Calibre 30W User manual

PremierView30W
Calibre specialises in high performance LCD
display solutions for broadcast, industrial,
OEM, military and aerospace applications.
PremierView monitors feature flexible signal
capability, excellent motion reproduction and
accurate, artifact free image re-sizing.
Calibre's PremierView 30” is a very high
performance highly compact and lightweight
TFT-LCD display. Based around Calibre's
proprietary PremierView4 LCD driver
technology, it is able to connect directly to a
very wide range of video or computer image
sources and display images full screen on its
30" viewable diagonal, high brightness screen.
PremierView4 is one of the most flexible LCD systems on the market able to accept a wide range of
input resolutions. PremierView4 features true autoscanning real-time software algorithms to allow it to
be adjusted to suit most non-standard resolutions and signal timings within its resolution, line and field
rate ranges. Specific compatibility with non-standard signal timings and custom resolutions can also be
provided as a customer specific option.
PremierView 30W uses a 1280x768 widescreen TFT LCD panel for display of real-time Video or
computer VGA-SXGA full screen with excellent motion reproduction. Through the standard VGA
connector, composite sync and sync on green from high resolution sources such as workstations are
also supported. A DVI digital graphics input is available as an optional extra.
A professional grade video decoder is available as an option which gives outstanding composite and
YC video performance through the use of a 4-line comb filter and vertical noise reduction algorithm.
This option also adds a selectable RGB/YUV component video input. SDI serial digital video with PAL
or NTSC timings is also available as an additional option. A lower cost standard grade video decoder is
also available for less demanding applications.
High performance scaling algorithms work without compromising image quality or resolution
irrespective of the signal resolution implemented. It is compatible with Composite and Y/C (SVHS, S-
video) inputs with automatic detection of PAL, NTSC & SECAM video, and/or most computer RGB
signals from 640x350 up to 1280x1024. Very flexible wide-ranging picture controls are provided via an
on-screen menu. These controls include picture size/position controls as well as contrast, brightness,
and colour/hue for video.
PremierView30W uses a very bright, very high contrast premium-grade widescreen TFT-LCD panel
ideal for Public Information Systems as well as industrial, broadcast and OEM use. This is a true 8-bit
per pixel panel for excellent greyscale reproduction and colour depth. It has wide viewing angles and a
high brightness of 600cd/m2. The panel used has exceptionally fast response times of 16mS nominal
which are ideal for smear-free reproduction of moving video.
PremierView30W is available as industrial grade metal cased display unit or as an OEM open chassis
module. The metal cased display unit incorporates side & rear mounting points. As an option cased
units can include an anti-scratch, anti-glare front viewing window.
30” WXGA Widescreen Multimedia TFT-
LCD Monitor

Technical Information
Panel Specification:
Viewable image size 29.53" (75cm) nominal.
Panel resolution 1280x768.
Colour depth -8 bits per colour, 24-bits total.
Viewing angles -85 deg L/R/D/U typical
Panel brightness -600cd/m2 typical.
Panel contrast ratio 600:1 typical.
Signal compatibility:
Input 1 –computer RGB via 15HDD socket.
640x350 up to 1280x1024, 50-75Hz refresh,
non-interlaced. (Note: 1280x1024 support is via
image downscaling to fit the 1280x768
resolution panel. There may be a slight loss of
image quality in downscale mode.)
Syncs: separate TTL/5V positive or negative,
negative combined sync TTL level, or negative
sync on green consisting of 0.3V sync and 0.7V
video.
Input 2 –composite video via BNC
PAL, NTSC or SECAM, automatic standards
detection. Pro Video model has automatic
enhanced-bandwidth monochrome mode.
Input 3 –YC/S-Video via 4-pin Mini-DIN
PAL, NTSC or SECAM, automatic standards
detection.
Input 4 –Pro Video Option Only
RGB or YUV component video via 3 or 4 BNCs.
Input 5 –Pro Video with SDI Option Only
SDI Serial Digital Video via BNC.
Input 6 –DVI Option Only
DVI Digital Visual Interface, DDC2B compatible
for connection to DVI compatible graphics cards.
Size and Weight -Cased Models:
720mmx466mmx113mm
13Kg approx including front window
Power requirement:
Cased model: 24VDC 160W max, includes
external 110-230VAC 50-60Hz mains PSU.
Chassis units require mains wiring to screw-
terminals on power supply by suitably qualified
electrical service personnel.
Alternative power option available to special
order:include 115V 400Hz AC aerospace grade
PSU.
Model numbers:
75WXLCD26 xx I zz
I I
| |-M3 = industrial metal case
| |-SC = open chassis
I
I-01 = VGA analogue only
I-02 = VGA analogue + DVI
I-03 = VGA analogue & Std Video
|-04 = 03 + DVI
|-05 = VGA analogue & Pro Video
|-06 = 05 + DVI
|-09 = 05 + SDI Video
|-10 = 05 + DVI + SDI Video
|-11 = Standard video only
|-13 = Professional video only
|-14 = Pro Video + SDI
Note -Front Viewing Window:
Model types -05/06/09/10/13/14 professional
grade units include anti-glare anti-scratch front
viewing window as standard.
Model types -01/02/03/04/11 low-cost units do
not have this window fitted as standard but this
can be included as a cost option at time of
order.
Calibre UK Ltd
Cornwall House,
Cornwall Terrace,
Bradford, West Yorkshire
BD8 7JS, England
Tel [phone]
Fax [phone]
E-mail [email protected]
Web-site www.calibreuk.com
Issue1.51E&OE specifications subject to change without notice 10/12/07 All trademarks acknowledged.