CaddyTalk minimiNR User manual

www.caddytalkusa.com
MANUAL

Power and Measurement Button
Setup Mode Button
Laser Receiving Department
LED BAR
(Slope function on/off
Charge status indicator)
Laser Transmitting Part
Six-Fold Lens
Focus Ring
Viewfinder
Battery Cover/
Battery Charge
Terminal
Magic Slope Aim Reticle
Active Laser
Meter/Yard Display
Slope Correction
Distance
Straight Distance
to the Target
Environmental
Slope
Show Remaining
Battery Power
VIEWFINDER SCREEN SETTINGS
DETAIL NAME

POWER & DISTANCE MEASUREMENT
Press the power button once to turn it on and aim at the target. Press the power
button once more to complete the measurement and display the distance.
Enable Display.
Display of recommendations
calculated by using slope
and environmental factors.
Hold the button to achieve the
straight distance to the target.
When the power button is
pressed, the reticle appears
and the measurement starts.
12
3 4
※Automatic power off occurs when the button is not pressed for 10 seconds

MAGIC SLOPE
Considering the altitude (high & low) of the target point, this function shows
the best recommendation.
The Magic Slope is developed directly in the golf zone by applying the concept of
ballistics. CaddyTalk’s Magic Slope provides higher accuracy of recommended
distances compared to existing rangefinders. See the differences in ballistics
between CaddyTalk and other generic products.
Example: for uphill gradient 5.2 degrees
Magic Slope Correction Distance
Actual Straight Distance

E-SLOPE with temperature and humidity
environment variables
Integrating the patented technology of the Magic Slope Function, E-Slope
calculates the environmental factors (temperature, altitude, humidity) of the
golf course to the deliver the most accurate measurement.
High-level golf courses require adjustment of the target
distance due to lower air pressure than low-lying
golf courses
Example
If the measured distance to the pin is the same as 138 yd
For 656 ft above sea level
golf course, the E-Slope
recommended distance is 137 yd.
For golf courses 3,608 ft
above sea level, the E-Slope
recommended distance is 132 yd.

PIN FINDER
JOLT
Hold down the measurement button while you scan the viewfinder left and right.
Only the distance to the nearest target of the scanned point is displayed.
When the correct distance is displayed after pressing the measurement button,
the completion of measurement will be notified through vibration alert.
※It does not work with low battery level.

SET-UP MODE
MEASUREMENT UNIT SETTING
Press the button in front of the power button for 1 second to enter Setup
mode. Use Setup mode to change M/Yd, select the function of the slope, and
select to see the temperature, altitude, and humidity of the golf course.
Press the mode button for 2 seconds to enter the mode which allows you to
set the unit of measurement. Press the power button to change
the units M/Yd.
M
M
M
※ Change Mode to Button, You can change the selection by using the power button.
Setup mode configuration
M
Select a unit of measure
Meter
Yard
E-Slope
M-Slope
Non-Slope (Pro)
Select Slope Mode

SLOPE ON/OFF SWITCHING
After entering Setup mode, briefly press the button to select the slope
function. You can select the power button to use the E-Slope →
M-Slope → Non-Slope.
M
e Slope Magic Slope Non Slope
Green Color- Slope On Red Color – Slope off

BATTERY REMAINING INDICATION/CHARGE
Low Battery Mark will appear if the remaining battery level is less than 20%.
At this level, the JOLT function will not operate.
Open the battery cover from the main body and charge it with
the USB-C cable provided (charging time 180 minutes).
Low Battery Mark
State of charge LED
Charging (Red) Charging complete(Green)

SPECIFICATION
Product
Type
Range
Distance unit input
Magnification
Product Features
Dimensions
Weight
Battery type
Color
Package Includes
Manufacturer/Manufactured in
Regulations for
Quality Assurance
Support
CADDYTALK MINIMI NR
For measuring golf distance
10~1,000M
M/Yd
6X
E-slope
92 x 58 x 31mm
132g
700mAh rechargeable internal battery
Pure White / Rich Black
Minimi NR, USB Cable , User Guide,
Cleaner, Case
RNDUS Co., Ltd. / Made in China / Design & Patent by Korea
Product damage compensation is based on the
consumer dispute settlement criteria under the
Consumer Basic Law
[email protected]

PRECAUTIONS
1Avoid touching the lens with your hands to protect it from foreign substances.
2Do not disassemble or repair the product arbitrarily.
3Wipe out the lens and viewfinder with a soft, clean cloth when foreign
substances are present.
4Avoid moist or wet places and and store at a well-ventilated room
temperature location.
5Avoid direct sunlight on the lens and viewfinder. This can cause
equipment failure.
6Do not stare directly at the laser beam.
7Use with care according to your purpose.
When charging the product, it is recommended to connect to the 'PC USB port'
or normal 'Charging adapter (lower than 5V, 2V)
Overvoltage and overheating can cause damage to the product when using
high speed chargers (over 5V, 2A) - i.e. charging adapters for tablets, vehicles,
and high-speed smartphones, etc. 9V, 12V.