Cable-Tronix CT-LCD-404A Operating and maintenance instructions

INSTALLATION MANUAL
CT-LCD-404A
Ceiling Mount for 10” to 30” LCD Television
1

PACKAGE CONTENTS
This package contains:
One CT-LCD-404A Wall Mount
Installation accessories
Installation Manual
PRODUCT DESCRIPTION
The CT-LCD-404A is a ceiling mount designed to support 10” to 30” LCD televisions with a
maximum weight of 44 lbs. The LCD-404A is made of steel and comes in three finishes:
CT-LCD-404A-B (black), CT-LCD-404A-S (sliver), and CT-LCD-404A-W (white). The unit swivels
left and right up to 190 degrees, and can be tilted up or down up to 20 degrees. Mast extends from
19.7” to 33.5”. VESA® standard 50mm/75mm/100mm/200mm/200mmx100mmLCD monitors and
televisions are supported.
SPECIFICATIONS
The diagram below represents dimensions and articulating range of the CT-LCD-404A.
A
B
C
D
E
A: 3.5” (90mm)
B: 8.5” (215mm)
C: 19.7” – 33.5” (500 -850mm)
D: 8.6” (220mm)
E: 5.1” (130mm)
2

INSTALLATION
NOTE TO INSTALLER
Warning: The installer of this product must verify that
the mounting surface will safely support the combined
weight of all attached equipment and hardware. This
product must be mounted on wall studs or concrete
for a secure, stable, and reliable mounting. North
A
merican Cable Equipment, Inc. will not be held liable
for the improper use or installation of this product.
1. UNPACKING and HANDLING
Each unit is shipped with all necessary mounting hardware.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the product for shipping damage. Make sure the equipment is clean and damage free.
If equipment appears to be damaged or defective please contact us at 1-610-429-1511 for
assistance.
3. INSTALLATION
a. Predetermine the best possible viewing location for the monitor.
b. Attach the LCD ceiling mount to a joist or beam in the ceiling with the appropriate
hardware. The ceiling mount MUST be attached to a joist or beam. Lag screws have
been included for wood stud installation.
c. Multiple VESA® patterns can be supported by aligning the LCD monitor/TV with the
correct holes on the wall plate. Attach theLCD monitor/TV with the screws appropriate
for you unit.
d. Wrap loose cords using cable ties. However, be sure to provide sufficient slack for the
full movement of the monitor/TV.
e. For assistance contact Cabletronix sales engineers at 1-610-429-1511.
3