2. TEMPERATURE CALIBRATION
Youmightneedtocalibratethetemperaturesensorfortherstuse.Turnothecontroller,pressandholdtheMENU button for 3 seconds. Use
the +and – buttons to set the temperature value. This value can be adjusted within -8 to +8°C in 0,5°C increments.
3. SETUP TIME AND SELECT MODE
Set up actual time and weekday
After turning the controller on, press MENUbuttonandhold3seconds,thetimedisplaywillstartashing.Changetheminutesby +and –
button. Press MENU button again, and change the hours. Press MENU button again and set the day of the week: 1-Monday; 2-Tuesday etc. After
setting up time and day push the BACK button to save changes.
Select mode
Thecontrolleroersfourdierentpre-setmodes.ThePRGmodesetsuptemperatureusing4dierentprogrammedcycletimesaday.The
Comfort mode , Energy saving mode and the holiday mode keeps the assigned temperature all around the week.
You may switch between modes using MENU button.
4. SETUP PROGRAM MODE
Pre-setfactoryvaluesoftheprogrammodemightbemodiedeasyasfollows:
5. PAIRING WITH THE RECEIVER
The receiver is usually paired with the receiver; still in some cases you might need to repeat pairing, which is fast and easy:
1. Connect the receiver to the power outlet. The LED light turns on.
2. Pushthepairingbuttononthereceiver.TheLEDlightstartsashing.
3. TurnthermostatoandpressMENUfor3sec.TheLEDturnso,pairingisready.Whenyousetthetemperaturehigherthanroom
temperature, the LED will light.
Weekdays are displayed on the top left area of the screen (B) from Monday to Sunday (1-7). You can
adjust cycle times (D) and temperatures (C) for each period: one for the working days (1-5), one for
Saturday (6) and one for Sunday (7). All three periods have a daily routine of four cycles with its own
starting time and temperature value.
1. To modify values in program mode press PRGbuttonfor3seconds.Timestartsashing(A) Set
the starting time of the cycle within the period using +and – buttons, and after pushing PRG
button again, set the desired temperature value of the cycle.
2. Press PRG button and display will jump to the next cycle. Program all values of the working
days, then Saturday and Sunday.
3. You may save changes and return using the BACK button.
6. MOUNTING
Mounting on wall: Desktop:
Monday to Friday Saturday Sunday
Cycle 1 2 3 4 1 2 3 4 1 2 3 4
Time 6:30 8:00 18:00 22:30 8:00 10:00 18:00 23:00 9:00 12:00 19:00 0:00
Temperature 21°C 18°C 21°C 16°C 21°C 21°C 21°C 16°C 23°C 21°C 16°C 21°C
B
AD
C