Côr HA-6400 User manual

1
HA−6400
CôrtHome Automation System
Homeowner’s User Guide

2
CONTENTS
1. WELCOME 3.......................................................................
2. INTRODUCTION 3..................................................................
2a. Features 3........................................................................
2b. Benefits 3........................................................................
Front of Côr Panel 4...................................................................
Back of Côr Panel 5...................................................................
3. GETTING STARTED 6...............................................................
Important Information from your Installer!! 6...............................................
Setting up your Home/Site on your Côr App 6..............................................
Changing User Name and Password 7.....................................................
Adding more Users 9..................................................................
Adding another Site 10................................................................
Setting up Notifications 11..............................................................
Enabling Location Services 12...........................................................
Including your compatible Thermostat 13..................................................
Changing the Background of the App 14...................................................
4. NAVIGATING THE APP 15...........................................................
Settings 18..........................................................................
Sensors 19..........................................................................
Area Name and Entry Exit Times 20......................................................
System Name and Clock 21.............................................................
Reporting and Notifications 22..........................................................
Network 23..........................................................................
Automations 24......................................................................
Schedules 25........................................................................
Holidays 25.........................................................................
Adding Z−Wave Devices 26............................................................
Wi FiSetup 28......................................................................
Cameras 29..........................................................................
Connection Status 29..................................................................
Details 30...........................................................................
5. ADDITIONAL REFERENCE 31.......................................................
About navigating this electronic document:
Throughout this document there are navigational links.
Wherever you see underlined blue text you can click on it to navigate to that reference.
Whenever you navigate to a new page, you can go back using Alt + (left arrow)

3
1. WELCOME
Congratulations on your purchase of the Côr Home Automation System! Carrier/Bryant, Interlogix and Kidde have combined their expertise
to bring you a simple, yet powerful system to monitor and control your home from wherever you are using a smartphone or tablet.
2. INTRODUCTION
The Côr Home Automation system is a professionally installed offering consisting of a hub/panel, wireless add−on components for sensing
and control and a free homeowner Smart Home app for controlling and monitoring the system after installation. For the latest product
information at any time, contact your local Authorized Côr Home Automation dealer or visit us online at
www.CôrHomeAutomation.com.
2a. Features
256 Users
64 sensors + 20 Keyfobs
250 Z−WaveDevices
4 Areas/Partitions −split your system into smaller parts you can protect individually
85db siren
24 hour battery backup
Wi Fi802.11 b/g
IEEE 802.3 compliant Ethernet
3G Cellular Radio Module (optional for professional alarm monitoring)
UL Listed
2b. Benefits
Future proof, professional grade system from experts in the field
Professional installation (no−hassle experience)
Integrated home automation (be confident that all components of the system work in tandem)
Add and remove users easily
Monitor and control your home from anywhere with an internet connection
Get notifications about activity on your system
Create automations to make your daily routine more convenient and safe
Seamless professional monitoring support when you need it (for a fee)
Thermostat and Wall Control integration
For more information on the product including Add−On components, please visit:
www.CôrHomeAutomation.com.
On the website, you can also access many helpful instructional video about navigating through the Côr Smart Home app in the Support
section.

4
FRONT OF CÔRPANEL

5
BACK OF CÔRPANEL

6
3. GETTING STARTED
Important Information from your Installer!!
Please be sure to get the below information from your installer after installation of your system. Store this information safely. The panel
serial number is a 12 digit number that can also be found on the back of the panel.
Install App: Search for Côr Home Automation and install the free Côr App from App Store or Google Play on your mobile device.
Setting up your Home/Site on your Côr Smart Home App:

7
Changing User Name and Password
Change your username and password after 1st login by following the following steps.

8

9
Adding more Users
Use this feature to add family members; to provide temporary access to guests and controlled access to domestic help or service providers.
1. Click on + Add User
2. Change the First Name (Last Name optional) and PIN
3. Select the User Type and click Back after making selection
4. Hit Done when finished
NOTE: You can also change the Language options and Permission Dates for the User by clicking on those options.
Once you have created the User credentials, follow the steps for “Setting up your Home/Site on your Côr Smart Home App” section on page
6.

10
Adding another Site:
Use this feature when you have to monitor a vacation home or the home of a loved one you are helping take care of with using the following
steps.
NOTE: Each new Site represents a different panel and you can have multiple panels under one Côr Smart Home app.

11
Setting up Notifications
Set up notifications to be informed about alarm events, low battery levels, power loss or events occurring in the house. Follow the steps
below to set up and customize the notifications that you receive.
Notification Category Event Reported
Alarms
Alarms
Alarm Restores
Sensor Lost
Sensor Trouble and Restore
Sensor Tamper and Restore
Arm and Disarm
Arm−Disarm
Cancel Code
Recent Arm−Exit Error
Power
Sensor Low Battery
AC Failure Reporting
Low Battery
Video Video Events
System
Bypass and Un−Bypass
Tampers
Reporting Trouble
Log Full Report
Auto Test
Start−End Programming
Start−End Download
System Troubles
Access Events
To receive notifications by email or text go to Reporting and Notifications under Settings and enter your email address or respective phone
number under Destination.

