C-me UF 50 User manual

UF v2 Intelligent Keyborad Controller
User’s manual
—————————————————
Model: UF 50/60/70/80
Read “Precautions” on page 5 before use
(v.1.1)
Please read this manual carefully before use.
Please keep this manual for reference.

2
Thank you for choosing CME UF v2 — Intelligent Keyborad
Controller
Please keep all the important information here
Attach your invoice or receipt here
～～～～～～～～～～～～～～～～～～～～～～～
for reference
Purchase date Serial(on the back of the keyboard)
Dealer’s name and addr.
Dealer’stel.
Warning:
zImproper connection may cause damage to the device.
Copyright
zCopyright of the manual belongs to Central Music Co. Anyone
must get a written permission from Central Music Co. before
copying any part of the manual to any kind of media.
© Central Music Co. 2007
Package list
Please check all the items in the product package:
zUSB MIDI Master keyboard 1 pcs
zUSB cable 1 pcs
zUser’s manual 1 pcs
zWIDI-XU wireless MIDI transmitter/receiver 1ps

3
Special Message Section
This product utilizes batteries or an external
power supply (adapter). Do NOT connect this
product to any power supply or adapter other
than one described in the manual, on the
product, or specifically recommended by CME.
WARNING: Do not place this product in a
position where anyone could walk on, trip over,
or roll anything over power or connecting cords
of any kind. The use of an extension cord is not
recommended! If you must use an extension
cord, make sure that the cord has the ability to
handle maximum current needed by this
product. Please consult a local electrician
when possible.
This product should be used only with the
components supplied or recommended by
CME. When used with any components,
please observe all safety markings and
instructions that accompany the accessory
product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is
believed to be correct at the time of printing.
However, CME reserves the right to change or
modify any of the specifications without notice
or obligation to update existing units.
This product, either alone or in combination
with an amplifier and headphones or
speaker(s), may be capable of producing
sound levels that could cause permanent
hearing loss. Do NOT operate for long periods
of time at a high volume level or at a level that
is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should
consult an audiologist.
IMPORTANT: The louder the sound, the
shorter the time period before damage occurs.
Some CME products may have stands and/or
accessory mounting fixtures that are either
supplied with the product or as optional
accessories. Some of these items are
designed to be dealer assembled or installed.
Please make sure that stands are stable and
any optional fixtures (where applicable) are
well secured BEFORE using.
Stands supplied by CME are designed for the
respect products only. No other uses are
recommended.
NOTICE:
Service charges incurred due to a lack of
knowledge relating to how a function or effect
works (when the unit is operating as designed)
are not covered by the manufacturer’s
warranty, and are therefore the owners
responsibility. Please study this manual
carefully and consult your dealer before
requesting service.
ENVIRONMENTAL ISSUES:
CME strives to produce products that are both
user safe and environmentally friendly. We
sincerely believe that our products and the
production methods used to produce them,
meet these goals. In keeping with both the
letter and the spirit of the law, we want you to
be aware of the following:
Battery Notice:
This product MAY contain a small
non-rechargeable battery which (if applicable)
is soldered in place. The average life span of
this type of battery is approximately five years.
When replacement becomes necessary,
contact a qualified service representative to
perform the replacement.
This product may also use “household” type
batteries. Some of these may be rechargeable.
Make sure that the battery being charged is a
rechargeable type and that the charger is
intended for the battery being charged.
When installing batteries, do not mix batteries
with new, or with batteries of different type.
Batteries MUST be installed correctly.
Mismatches of incorrect installation may result
in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate
any battery. Keep all batteries away from
children. Dispose of used batteries promptly
and as regulated by the laws in your area.
Note: Check with any retailer of household type
batteries in your area for battery disposal
information.
Disposal Notice:
Should this product become damaged beyond
repair, or for some reason its useful life is
considered to be at an end, please observe all
local, state, and federal regulations that relate
to the disposal of products that contain lead,
batteries, plastics, etc. If your dealer is unable
to assist you, please contact CME directly.

