IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
1. Read these instructions and keep them for future reference.
2. Carefully follow instructions and take heed to all warnings.
3. Do not use this apparatus near water.
4. Clean amplifier housing only with a slightly damp cloth.
5. Do not block any of the ventilation openings. Install in accordance with
the manufacturers instructions.
6. Do not install near any heat source such as radiators, heat registers,
stoves, or other electrical devices (including amplifiers) that produce heat.
7. Do not defeat the safety purpose of the grounding type plug. A grounding type
plug has two blades and a third prong. The third prong is provided for your safety.
If the provided plug does not fit easily into your outlet, consult an electrician for
replacement of the obsolete outlet before attempting to power up the amplifier.
8. Prevent the power cord from being walked on or pinched, particularly at the plug
or at the point where it exits from the amplifier.
9. Use only attachments and accessories specified by the manufacturer. When
uncertain about specifications, please first consult the manufacturers website
and see the FAQs; if still uncertain please call the phone numbers listed in this
manual for tech support.
10. When this apparatus is placed on a cart, stand or table, make sure that it is
sufficiently stable and can accommodate the weight of this unit. When placed
on a cart with wheels, use extra caution so that it does not tip over when the cart
is moving.
11. Unplug this unit during lightning storms or when it is unused for an extended
period of time. This device may be plugged into a surge protector or power strip,
but should NOT be plugged into a UPS (uninterruptible power supply).
12. DO NOT LEAVE THIS AMPLIFIER IN STAND BY MODE WHEN NO ONE IS IN
ATTENDANCE. For safety and to ensure long life, turn the amplifier power switch
to the OFF position when unit is not being used.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way. This would include damage to the
power supply cord or plug, whenever liquid has been spilled or objects have fallen
into the apparatus, when the apparatus has been exposed to rain or moisture,
when it does not operate normally, or whenever it has been dropped.
14. Where the MAINS plug or an appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