12
Enabling Location Services
Enabling Location Services enables the user to get a status of the home when they leave a perimeter outside the home. It also enables the user
to use location to activate automations like switching on lights, locking doors etc.

13
Including your compatible Wi−FirThermostat or Infinityr/EvolutionrWall Control
Follow the steps below to use one app to make adjustments to your thermostat or Infinity/Evolution Wall Control from wherever you are.

14
Changing the Background of the App
The Côr App has a default background screen but you can select other backgrounds based on your preference. There are several options from
the library or you can upload your own photos.

15
4. NAVIGATING THE APP
The first screen that will appear once you connect is the Overview screen. This will display the status of your system and allows you to arm
or disarm areas by pressing Arm Away, Arm Stay, or Disarm. From this screen, you can also enable Automations that have been
programmed in the Côr app.
The menu bar is located along the bottom of the screen.
Press the Lights icon to access Z−Wave enabled modules and outlets that are connected to the Côr Home Automation system for lighting
and on/off appliances. Please see Section 4.10 for Programming Z−Wave Devices. From this screen, you are able to dim or turn on/off light
switches; and turn on/off power to plugged−in appliances or products. In addition, you can use the Automation feature to program your Côr
Home Automation system to turn on these Z−Wave enabled modules and outlets at a certain time; or set up lights to turn on and off to mimic
occupancy while you are away from your home.

16
Press the thermometer icon at the bottom of the menu bar to control your thermostats that are connected to your Côr Home Automation
system. Using the red and blue arrow to the right of the screen, you can adjust your desired temperature setting to maintain comfort in your
home. This screen also allows you to change the operational mode of your heating and air conditioning system by selecting either Heat,
Cool, Auto or Off. In addition, you can control the fan operation either to run constantly On or in the Auto mode.
Press camera icon at the bottom of the menu bar to access the Wi−Fi cameras connected to the Côr Home Automation system. Pressing
the Play icon in the center picture of the video will allow you to view live video streams from the camera. If you want to record the live video
then press the Record button to start recording. You can also view previously recorded clips by pressing the Play icon under
Latest Clip section of the screen.

17
Press the Lock icon at the bottom of the menu bar to access Z−Wave enabled open and close devices such as Door Locks and Garage
Door Openers. On this screen, you can check the status of a Z−Wave enabled door lock or garage door; and remotely lock the door or close
the garage door.

18
Press Sensors icon to view sensor status. From the Sensors screen you can press Bypass to ignore a sensor or press it again to
restore it to normal operation. You may also turn on or off the Chime feature. If you would like to be notified when a specific sensor is
triggered then press the sensor Notification icon to turn on or off.
Settings
To access the Settings menu, press the Main Menu icon in the top left corner of the screen on the Côr app once signed into the system
Site.

19
Sensors
The Sensors setting is the first default item on the drop−down option under Settings Selector. From this screen, you are able to modify and
edit the Sensor Name as it is displayed on the Sensor navigation screen of the Côr app.
From this screen, you are also able to obtain the Signal Strength of each sensor in the case where you may be experiencing an interference and
want to validate the performance of the sensor to communicate back to the Côr panel.
Remember to Save your changes when you are finished programming the Sensors settings.

20
Area Name and Entry Exit Times
Select Areas Name and Entry Exit Times from the drop down menu. With the Areas screen selected you can choose an Area number to
configure, give the area a name, and define attributes for that area.
The Côr system can support a total of 4 areas; each area is configured with its entry and exit times, area options, area timers, area type and
reporting characteristics.
Entry Time 1
Entry time 1 is used to time the entry delay when an entry delay is started by an entry 1 sensor type.
Exit Time 1
Whenever an area is turned on, it will start an Exit 1 timer. Entry 1, Entry 2, and Handover sensor types will not create an alarm if triggered
while an Exit 1 timer is running.
Entry Time 2
Entry time 2 is used to time the entry delay when an entry delay is started by an entry 2 sensor type.
Exit Time 2
When the Exit 1 timer expires it will start the Exit 2 timer. Entry 2 sensors will not create an alarm if triggered while an Exit 2 timer or an Exit
1 timer is running.
Stay Entry Time
The stay entry time is the entry warning time that applies to all sensors armed in the stay mode. Entry 2 sensors will follow Entry 2 time and
will ignore this setting. This stay entry time does not apply to fire sensor types.
Remember to Save your changes when you are finished programming the Areas Name and Entry Exit Times settings.