Cabinet Mania Base Cabinet User manual

1
Base Cabinet
More assembly info available at:
www.cabinetgiant.com/assembly
®
Assembly Guide
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos

2
Hey there! Assembling our cabinets is really simple, but in case you’re a little nervous,
this guide should help. Simply follow this quick guide and you’ll be a cabinet assembly
master in no time. It’s painless, promise!
Step 1 | Unpack & Organize
Unlike many other ready‐to‐assemble (RTA) cabinets on the market, ours require NO hot glue guns,
NO staple guns, NO bar clamps, or anything more sophisticated than a Phillips screwdriver and
rubber mallet.NO KIDDING!
To speed up the assembly process, it can help to use an electric screwdriver.It also helps if two
people work together on very large cabinets – one holding the cabinet parts in place, while the
other tightens the screws.
Even if you hire your own installer, you’ve saved thousands by eliminating the middleman fees
charged by cabinet companies that maintain expensive showrooms.
Cabinet Giant’s maple, oak, bamboo and birch cabinets are shipped to customers with the hinges
already secured to the doorframe faces, making your life easier.Our factory also pre‐drills and
attaches all the cam-locks before shipping the cabinets to you.Doing this saves you a lot of time
and makes assembling both easier and more intuitive.
All hardware, mounting brackets, shelves, drawer pulls and screws are provided.A few extra screws
are included as well.Dovetailed drawers that are not pre‐assembled can be tapped together with a
rubber mallet.
As with anything new you do, there’s a learning curve.Handy and experienced do‐it‐yourselfers, as
well as total novices are usually able to assemble each of our other RTA cabinets within 10‐15 min-
utes.Ready‐to‐Assemble cabinets that may take a little longer to assemble include drawer base
cabinets, bathroom vanities and lazy susans.
Let’s get to it!
Place your RTA cabinet panels on a smooth, scratch resistant surface in a large,
open area.Some people like to work on a carpeted area; others prefer to elevate
the cabinet by placing it on a table top. If you are not using a carpeted area, use
the foam sheets and box the cabinet came in to help protect the cabinet from
being scratched during assembly.
Next, we’ll identify which cool fastening system your cabinets use and learn how it
works.
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
2-4 mins
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos

Step 2 | Identify Fastening System
3
We use several dierent fastening systems. They are all great, but they attach
dierently, so let’s gure out what you have and how it works. For the rest of the
instructions, we’ll use the terms ‘Steel Spring Clips’, or ‘Plastic Cams’ to reference
the fastening systems. They’re all over the cabinet, so spotting them is easy.
OR
Steel Spring Clips Plastic Cams
x x



x
x




Pop clip into place
& lock in place using most
plentiful round head screws
in hardware bag
Seat female cam into
place on top of male cam,
then turn metal claw mechanism
180 degrees clockwise with at head
screwdriver to lock into place

X

Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
1 mins
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos



4
Step 3 | Attach Sides To Front
Set front of cabinet, face down on your padded work surface.
Line up fasteners on the side of the cabinet with fasteners on the front of the cabi-
net, locking the fasteners in place. Repeat with other side of the cabinet.
Front Side
Side
= fastener
= fastener 
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
3-5 mins
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos

Dado





We’re getting close...
5
Step 4 | Slide in Floor
Slide the bottom oor of the cabinet into place using the dado joints (shallow
grooves cut out of the sides of the cabinet) as a guide. The oor of the cabinet
should be easy to identify because it is usually only nished on one side and
should be just a little thinner than the dado joints (remember the prior sentence?)
on the side of the cabinet towards the bottom.
Step 5 | Back It Up
Line the back of the cabinet up with the fasteners on the sides of the cabinet,
setting them in place. Lock the back to the sides using the fasteners.
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
1 min
2 mins

Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos






6
Step 6 | Toe Kick
Pop the toe kick into place and use the fasteners to lock it into place.
Step 7 | Shelving
From the hardware bag, put the clear acrylic shelf clips into place. Pop the shelf
into position.
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
1 min
1 min
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos



You’re doing a great job!
Step 8 | Drawer Glides
X

7
We use several dierent types of glides, but for this assembly guide we’re covering our most popular
soft-close glide. The process is extremely easy. Locate the plastic L-shaped “boot”and place it into the
corresponding holes in the back of the cabinet. You can use the supplied optional screws to x it in place,
but it’s not necessary.
Next, take the metal glide and slide it into the plastic “boot”you just attached to the back of the
cabinet. Line the front of the glide so it’s ush with the front of the frame (and pre-drilled hole in
frame), using a small supplied 7/16”athead screws to hold everyting in place. Repeat on other
side of cabinet. Note: Save the orange & blue clips for a later step. They mount to the drawer
box.
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
1-2 mins
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos

8
Step 9 | Put on your drawers
Tap with rubber
mallet on joints


Tap with rubber
mallet on joints


2 Screws


There are ve pieces that make up the drawer. If your drawers don’t have dovetail joints, then simply line
up the pieces as shown below and use supplied 1¼”screws and the pre-drilled holes to fasten all the
parts together. If your drawers use dovetail joints, then good news, no screws necessary! Line up all the
parts, hanging the front of the drawer over a padded counter-like surface. Take a rubber mallet and
gently coax the dovetail joints together until ush. Note: You can apply wood glue to the joints at this
step, but normally the joints are tight enough that it’s not necessary.
Now, you’re going to use those fancy orange & blue clips we saved from earlier. Simply line them up as
shown and use the stainless steel screws that came packaged with the clips to fasten them to the bottom
front area of the drawer box.
Side
Side
Back
Drawer Front
Drawer Floor
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
3 min
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos



Click!
9
Step 5 | Click It
Place the assembled drawer box on top of the extended metal glides. Towards the
back of the metal glide, you’ll notice there’s a prong. Push the prong into the pre-
drilled hole located in the rear of the drawer until it’s ush with the back of the
cabinet. You’ll hear a few “clicks”that will let you know the drawer is locked into
place.
Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
1 min
Underside of drawer
Underside of drawer
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos

10 Questions?
More assembly info available at:
www.cabinetgiant.com/assembly
or drop us an email at:
[e-mail]
1 min 2 mins
Take the two exible plywood “beams”, and pop
them into the dado joints in the front and back of
the cabinet, then slide it into the dado groove
running along the side of the cabinet.
Lucky you, these are easy to deal with! Use the
eight round-head 1/2”screws to fasten the brace
to the cabinet as shown.
Place corner braces as shown in diagram, making
sure they are ush with the top of the I-Beam.
Fasten the I-Beam to the corner brace using a 1”
screw. Then, use two 1”screws to anchor the
diagonal corner braces to the cabinet box.
Drawer
front
side
Overhead view
front
side
Overhead v iew
Overhead view
X
X


Step 6 | Bracing
Okay, last step. Take a look at what’s leftover, and once you’ve established what
kind of vertical brace came with your cabinets, screw them on, and you’re done!
OR
Wood I-Beam Vinyl Corner Brace

You did it!!!
I-Beam
I-Beam
X
X


2 min
Need Help?
Give Us A Call at 1-888-551-4480 ext 2
Or You Can Watch The Assembly Videos Here
http://www.worldcraftcabinetry.com/videos