4
FCC INFORMATION (U.S.A)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual,
meets FCC requirements. Modifications not expressly approved by CME may void
your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product
use only high quality shielded cables. Cable(s) supplied with this product MUST be
used. Follow all installation instructions. Failure to follow instructions could void your
FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the limits for a Class B
Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that interference will not occur
in all installations. If this product is found to be the source of interference, which can
be determined by turning the unit “OFF” and “ON”, please try to eliminate the
problems by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or
install AC line filter(s).
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna
lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the
local retailer authorized to distribute this type of product. If you cannot locate the
appropriate retailer, please contact CME.
The above statements apply ONLY to those products distributed in the USA.

5
PRECAUTIONS
IMPORTANT
Always follow the basic precautions listed below to avoid the possibility of serious injury
or even death from electrical shock, damages, fire or other hazards. These precautions
include, but are not limited to, the follows:
1. Read and understand all the instructions.
2. Always follow the instructions on the instrument.
3. Before cleaning the instrument, always remove the electric plug from the outlet as
well as the USB cable. When cleaning, use a soft and dry cloth. Do not use gasoline,
alcohol, acetone, turps or any other organic solutions; do not use liquid cleaner, spray
cleaner or too wet cloth.
4. Do not use the instrument near water or moisture, such as bathtub, washbasin,
washing poor in the kitchen or similar places.
5. Do not place the instrument in an unstable position where it might accidentally fall
over.
6. Do not jam sinks or holes of the instrument; those sinks of holes are used for air
circulation to prevent the instrument from overheating. Do not place the instrument
near heat sink or any places with poor air circulation.
7. Do not place anything on the power cord. Make sure the power cord is set on a safe
place, so nobody will step on it and no body will trip over it.
8. Do not overload the outlet and the AC cable to avoid fire or electrical shock.
9. Do not insert anything in the instrument, which may cause fire or electrical shock. Do
not splash any kind of liquid to the instrument.
10. Do not disassemble the instrument in case of accidental electrical shock.
11. Always take the instrument to a qualified service center in need of repair. You will
cause yourself in danger if you open or remove the cover, and improper assembly
may cause electrical shock in the future use.
12. Unplug all the connectors and take the instrument to a qualified service center if
anything in the below listed happens:
A. The power cord or connector get hurt or worn out.
B. Any liquid get in the instrument.
C. The instrument gets rain or water splash.
D. The instrument does not work properly after following all the instructions
regarding to the trouble shootings.
E. The instrument falls down or gets broken.
F. The instrument functions poorly.
13. Do not use the instrument when thundering; otherwise the thundering may cause
long-distance electrical shock.
14. Do not use the instrument when there is a gas leak nearby.
15. Switch off the product when inside or near aircraft. The use of RF product in aircraft is
illegal. It may be dangerous to the operation of the aircraft
16. Do not use the product on the ground without the permission of the ground crew in
the airport.
17. Observe ‘Turn off the RF communication device such as Mobile Phone’ signs, such
as those near stores of fuel, chemicals or explosives
18. The operation of some medical electronic devices, such as hearing aids and
pacemakers, may be affected if the product is used next to them. Observe any
warning signs and manufacturer's recommendations.
19. Please do not use the product near any precision instrument, which may cause noise
or abnormal operation to the instrument.
20. Switch off the product at a refueling point, such as a petrol station, even if you are not
refueling your own car.
21. Do not store or carry flammable or explosive materials in the same compartment
where a radio transmitter, such as the product, is placed.
22. Electronic vehicle systems, such as anti-lock brakes, speed control and fuel injection

