Bush KBB258 User manual

Instruction manual
KBB258 Party Lights Boombox

Ifyou require any technical guidance or find that your product isnot operating as intended, a simple solution can often be foundin the Troubleshooting
You’ll soon be enjoying your new Party Lights Boombox
It all begins here, with your instructions. Don’t worry, there’s
nothing too technical coming up. Just simple, step-by-step
guidance to get you up and running quickly. Sound good? Then
let’s get started.
Help and Guidance
We’re here to help you get the most from your Party Lights Boombox. Should you require
any guidance, a simple solution can often be found online at:
www.bush-support.com
If you still require further assistance, call one of our experts on 0345 604 0105.

3
section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
Contents
6
10
12
13
14
16
17
18
19
22
24
25
26
27
1
2
3
4
5
Safety information
Safety information
Getting to know your Party Lights Boombox
Ready? Let’s begin
Connection
Power connection/Inserting batteries(optional)
Auxiliary connection
Using your Party Lights Boombox
Time setting/Inserting CD
Playing a CD
Programmed play mode
Other information
Technical specification
Product support
Troubleshooting
Help and assistance
Disposal
Guarantee
20
FM radio/AUX in Function
Bluetooth Connection/Party Lights Operation

1Safety information

Safety information
Important- Please read these instructions fully before
installing or operating
Safety information 6
If you require any technical guidance or find that your product isnot operating as intended,asimple solution can often be foundin the Troubleshooting
Please take the time to follow the instructions in this owner’s guide carefully.
It will help you set up and operate your system properly and enjoy all of its
advanced features.
Please save this owner’s guide for future reference.
The product label is located on the back of the product.
Do not use this apparatus near water or moisture.
Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in
a wet basement, near a swimming pool, or anywhere else that water or moisture is
present.
Do not leave it in high temperatures as electronic devices and plastic parts may
warp in heat.
Do not block or cover slots, holes or openings on the product by placing on soft
furnishings such as carpets, rugs or beds as these are provided for functionality and/
or ventilation to ensure safe operation of the product.
Do not store in dusty or dirty areas.
Servicing is required when the apparatus has been damaged in any way:
such as liquid has been spilled or objects have fallen into the apparatus; the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not attempt to open the product. This product does not contain any user
serviceable parts. Unauthorized handling of the device may damage it and will void
your warranty.
Opening or removing covers may expose you to dangerous voltages or other hazards.
To prevent risk of fire or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles.
If this product will not be used for a long period of time, make sure that all of the
batteries are removed from the battery compartments.
•
•
•
•
•
•
•
•
•

Safety information
Important- Please read these instructions fully before
installing or operating
Safety information 7
section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
The exclamation point within an equlateral
trangle is intended to alert the user to the
presence of important operation and
maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sucient
magnitude to constitute a risk of electric
shock to persons..
Fig 1. Fig 2.
The use of apparatus in moderate climates.
No naked flame sources,such as lighted candles,should be placed on the apparatus.
To preserve our environment,dispose of used batteries according to your local laws or regulations.
The mains plug is used as disconnect device,the disconnect device shall remain readily operable.
To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture
Do not place objects filled with water,such as a vase,on the apparatus.
The battery shall not be exposed to excessive heat such as sunshine,fire or the like.
Invisible laser radiation when open and interlocks defeated.Avoid exposure to beam of laser.
This equiment is a Class II or double insulated electrical appliance,it does not require
a safety connection to electrical earth.

