Cadenceberge CAD-HV-HCA12 User manual

U S E R M A N U A L
4K HDMI to USB3.0 Capture
Model :CAD-HV-HCA12

Enjoy the vivid world!
INTRODUCTION
1.Introduction
4K HDMI to USB3.0 Video Capture Dongle,it is easy to carry,have a superior performance,superior
compatibility,simple installation and many other features,It can capture one HDMI 1080p60 input and output
signal; compatible with Windows,Linux,Macos X and USB3.0 interface,Compatible with many USB3. 0 chipset
(Intel,Renesas,ASMedia,Fresco Logic),Compatible with USB2.0 and preview, record, capture, live broadcase
through a number of free third-party software via USB3.0 interface;The HDMI video capture meets UVC and
UAC standard.
2. Features
1.It can capture one single channel HD HDMI video signals
2.The capture resolution up to 1080P/60Hz, input resolution up to 4K/30Hz, the HDMI Loop-out resolution is the
same as input resolution
3.Support Mic recording input
4.Support Line-out output
5.Support MJPE and YUY2
6.Support UAC&UVC，support 48 KHz PCM audio
7.It need to install a driver with the Windows7 system
8.It is compatible with Windows 7,Windows8,Windows8.1,Windows10 or later, Linux OS, Mac OS operating
systems.
9.USB3.0, 300~350MB / s throughput max and it is compatible with USB 2.0 (40MB/s throughput max).
10.It can automatically detect the input video formats and it will adjust to the set output size and frame rate
automatically.
11.It can automatically detect the input audio formats and swift it to 48KHz PCM audio.
12.Two capture can be used on one PC
13.The firmware can be updated.
14.With good picture quality, the RGB color range is 0-255, less delay.
15.Support for all thrid-party player software compatible with UVC and UAC protocols.

3. Specification
Connection:
Input interface
1 HDMI interface, 1 Mic input, 1 Micro USB power input
Output interface
USB3.0, 300-350MB/s throughput MAX
HDMI Loop-out
Line-out output
HDMI input
4K/30Hz,1080P/60, 59.94, 50, 30, 29.97, 25, 24, 23.98, 1080i
50/60, 720P 50/60, 480P, 576P,1280x1024, 1280x960,
1024x768, 800x600, 640x480
HDMI audio input
1 LPCM audio signal
Standards:
HDMI input formats
It meets the HDMI 1.4 standard, and supports 225 MHZ 4K/30Hz
12bit deep color
Output Formats
Resolutions: 640x480/720x480/720x576/800x600/1024x768/
1280x720/1280x960/1280x1024/1366x768/1360x768/1440x900/
1400x900/1680x1050/1920x1080
frame rate: 25/29.97/30/50/59.94/60 fps
Video Sampling Rate
HDMI: 165MHz
Audio and video capture
It meets the standards of UVC (USB video class) and UAC(USB
audio class)
Output color space
YUV, RGB
Video Process
Color space switch
Hardware Color Space Switch
Image Scale
Hardware scale
Others
The support of OS
Windows 7,Windows8,Windows8.1,Windows10 or later, Linux
OS, Mac OS
Software compatibility
Adobe Flash Media Live Encoder (Windows, OS X)
Real Producer Plus (Windows)
VLC (Windows, OS X, Linux)
QuickTime Broadcaster (OS X)
QuickTime Player (OS X)and etc.
OBS
PotPlayer
Upgrade
The firmware can be upgraded
Size
113X61X13mm
Power consumption
<= 2.5W
Working Temperature
0-70 deg C
Storage Temperature
-20-120 deg C
Storage Humidity
5%-90%

4. Interface:
1.Signal Indicator:This LED illuminates when the device capture the video normally.
2.Power Indicator:This LED illuminates when the device is connected to computer USB port.
3.USB3.0 Output:This slot is where you connect to the USB3.0 input of the computer or NoteBook.
4.HDMI Output: Connect to HDMI display device.
5.Line Out: Connect to headphone or louder speaker
6. Mic: Connect to Micphone
7. HDMI Input: This slot is where you connect the HDMI source output from Camera, Vidicon, Game box,
IPTV box,and so on.
8. Power: Connect the power supply when the power supply is insufficient (For example, use the mobile
phone for live streaming)
5.Package
1. HDMI to USB3.0 video capture----------------------------------- 1 unit
2. USB3.0 cable --------------------------------------------------------- 1 unit
3. USB power cable -----------------------------------------------------1 unit (Optional)
4. User manual----------------------------------------------------------- 1 unit
5. USB to Type-C connector ------------------------------------------1 unit (Optional)
6. USB to Micro USB connector--------------------------------------1 unit (Optional)
6.Computer system requirements:
Windows® 10 / Windows 8.1 / Windows 7 (SP1)
PC: Intel® Core™ i5-4440 3.10 GHz + NVIDIA® GeForce® GTX 660or above
Notebook: Intel Core i7-4810MQ + NVIDIA GeForce GTX 870M or above
4 GB RAM (suggest 8 GB)
Mobile phone requirements:
Android phone (Most phones are supported)
Only USB2,no USB3.(android UVC driver not support USB3)
If it’s an Android phone with USB, then need pure USB2cable force into his mode to use.
The list of restrictions on USB host cannot be supported and used:

Limitation
Host
platform
remark
HEC200
Win10 YUY2 OK
Win10：USB3 MJ may flicker
Win7: USB YUY2 720P60 FPS=0,change resolution
error message,reopen ok
VIA805
need VIA driver
win10 inbox drive, audio sample rate=48K,no sound
Fresco FL1100
need Fresco driver
ASMedia 1143
PID:1343
Asus PRIME X370 PRO
AMD CPU
1080P60 YUY2 when first play will be OK，any more
action will "Not enough USB controller resource"(host
driver issue)
ASMedia 1343E
?
need windows inbox driver
ASMedia 1042AE
PID:1242
Z97 on board
need windows inbox driver
ASMedia
1142(3.0)
PID:1142
X99 on board
need windows inbox driver
Asmedia
1142(3.1)
PID:1242
Z97
PID:1242, inbox drive
1080P60 when first play will be OK，any more action will
"Not enough USB controller resource"(host driver issue)
Not support
Host
platform
remark
EJ168 old version
VID:IE4E
PID:7023
ISOC mode BW issue
Fresco FL1000
VID:1B73
PID:1000
ISOC mode BW issue,only 1080P30
VIA800
VID:1106
PID:3432
ISOC mode BW issue,1080P60MJ and YUY2 frame rate
<10
VIA801
ISOC mode BW issue,1080P60MJ and YUY2 frame rate
<10
ASMedia
1042(0.96)
VID:1B21
PID:1042
Z77 on board
ISOC mode BW issue, YUY2(x), MJ(O)