Bvf 24-f User manual

User manual

bvfheating.com

CLOCK

Under thermostat on, press and hold button for 3s, set the clock by adjusting the knob to left or right, each press of button will go to next item setting.

BVF 24-F

RF room thermostat

Day Indicator

Clock

PRG button

On/o button

Increase / decrease temperature

Heating on icon

Key lock on

RF pairing icon (appears when pairing only)

Current PRG period

Open window mode

Mode select button

Manual mode

PRG mode

CODE PAIRING

According to the receiver’s manual.

TECHNICAL DATA

Thermostat Operating Voltage: 2 x AAA 1.5V, alkaline batteries

Backup Storage: EEPROM

Frequency: 868MHz

Receiver capacity:

24-X 3600W/16A

24-A 3600W/16A

Switching options: 5+1+1 day, 4 periods each day

Temperature settings: 5°C ~ 35°C, 0.5°C increments

Accuracy: +/- 0.5°C

Thermostat dimensions: 86mm x 86mm x 26.5mm

Color: White

IP protection rating: 20

Certication: CE

PRODUCT FEATURES

• Large display can be clearly read with the background

lighting

•Easy to t thermostat and receiver

• Knob button make it easy to use.

• 4 periods of each day programmable (5+1+1)

• The display shows the set and the measured temperature

• Compatible with 24-A, 24-P, 24-X

MODE SELECT

Press button to select PRG mode / manual mode / away mode.

User manual

bvfheating.com

PARAMETER SETTINGS

INSTALLATION

Turn o thermostat, long press Knob button to enter parameter setting page, each press of button will go to next item setting. By adjust knob to left or right to

change value setting. After setting, long press knob button to exit.

Mount the thermostat at eye level. Read the instructions fully so you get the

best from our product.

Do not install near to a direct heat source as this will aect functionality. Do not

push hard on the LCD screen as this may cause irreparable damage.

Step 1: Carefully separate the front half from the back plate.

Step 2: Screw the thermostat back plate securely on wall with provided screws

Step 3: Clip the front of the thermostat onto the back plate.

Period Wake up 1 Leave Home 2 Return Home 3 Sleep 4

Time Temp. Time Temp. Time Temp. Time Temp.

1-5 (Mon.-Fri.) 7:00 22°C 8:30 19°C 17:00 22°C 22:00 19°C

6 (Sat.) 8:00 22°C 8:30 22°C 17:00 22°C 22:00 19°C

7 (Sun.) 8:00 22°C 8:30 22°C 17:00 22°C 22:00 19°C

Menu Description Range Default

01 Temp. Oset -8°C ~ 8°C 0

02 Set Point Max. 5°C ~ 35°C 35°C

03 Set Point Min. 5°C ~ 35°C 5°C

04 Sensor Select 0: I or E 1: I & E 2: I 3: E (I = Internal sensor, E = External sensor) 2

05 Frost Protection Temp. O; 5°C ~15°C 5°C

06 Surface Temp. Display Read Only

07 High Temp. Protection 5°C ~ 80°C 32°C

09 Dead zone 0°C ~ 3°C 0°C

11 Factory reset 0: No 1: Yes, then press on/o button for 5s, until thermostat restart

12 Key lock 0 - o, 1 - on 0

14 OWD function ON/OFF select 0 - o, 1 - on 0

15 OWD Detect Time Select 2 ~ 30 mins 15 mins

16 OWD Drop temp. select (within detect time) 2 / 3 / 4°C 2°C

17 OWD Delay time select (Return to previous working status) 10 ~ 60 mins 30 mins

18 The temp. di to exit high protection mode 1°C ~ 3°C 1°C

19 External sensor temp. oset -8°C ~ 8°C 0

20 Energy optimisation 1: electric radiator 3: ceiling heating

2: heating panel 4: oor heating 2

21 Software version

22 Software version

PRG SETTINGS

Press and hold button for 3s to enter program setting.

Set the schedule (Weekday-Period-Start time-Temp.) by adjusting knob to left or right to change value setting, each press of button will go to next item setting.

Weekday is xed( Mon.-Fri., Sat., Sun.)

Default values:

KEY-LOCK FUNCTION

Under child lock ON (refer to menu12 of parameter setting ), the buttons will be locked once backlight o, if so you can long press on/o button to unlock.

OPEN WINDOW DETECTION (OWD) FUNCTION

When the Open Window detect function is enabled in the parameter setting, the system will automatically stop heating when it detects a sudden drop of room

temperature (2°C in 15 minutes as default). This is normally caused when a window or door is opened without turning o the heating device.

The device will return to the previous mode of operation after 30mins, then disappear. Press any button will exit OWD function during the heating o period.

User manual

bvfheating.com

BVF 24-P

RF receiver for infrared heating panel

TECHNICAL DATA

Operating voltage: 230V, 50/60Hz

Capacity: 10A

Frequency: 868MHz

Dimensions: 70mm x 41.5mm x 140mm

Color: White

IP protection rating: IP 20

Certication: CE

Start pairing with this button

Long press for 3 seconds

LED COLORS

Heating panel is connected or plugged in.

(Flashing)

Heating is active. (Steady)

Pairing mode. (Flashing)

PAIRING WITH 24-F THERMOSTAT. STEP BY STEP

Make sure the receiver and the thermostat is close to each other.

1. Longpress(3seconds)thecodepairingbuttononthereceiveruntilLEDstartsashingyellow.

2. Turnosender(24-F)bypressingOn/Obutton,thanlongpressbuttonuntiltheRFcodeshowsonthetopofthescreen(XXXX).

3. Rotatethemainbutton(24-F)toleftorright.icon appears for a second only.icon will not remain on the screen. Code pairing is

successful.

4. Waitforawhileuntilicondisappear.Codepairingnished.iconwillnotremainonthescreen.