6
systems are not normally affected by radio transmissions. The manufacturer of such
equipment can advise if it is adequately shielded from radio transmissions. If you
suspect vehicle problems caused by radio transmissions, consult your dealer and do
not switch on the product until it has been checked by qualified approved installers.
Efficient Use
For optimum performance with minimum power consumption, note the following:
The product has an internal antenna. Do not cover part of the internal antenna of
the product with your hands. This affects communication quality, may cause the
product to operate at a higher power level than needed and may shorten
communication and standby times.
Radio Frequency Energy
The product is a low-power radio transmitter and receiver. When it is turned on, it
intermittently receives and transmits radio frequency (RF) energy (radio waves).
The system that handles the communication controls the power level at which the
product transmits.
Exposure to Radio Frequency Energy
The product is designed not to exceed the limits for exposure to RF energy set
by national authorities and international health agencies. * These limits are part
of comprehensive guidelines and establish permitted levels of radio wave
exposure for the general population. The guidelines were developed by
independent scientific organizations such as ICNIRP (International Commission
on Non-Ionizing Radiation Protection) through periodic and thorough evaluation
of scientific studies. The limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health, and to account
for any variations in measurements.*Examples of radio frequency exposure
guidelines and standards that the product is designed to conform to:
ICNIRP, “Guidelines for limiting exposure to time-varying electric, magnetic,
and electromagnetic fields (up to 300 G Hz)-International Commission on
Non-Ionizing Radiation Protection (ICNIRP)”. Health Physics, vol. 74. pp,
494-522, April 1998.
99/519/EC Council Recommendation on the limitation of exposure to the
general public to electromagnetic fields 0 Hz-300 GHz, Official Journal of the
European Communities, July 12,1999.
ANSI/IEEE C95.1-1992. “Safety levels with respect to human exposure to radio
frequency electromagnetic fields, 3kHz to 300 GHz”. The Institute of Electrical
and Electronics Engineers Inc., New York, 1991.
FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal
Communications Commission (FCC), August 1996.
Radio communications (Electromagnetic Radiation Human Exposure) Standard
2003, MediaAuthority.
Keep this manual in safe place
CAUTION:
Setting up
Do not connect the instrument when thundering.
Do not set up the cord or outlet to a moist place, except for that the outlet is specially
designed for moist places.
When the power cord is connected to the AC outlet, do not touch the naked part of
the cord or the connector.
Always follow the instructions carefully when setting up the product.
Avoid using any extending USB cable with poor quality or too long extending USB
cable.
Do not use USB HUB to connect the product.

7
Make sure the computer USB port has adequate power supply, otherwise the
product does not work properly.
WARNING:
zDo not expose the instrument to rain or moisture, to avoid fire or electrical shock.
Other precautions:
zKeep the instrument away from electrical interface sources, such as fluorescent light
and electrical motors.
zKeep the instrument away from dust, heat and vibration.
zDo not expose the instrument to sunlight.
zDo not place heavy objects on the instrument; do not place containers with liquid on
the instrument.
zDo not touch the connectors with wet hands
zCentral Music Co. is not responsible for any damage or data loss caused by
improper operation to the instrument.
zAll the pictures and the LED display in the manual are used for demonstration; they
may be different from the real product.
Trade marks
CME, UF, WIDI are CME trade marks. Other brands and names belong to the
respective owners.
Features
UF 50/60/70/80 “UF v2” series
zProfessional semi-weighted keyboard with aftertouch for UF 50/60/70
zProfessional weighted Hammer Effect Keyboard with aftertoun for UF 80
zMulti-function expansion slot for firewire expansion, sound modue expandsion,etc.
z9 faders
z11 function buttons
z8 multi-function knobs
zBuilt-in wireless MIDI interface
zVarious temperaments and scales.
zU-CTRL function by CME, so you can press one key for the software remote control
zUSB plug and play
zFirmware upgradable via USB