Getting to know your
Party Lights Boombox 2

Getting to know your Party Lights Boombox
You’ll be up and running in no time
Getting to know your Party Lights Boombox
10
If you require any technical guidance or find that your product isnot operating as intended, a simple solution can often be foundin the Troubleshooting
Ready? Let’s begin...
Please read these instructions carefully. They contain important information which will
help you get the best from your product and ensure safe and correct installation and
operation.
If you require any further assistance, our technical experts are happy to help. For full
details, refer to the product support section at the end of these instructions.
Accessory Accessory
Fig 3.
Accessories
1. AC power cord 2. Instruction manual
Instruction manual
ÿÿÿÿÿÿÿ
KBB258 Party Lights Boombox

Getting to know your Party Lights Boombox
You’ll be up and running in no time
11
section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
Fig 4.
1.
1
4
12 13
14
15
16
17
5
23
CD Compartment
9.
11.
10. Earphone jack
12.
13.
2. FM Stereo Indicator
3. Power Indicator
4. LCD Display
5. 14.
6. 15.
7.
8.
Power button
Stop button
Skip backwords
Programme/ Repeat button
Clock setting button
16.
17.
Skip forwards
Light switch button
Play/Pause
Speaker & Party Lights
Tunning
Telescopic Antenna
Volume
18. CD/AUX/BT/FM Switching button
7
68911
10
19
18
Getting to know your Party Lights Boombox
20
14
19.
20.
AC Line in
AUX in jack
21
22
21.
22.
Battery Compartment
Handle

Getting to know your Party Lights Boombox
Getting to know your Party Lights Boombox
You’ll be up and running in no time
12
If you require any technical guidance or find that your product isnot operating as intended, a simple solution can often be foundin the Troubleshooting
Fig 5.
Connection
Please consider carefully where your boombox will be situated and make sure that it is:
• on a flat and stable surface
• within 1.4 metres of a power socket
• where you can fully extend the wire radio aerial
• at least 1 metre away from other electrical appliances to avoid interference.
1. Extend the wire radio aerial. A vertical position is recommended for maximum signal
strength.
2. Plug the mains power plug into the mains power wall socket and switch on (Fig 5).
Then press power button, the red power LED to the right of the display will light up.

Getting to know your Party Lights Boombox
Getting to know your Party Lights Boombox
You’ll be up and running in no time
13
section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
Power connection / Inserting batteries (optional)
Before inserting the batteries (not included), please ensure that the Boombox
is unplugged from the mains power supply.
1.Underneath the Boombox, remove the battery compartment cover.
2. Insert 6 “C” size (UM-2) batteries(Fig 6),making sure to note the ‘+’ and ‘-‘ markings
and position the batteries the correct way around.
3.Replace the battery compartment cover, making sure that it ‘clicks’ home.
Note: When the battery power is low, you will notice that the audio quality will be a
little distorted and the volume will be quieter. Please switch off the CD Cassette
Boombox and replace the batteries.
Fig 6.

Getting to know your Party Lights Boombox
Getting to know your Party Lights Boombox
Note: It is recommended that you unplug the audio cable from the Line in socket after
you have finished listening to your external device, as the CD player cannot be used
whilst an audio cable is connected. Please wait for approximately 15 seconds after
unplugging the audio cable, for the Boombox to return to CD mode.
You’ll be up and running in no time
14
If you require any technical guidance or find that your product isnot operating as intended, a simple solution can often be foundin the Troubleshooting
Auxiliary connection
Using a 3.5mm audio input connection cable (not included), allows for a quick and easy
connection to an external sound source.
1. Connect one end of a 3.5mm audio connection cable to the headphone or auxiliary
out socket of your secondary device, connect the other end to the Line in socket on
the back of your Boombox.
2. Slide the Mode switch to ‘CD (AUX)’.
3. Press the Play button on your external device to start playback through the Boombox
speakers.
4. To gain optimal volume levels, adjust the volume control on both the secondary
device and on the Boombox.

