BVE AXSPVSC-INSIGNIA Installation manual

AXSPVSC - INSIGNIA
For use with Insignia LCD TV’s.
Online Service Manuals available at: www.broadcastvision.com
PROGRAMMING INSTRUCTIONS
AXSPVSC-INSIGNIA
(THE CONTROLLER WILL NOT OPERATE UNTIL YOU PROGRAM IT)
To program for the Insignia LCDs:
Enter *, 1, SOURCE, 12, SOURCE
(Press buttons sequentially, not simultaneously)
_________________________________________________________
IF YOUR APPLICATION DIFFERS FROM ABOVE CALL CUSTOMER
SERVICE FOR ASSISTANCE 1(888)330-4283 EXT. 3

Troubleshooting Techniques
LCD not responding to the Controller
- Check top make sure the IR emitter is properly attached over the IR sensor on the front of the
TV.
- Check to make sure the IR emitter cable going to the TV has not been damaged. If the cable
does show signs of damage replace the emitter portion of the controller cable.
- Reprogram the controller following the Programming Instructions above.
Default Internal Volume Change
If the default volume on the LCD is too loud or soft, it is possible to adjust the internal
controller volume:
- First use the Volume up or down buttons to set the Volume bar midway on the TV screen.
- Press *, 5, Source (sequentially, not simultaneously).
- Use the Volume up and down buttons until the sound is at the desired medium default level
- Press Source to exit the volume adjustment mode.
Turn Off the Auto-Off Feature
The Broadcastvision Entertainment LCDs have an Auto-Off feature that automatically
turns the LCD off when not in use after 15 minutes
- To deactivate the feature, press: *, 4, Source
Additional Programing Codes
After programming the controller for the correct screen and Set Top Box, these
additional codes can be entered to customize the operation of the controller:
-
*, 0, Source, Volume Up/Down, Source –Enables/Disables the keep alive feature to keep your set
top box from going into sleep mode. Factory default is on.
-
*, 4, Source –Toggles on and off the TV’s Auto-Off feature. Factory default is off.
-
*, 5, Source, Vol up/down –Allows you to set the internal volume gain of the controller in cases
where the audio is too loud or quiet after initial installation. You must hit the Source button again
to exit this mode after you have reached your desired volumelevel.
-
*, 6, Source –Enables the controllers internal volume control. Use this setting for
situations when you will not be controlling the TV’s volume.
-
*, 8, Source –Toggles on and off set top box volume control. For use when you would prefer
to use this instead of the TV’s volume control. Factory default is off.
-
*, Guide, Source, Prev, Source –This disables the guide button to keep the controller out of the
guide mode when the set top box does not have a guide feature (DTA’s). Factory default is on.

BroadcastVision Entertainment : www.broadcastvision.com
Tel (888) 330-4283, Email: support@broadcastvision.com Page 3
Broadcastvision Entertainment Terms and Conditions
BVE Stock Items Returned for Credit
BVE manufactured products may only be returned for credit with written authorization from BVE
within 30 days of the original invoice date. A 25% restocking fee will be charged for all returns. All
products being returned to BVE require a Return Authorization number. Products must be returned
in original condition with the original packaging, components and support material. Credit is
contingent upon inspection of returned items.
Return Authorizations
A Return Authorization number must be issued from BVE prior to any item being returned for credit,
repair or exchange. Items returned without approval will be refused and returned to the sender.
Requests for a Return Authorization number may be made to our Customer Service Department at
1-888-330-4283.
Repairs and Replacements
A warranty repair of BVE manufactured product includes parts, labor and the return GROUND
shipping to the customer. Repairs made while under warranty are covered for the duration of the
valid warranty period. Non-Warranty repairs receive a “Repair Warranty” of 90 days parts and labor
only. Warranties do not include on-site service. Advance Replacements of items in question may be
arranged ifthe productiswithin 30 days of invoice date and issubject to product availability. Advance
Replacements must be secured by the customer with a valid Credit Card or Net30 terms of an
account in good standing.
Shipping
Shipping dates are estimates only. Products will be shipped per the designated Shipping Method.
Paying for an accelerated Shipping Method only indicates the product will ship by that method when
the product or repair is available. BVE will not be held responsible to accelerate shipping, discount
invoices or compensate customers for loss of profits, business or goodwill due to back orders,
shortages, shipping complications, damages, product malfunction, labor, construction, nature or
delays.
Warranties
All products sold by BVE carry the original manufacturers’ warranty. Warranty begins on the invoice
date of purchase from BVE or an authorized BVE Dealer / Distributor. Warranty may alternately
begin on the date of installation with a valid Installation Completion Form from an authorized BVE
Dealer, Distributor or Installer. Warranties do not cover damage due to abuse, misuse, modification
or the result of any third party. Warranties are not transferable and cover only the original purchaser
with a valid invoice. Manufacturers will, at their option repair or replace equipment, as they deem
necessary. Warranties do not include “on-site” service.
This manual suits for next models
1
Table of contents