8
Content
1General view .........................................................................................................................10
1.1 Front panel ..............................................................................................................10
1.2 Rear panel ...............................................................................................................12
2Installation guide...................................................................................................................13
2.1 Power supply...........................................................................................................13
2.2 Power on order........................................................................................................13
3Connections ..........................................................................................................................14
4Basic operation .....................................................................................................................15
5Turning on..............................................................................................................................17
5.1 Normally turning on................................................................................................17
5.2 Driver installation....................................................................................................17
5.3 Turning on with initilizaing.....................................................................................17
6Basic functions......................................................................................................................18
6.1 Quickly selecting a voice ........................................................................................18
6.2 Transpose and octave ..............................................................................................18
6.3 Using knobs and faders...........................................................................................19
6.4 Using SEQ control buttons......................................................................................19
6.5 Using function shortcut buttons ..............................................................................19
6.6 Pitch wheel and modulation wheel..........................................................................19
6.7 Pedal........................................................................................................................19
6.8 Breath controller......................................................................................................20
6.9 Aftertouch ...............................................................................................................20
6.10 Bank seleting and program change (PATCH).........................................................20
6.10.1 Bank MSB Select..........................................................................................20
6.10.2 Bank LSB Select...........................................................................................20
6.10.3 Program Change ..........................................................................................21
6.11 Keyboard Channel...................................................................................................21
7Advanced functions..............................................................................................................22
7.1 Dual mode...............................................................................................................22
7.2 Split mode ...............................................................................................................22
7.3 Scale........................................................................................................................22
7.4 Temperament...........................................................................................................23
7.5 DRAWBAR.............................................................................................................23
7.6 TEMPO...................................................................................................................23
7.7 MIDI RESET message............................................................................................23
8ASSIGNING ..........................................................................................................................24
8.1 Assigning Controllers..............................................................................................24
8.2 Assigning Notes......................................................................................................24
8.3 Assigning Program changes....................................................................................24
9SYSTEM settings .................................................................................................................25
9.1 Keyboard V.Curve...................................................................................................25
9.2 A.Touch V.Curve....................................................................................................25
9.3 Pedal A Polarity.......................................................................................................25
9.4 Pedal A Type............................................................................................................26
9.5 Pedal B Polarity.......................................................................................................26
9.6 Pedal B Type ...........................................................................................................26
9.7 Local On/Off...........................................................................................................26
9.8 Data Dump..............................................................................................................26
10 DISPLAY ........................................................................................................................27
10.1 Program display ......................................................................................................27
10.2 Bank MSB display ..................................................................................................27
10.3 Bank LSB display ...................................................................................................27
10.4 Note display ............................................................................................................27

9
10.5 Controller display....................................................................................................27
11 WIDI (wireless MIDI) ....................................................................................................28
11.1 Searching for a MIDI device...................................................................................28
11.2 WIDI On/Off...........................................................................................................28
11.3 Setting Frequency....................................................................................................28
11.4 Selecting a radio Channel........................................................................................28
12 U-CTRL mode...............................................................................................................30
13 Registration BANK access..........................................................................................31
14 Firmware UPDATE.......................................................................................................31
15 EXPANSION..................................................................................................................31
16 Appendix ........................................................................................................................32
16.1 Initial status.............................................................................................................32
16.2 Assignable controllers list.......................................................................................34
16.3 GM voice list...........................................................................................................38
16.4 Scale list..................................................................................................................39
16.5 Note list...................................................................................................................44
16.6 Temperament list.....................................................................................................45
16.7 Velocity curve list....................................................................................................46
16.8 After touch curve list...............................................................................................47
16.9 MIDI route ..............................................................................................................48
17 Troubleshooting ............................................................................................................49
18 Specifications ................................................................................................................50
19 MIDI Implementation Chart .........................................................................................52

10
1 General view
1.1 Front panel
The keyaboard
There are four models for the UF v2 series, including UF 50(49 keys), UF 60(61
keys), UF 70(76 keys) and UF 80(88 keys). All the keyboards in the UF v2
series are equipped with velocity response and aftertouch.
Velocity response means when you play the keyboard, it will
respond to the initial force used to strike the keys.
Aftertouch means after you press and hold a key, it will continue
to respond to additional pressure applied to the keys.

11
The pitchbend wheel:
It can change the pitch up and down, and when released it will automatically
return to the center position.
The modulation wheel:
It will make the sound vibrant, and when released it will be at the current
position.
SEQ TRANSPORT:
They are used for sequence control or remote control.
WIDI search：
Use this button to search for another WIDI (wireless MIDI) device.
The layer switch button：
This button will switch the function layers for faders and knobs, so you can
control many things convenienly.
The knobs(KN 1-8)：
They are used to send continuous control chahge data.
The faders(CS 1-9)：
They are used to send continuous control chahge data.
The DISPLAY：
You will see all the information here.
The OCTAVE/ TRANSPOSE buttons：
They are used to change the keyboard pitches.
The SHIFT button：
It is used with other control parts for more functions.
The function shortcut buttons (F1-F6):
They are used for fast function select or to send user-defined parameters.
The DATA dial:
Use it to change the value quickly.
The EXIT/ENTER buttons:
Use them to confirm or cancel data changes, and use them for bank operation.

