, There are
various types of display on screen for different
matches between Disc and TV .
1.1 TV DISPLAY
Note:
No matter which display format is selected, a
picture recorded in standard 4:3 format always
displays in the 4:3 aspect ratio.
The display format of DVD titles may vary; please
refer to the information that accompanies your
specific DVD title.
If the DVD title is recorded in 16:9 wide display
format while the TV is a standard 4:3 screen,
horizontal compression of the image will result.
Some DVD titles may be recorded in special
formats. In such cases, the DVD titles will always
appear on the screen in their original format,
regardless of which TV display format you select.
Setup TV screen format, video type and all DVD
functions.
1. GENERAL SETUP PAGE
General Audio Dolby Video Preference
TV Display
Angle Mark
Osd Lang
Captions
Screen Saver
Last Memory
PS
On
Eng
Off
On
Off
Go To General Setup Page
General Setup Page
1.2 ANGLE MARK
ANGLE MARK: Users can select a particular camera
angle when playing a DVD that offers multiple angles.
1.4 CAPTIONS
CAPTIONS: For hearing-impaired people. The program
can be displayed with recorded explanatory captions.
Note: This is valid for a disc that has captions.
1.6 Last Memory
LAST MEMORY: This function is convenient when
you want to continue viewing a disc from the point
where you were watching before. Unlike the resume
function, the Last Memory function is effective even
the DVD is removed from the player.
2. AUDIO SETUP PAGE
General Audio Dolby Video
Go To Audio Setup Page
Audio Setup Page
Speaker Setup
Spdif Setup
Preference

2.1.1 DOWNMIX MODE: Sets front speakers to
LT/RT STEREO.
2.1 SPEAKER SETUP PAGE
General Audio Dolby Video
LT/RT
Stereo
Set Downmix Mode
Speaker Setup Page
Downmix Ltrt
Preference
SYSTEM SETUP
15
DUAL MONO: If your amplifier / decoder has
Dolby Digital output, you may select stereo, left
mono, right mono, or mixed mono mode for your
amplifier decoder.
3.1 DUAL MONO
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
to minimize disturbances . This setting can dyna-
mically lower the volume and still keep the original
tone quality. This is the range, measured in deci-
bels(dB), between the loudest and the quietest
sound registers in a soundtrack.
3.2 DYNAMIC
4. VIDEO SETUP PAGE
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is
output through the back-paneI connections for
2-CH audio out.
2. SPDIF/RAW or SPDIF/PCM: This surround sound
format is output to a Dolby Digital / DTS decoder
through the coaxial connector on the back-panel
of the product.
2.2.2 LPCM OUTPUT
LPCM (Linear Pulse Code Modulation) OUTPUT:
Includes LPCM 48K , LPCM 96K for audio format.
2.2 SPDIF SETUP PAGE
2.2.1 SPDlF OUTPUT
SPDlF OUTPUT MODE: Sets the audio outputs.
General Audio Dolby Video
Spdif Off
Spdif/Raw
Spdif/Pcm
Setup Spdif
Spdif Setup Page
Spidf Output
Lpcm Out 48k
Preference
3. DOLBY DIGITAL SETUP PAGE
Dolby Video
General Audio
Dual Mono
Dynamic
Dolby Digital Setup
Go To Dolby Digital Setup
Preference
Dolby Video
General Audio
Video Setup Page
Video Output
Resolution
Quality
HDMI Setup
CVBS
Go To Video Setup Page
Preference

SYSTEM SETUP
16
4.3.6 SATURATION
SATURATION: sets the saturation of the video.
Press right button the TV will display a value. Press
LEFT/RIGHT button to adjust, then press ENTER/
PLAY button to confirm and return upon menu.
4.3.7 LUMA DELAY
LUMA ( Luminance ) DELAY: Sets the luminance
delay of video output depend on the TV's brightness,
color. It sets 1T commonly for DVD.
4.4.2 AUDIO SOURCE
AUDIO SOURCE: You can set the audio source.
4.3.2 BRlGHTNESS
BRIGHTNESS: Sets the brightness level of video
output.
Press right button the TV will display a value
Press LEFT/RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return upon
menu.
4.3.4 GAMMA
GAMMA: Sets the gamma value of the Video.
Press right button the TV will display a value. Press
LEFT/RIGHT button to adjust, then press ENTER/
PLAY button to confirm and return upon menu.
4.3.3 CONTRAST
CONTRAST: Sets the contrast level of Video output.
4.3.5 HUE
HUE: Sets the hue value of the Video.
Press right button the TV will display a value. Press
LEFT/RIGHT button to adjust, then press ENTER/
PLAY button to confirm and return upon menu.
4.4 HDMI SETUP PAGE
General Audio Dolby Video
On
Off
HDMI Setup
HDMI Setup
HDMI Setup
Audio Source
On
Auto
4.4.1 HDMI
HDMI: You can turn HDMI On or Off.
Preference
The preference setting is only active with no disc,
and the setting is effective on each time power on
till exchanging the saved setting.
5. PREFERENCE SETUP PAGE
Dolby Video
General Audio
Preference Page
Tv Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
PAL
Eng
Eng
Eng
Go To Preference Page
Preference
VIDEO OUTPUT: Sets the video output.
4.1 VIDEO OUTPUT
4.2 RESOLUTION SETUP PAGE
RESOLUTION: You can select the resolution output
of the player to match your TV.
4.3 VIDEO QUALITY SETUP PAGE
4.3.1 SHARPNESS
SHARPNESS: Sets the sharpness level of video
output.
Dolby Video
High
Medium
Low
MID
00
00
None
00
00
1 T
Preference
General Audio
Sharpness
Video Quality Setup
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay