Calibre 12ID User manual

PremierView12ID
Calibre specialises in high performance LCD display solutions for industrial, OEM, military
and aerospace applications. PremierView monitors feature flexible signal capability,
excellent motion reproduction and accurate, artifact free image re-sizing.
Calibre's PremierView12ID is a very high performance TFT-LCD display. Based around
Calibre's proprietary PremierView4 LCD driver technology, it is able to connect directly to a
very wide range of video or computer image sources and display images full screen on its
12.1" viewable diagonal, wide viewing angle screen.
PremierView4 is one of the most flexible LCD systems on the market able to accept a wide
range of input resolutions. PremierView4 features true autoscanning real-time software
algorithms to allow it to be adjusted to suit most non-standard resolutions and signal timings
within its resolution, line and field rate ranges. Specific compatibility with non-standard signal
timings and custom resolutions can also be provided as a customer specific option.
PremierView12ID uses an 800x600 TFT LCD panel for display of real-time Video or computer
VGA-XGA full screen, full-motion in real time. Through the standard VGA connector,
composite sync and sync on green from high resolution sources such as workstations are
also supported. A DVI digital graphics input is available as an optional extra.
A professional grade video decoder is available as an option which gives outstanding
composite and YC video performance through the use of a 4-line comb filter and vertical
noise reduction algorithm. This option also adds a selectable RGB/YUV component video
input. SDI serial digital video with PAL or NTSC timings is also available as an additional
option. A lower cost standard grade video decoder is also available for less demanding
applications.
High performance scaling algorithms work without compromising image quality or resolution
irrespective of the signal resolution implemented. It is compatible with Composite and Y/C
(SVHS, S-video) inputs with automatic detection of PAL, NTSC & SECAM video, and/or most
computer RGB signals from 640x350 up to 1024x768. Very flexible wide-ranging picture
controls are provided via an on-screen menu. These controls include picture size/position
controls as well as contrast, brightness, and colour/hue for video.
PremierView12ID is available with two LCD panel options, either a very high brightness
Toshiba 12.1" 18-bit per pixel panel or a high brightness NEC 12.1" 18-bit per pixel panel.
Both feature wide viewing angles and very bright images. All image scaling is performed at
24-bit per RGB pixel data width, it is then converted to 18-bits using an adaptive high-
performance conversion algorithm. This ensures maximum colour depth and accurate grey-
scale reproduction, with no field merging, no field dropping or repetition and no pixel or line
dropping to ensure accurate motion reproduction and clean image scaling.
PremierView12ID comes as a an OEM open chassis module. Touchscreens are also
available for all models.
12.1" SVGA Multimedia LCD Monitor for Industrial
& O
EM Use

Technical Information
Panel Specification:
Viewable image size 31cm/12.1" nominal.
Panel resolution 800x600.
Colour depth -6 bits per colour, 18-bits total,
Viewing angles -
Toshiba panel deg TBA L/R, U/D,
NEC panel deg 55L/R, 40U/60D.
Panel brightness -
Toshiba panel 500cd/m2nominal,
NEC panel 350cd/m2nominal.
Panel contrast ratio -
Toshiba panel 250:1 typical,
NEC panel 350:1 typical.
Signal compatibility:
Input 1 –computer RGB via 15HDD socket.
640x350 up to 1024x768, 50-70Hz refresh, non-
interlaced. (Note: 1024x768 support is via image
downscaling to fit the 800x600 resolution panel.
There may be a slight loss of image quality in
downscale mode.)
Syncs: separate TTL/5V positive or negative,
negative combined sync TTL level, or negative sync
on green consisting of 0.3V sync and 0.7V video.
Input 2 –composite video via BNC
PAL, NTSC or SECAM, automatic standards
detection. Pro Video model has automatic enhanced-
bandwidth monochrome mode.
Input 3 –YC/S-Video via 4-pin Mini-DIN
PAL, NTSC or SECAM, automatic standards
detection.
Input 4 –Pro Video Option Only
RGB or YUV component video via 3 or 4 BNCs.
Input 5 –Pro Video with SDI Option Only
SDI Serial Digital Video via BNC.
Input 6 –DVI Option Only
DVI Digital Visual Interface, DDC2B compatible for
connection to DVI compatible graphics cards.
Touchscreen option:
Resistive touchscreen with RS232 serial controller
available to special order.
Power requirement:
12VDC at approximately 35W with NEC panel, 40W
with Toshiba panel.
An optional mains PSU is available.
Other power options available to order include
ground isolated 12VDC, 24VDC and, 28VDC with
optional industrial or military grade power filtering.
These options may be subject to MOQs.
Model numbers:
31SLCD16 xx y zz
| | |
| | |-SC = open chassis
| |
| |-N = NEC panel
| |-T = Toshiba panel
|
|-01 = VGA analogue only
|-02 = VGA analogue + DVI
|-03 = VGA analogue & Std Video
|-04 = 03 + DVI
|-05 = VGA analogue & Pro Video
|-06 = 05 + DVI
|-09 = 05 + SDI Video
|-10 = 05 + DVI + SDI Video
|-11 = Standard video only
|-13 = Professional video only
|-14 = Pro Video + SDI
Dimensions and Weights:
Open chassis models
Size TBA mm
Unit weight approx 1.5Kg, Shipping weight TBA
Calibre UK Ltd
Cornwall House,
Cornwall Terrace,
Bradford, West Yorkshire
BD8 7JS, England
Tel [phone]
Fax [phone]
E-mail [email protected]
Web-site www.calibreuk.com
Issue 1.21 E&OE specifications subject to change without notice 10/12/07 All trademarks acknowledged.