Using your
Party Lights Boombox 3

Using your Party Lights Boombox
Let’s get started
16
If you require any technical guidance or find that your product isnot operating as intended, a simple solution can often be foundin the Troubleshooting
Note: On first use, please remove the protective card from the CD compartment.
2. Place and audio CD with its label side upward in the CD compartment and close
the lid of the CD player.
3. The total number of tracks on the CD will appear in the LED Display after a few
seconds.
Check that your Boombox is in CD (AUX) mode.
1. Lift up the lid of the CD player on the front edge, where there is a scooped recess.
Getting to know your Party Lights Boombox
Time setting
Inserting a CD
1.Press and hold the CLOCK button;24H will be displayed flashing.
2.When 24H is flashing,press the CLOCK button until the hour digit flashes.
3.Using the SKIP(forward or backward) button to select the hour.
4.Press CLOCK button to confirm the hour.The minute digits will now flash
on the display.
5. Using the SKIP(forward or backward) button to select the minutes.
6.Press CLOCK button to confirm the minutes and complete the time setup.

section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
17
Note: If you stop or pause playing a CD for 20 minutes, your Boombox will switch o
automatically.
1. Press the CD PLAY/PAUSE button. The Play/Program Indicator will light and the CD will
start playing from the first track.
2. Adjust the Volume control to obtain the desired sound level from the Built-in Speakers.
3. To suspend playing, press the CD PLAY/PAUSE button and the track no. of the playback
track will flash.
To resume playing, press the CD PLAY/PAUSE button again.
4. You can choose to play your favorite track directly by pressing either the Skip Forward
button or Skip Backward button. The LCD Display will indicate the correct track number
selected.
5. To locate a particular passage within a track, keep the CD Search Forward button or CD
Search Backward button depressed until it is found.
6. To repeat a particular track, press the CD Repeat button until the CD Repeat Indicator
flashes.
7.To repeat the entire CD, press the CD Prog/Repeat button again until the CD
Repeat Indicator lights steadily.
8.To repeat off, press the CD Prog/Repeat button again until the CD Repeat
Indicator disappear.
Using your Party Lights Boombox
Let’s get started
Playing a CD
Your Boombox will play audio CDs as well as CD-Recordable (CD-R) and CD-Rewritable
(CD-RW) CDs. Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.
Getting to know your Party Lights BoomboxGetting to know your Party Lights Boombox
Getting to know your Party Lights Boombox
Getting to know your Party Lights BoomboxGetting to know your Party Lights Boombox

If you require any technical guidance or find that your product isnot operating as intended,asimple solution can often be foundin the Troubleshooting
1. In CD stop mode, press the PROG/REPEAT button once. PROG LCD will appear and
blink in the LCD Display.
2. Press the CD Skip Forward button or CD Skip Backward button to select the song to
be programmed.
3. Press the PROG/REPEAT button again to store selection. The LCD display will blink to
prompt for input.
4. Press the CD Skip Forward button or CD Skip Backward button to select the next
song to be programmed and press the PROG button to store the second selection.
5. You may repeat steps 2 – 4 to program up to a total of 20 tracks.
6. Press the CD PLAY/PAUSE button to start playing in the programmed sequence.
7. To cancel programmed play, press the CD STOP button.
To exit programmed play mode, press the CD STOP button twice
Using your Party Lights Boombox
Let’s get started
Programmed play mode
In programmed play mode, you can program the play order of the tracks on your CD.
You can program up to 20 tracks in total.
18 Getting to know your Party Lights Boombox

section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
1. Set the FUNCTION selector switch to the FM position.
2. Adjust the sound level using the VOLUME control.
3. Rotate the TUNING control to set the frequency required.
4. To insure maximum FM tuner reception, the Telescopic Antenna should be fully
extended and rotated to obtain the best possible station reception.
19
Using your Party Lights Boombox
Let’s get started
FM radio
Getting to know your Party Lights Boombox

Bluetooth Connection
section of these instructions, or online at www.bush-support.com If youstill require further assistance, call one of our experts on 0345 604 0105.
1. Slide the function switch to “BT”.
2. Active the Bluetooth function on your Bluetooth smart device.
3. Scan Bluetooth devices from your smart device and select
"BUSH KBB-258BT".
4. Once paired successfully, you can play music.
5. The device will go into auto standby if there is not activity for
15minutes
Party Lights Operation
By pressing Light button,Six different modes of party lights for
selection.
Getting to know your Party Lights Boombox
20