12
1.2 Rear panel
zThe expansion board slot: it is used for an expansion board, such as an firewire
expansion board or an sound module expansion board, etc.
zThe mainboard terminals: All the connector ports and switches are located here.
zMIDI OUT port x1
zPEDAL A jack：1/4" TRS x1, can be used for volume or sustain pedal.
zPEDAL B jack：1/4" TRS x1, can be used for volume or sustain pedal.
zBREATH (Breath control or BC) jack: 1/8" TRS x1, compatible with YAMAHA BC3.
zUSB port: to make computer connection for MIDI data transfer and get the USB bus
power
zDC IN(AC adaptor power in port)：Connect the AC adaptor here
zPOWER ON/OFF switch: Use it to turn the instrument on/off.

13
2 Installation guide
2.1 Power supply
1. Make sure the power switch is set to OFF.
2. Connect the AC adaptor to the POWER IN port in the rear panel.
3. Make sure the AC requirement of the AC adaptor is compliant with the local AC
supply, then connect the AC adaptor to the power supply outlet.
Make sure the AC requirement of the AC adaptor is compliant with the local
AC supply, otherwise it will cause severe damage to the AC adaptor or the
instrument, and it may cause electrical shock!
Only the AC adaptor designed for this product should be used. If you cannot
find the right adaptor or the adaptor does not work, please contact local CME
dealers. The usage of an improper adaptor may cause fire or electrical shock!
The AC adaptor varies from country to country. If you take the product from
one country to another, please make sure your AC adaptor compliant with the
local power supply. If you are not sure about the technical information for the
power supply or the adaptor, you can consult a qualified local electrical
engineer.
2.2 Power on order
When you have this product connected to a system, please set all the volume to
minimum then follow the proper order to turn all the devices on: master MIDI device
(which sends out MIDI data), slave MIDI device (which receives MIDI data), audio
devices (mixer, amplifier, speakers). When you follow this order, all the signals (MIDI and
audio) will go properly from the beginning to the end. If you will turn off the system,
please follow the reverse order (turn off the audio devices first, then the MIDI deivces).

14
3 Connections
Before you make these connections, please turn off all devices to avoid
possible damage.
Please refer to the fig. below to make connections:

15
4 Basic operation
The【SHIFT】button：
zPress and hold the【SHIFT】button then press the【OCTAVE/TRANSPOSE】
button for the transpose function.
zPress the【SHIFT】button to make it light on, the keyboard is switched to the
keyboard function mode.
【Data dial】and the【EXIT/ENTER】button：
zBy default the data dial is used to change the voice#. When you reached the
desired voice#, press【ENTER】to send the MIDI data. You can also press
【EXIT】to cancel the voice# change.
zIn the keyboard function mode, you can also use【Data dial】and【EXIT/ENTER】
to change the parameters.
The【LAYER】button：

16
Use this button to swich to the function layers for knobs, faders and buttons. There
are three layers for knobs, faders and buttons, and you can see the current layer from the
right layer indicators: both indicator A and B off – the default layer; only indicator A on –
layer A; only indicator B on – layer B.

17
5 Turning on
5.1 Normally turning on
Set the power switch on the rear panel to ON to turn on this product.
5.2 Driver installation
After you connect this product to your computer via USB and turn the product on,
the computer will find it device and install the driver automatically.
You can plug and play this product on WINDOWS XP or Mac OSX.
When the driver installation is finished, this product will be recognized as
the ”USB Audio Device”.
The MIDI driver offers 2 USB INs and 2 USB OUTs.
Sometimes you may need to restart your computer during the driver
installation. Please follow the on-screen instructions.
5.3 Turning on with initilizaing
If you press and hold both 【OCTAVE-】and【OCTAVE+】buttons while turning
on this product, it will enter the initialization process and return to the normal
mode after the initializing is finished.
The initializing operation will clear all the user settings, please be careful !

18
6 Basic functions
6.1 Quickly selecting a voice
zRotate the data dial to find the voice# them press the【ENTER】button the send the
MIDI data, or press the【EXIT】button to cancel the operation.
This operation will send the program change message to select the voice.
Voice# range in some sound module is 0-127 instead of 1-128 in this product.
6.2 Transpose and octave
zOctave shift
You can shift the keyboard pitch in octaves by using the Octave function.
When the octave is shifted, the related button indicator will be on.
The octave shift range is -03～00～03. Press the two octave buttons at the
same time will set the octave shift to 00, and the indicator will be off.
zTranspose
You can shift the keyboard pitch in semi-notes by using the Transpose function.
When the transpose value is changed, the related button indicator will flash
slowly.
The transpose range is -12～00～12 semi-notes. Press the two transpose
buttons at the same time will set the transpose to 00, and the indicator will be
off.
When both octave and transpose values are changed, the related buttons will
flash quickly.
zThe default keyboard ranges of UF 50/60/70/80 are listed below:
The Pitch and key#(note#) list：
OCTAVE# C C# D D# E F F# G G# A A# B
-1 0 1 2 3 4 5 6 7 8 9 10 11
0 12 13 14 15 16 17 18 19 20 21 22 23
1 24 25 26 27 28 29 30 31 32 33 34 35
2 36 37 38 39 40 41 42 43 44 45 46 47
3 48 49 50 51 52 53 54 55 56 57 58 59

19
4 60 61 62 63 64 65 66 67 68 69 70 71
5 72 73 74 75 76 77 78 79 80 81 82 83
6 84 85 86 87 88 89 90 91 92 93 94 95
7 96 97 98 99 100 101 102 103 104 105 106 107
8 108 109 110 111 112 113 114 115 116 117 118 119
9 120 121 122 123 124 125 126 127
6.3 Using knobs and faders
zWhen you adjust a knob or a fader, it will send specific MIDI data to change related
parameter.
zWhen you adjust a knob or a fader, you will see related information on the DISPLAY.
zPlease refer to the appendix <Intial status> for more information.
You can customize the MIDI data to be sent using the【ASSIGN】function (8.1).
6.4 Using SEQ control buttons
zPress the SEQ control buttons to send specific MIDI data.
zPlease refer to the appendix <Intial status> for more information.
You can customize the MIDI data to be sent using the【ASSIGN】function (8.1).
6.5 Using function shortcut buttons
zPress the function shortcut button F1～F6 to send specific MIDI data.
zPlease refer to the appendix <Intial status> for more information.
You can customize the MIDI data to be sent using the 【ASSIGN】function
(8.1-8.3).
6.6 Pitch wheel and modulation wheel
zUse the pitch wheel to send the pitch bend data by default, and the pitch bend range
is up one semi-note and down one semi-note.
zUse the modulation wheel to send the modulation data.
You can customize the MIDI data to be sent using the【ASSIGN】function (8.1).
6.7 Pedal
zFor the two pedal jacks, each one can be used for continuouls pedal (e.g volume
pedal) or switch pedal (e.g sustain pedal).
zBy default, PEDAL A is for sustain pedal and send CC#64 message, the data value
is either 0 or 127(switch data); PEDAL B is for volume pedal and send CC#11

20
message, the data range is 0-127(continuous data).
zTo change pedal type or polarity, please use the system settings function (9.3-9.6).
You can customize the MIDI data to be sent using the【ASSIGN】function (8.1).
6.8 Breath controller
zUse the breath control jack for a breath controller such as YAMAHA BC3 and send
out the MIDI data.
You can customize the MIDI data to be sent using the【ASSIGN】function (8.1).
By turning the gain and fine tune knobs in the breath controller, get a good
breath feeling and data range.
6.9 Aftertouch
zAfter pressing a key, you can continue applying force to send channel after touch
data.
zYou can adjust the data sending rate or turn off those MIDI data (9.2).
zPlease refer to the appendix <After touch curve list>.
You can customize the MIDI data to be sent using the【ASSIGN】function (8.1).
6.10 Bank seleting and program change (PATCH)
6.10.1 Bank MSB Select
zOperation：【SHIFT】ÖC1【Bank MSB Select】Ö【Set value】Ö【ENTER】
zMIDI message sent：CC#0 + CC#32 + Program
zDefault value：0
zValue range：0-127
6.10.2 Bank LSB Select
zOperation：【SHIFT】ÖC#1【Bank LSB Select】Ö【Set value】Ö【ENTER】
zMIDI message sent：CC#0 + CC#32 + Program
zDefault value：0
zValue range：0-127