Cambium Networks cnMatrix EX2010-P User manual

cnMatrix Quick Start Guide
1
Thank you for choosing the cnMatrix switch, a Cambium Networks communications device. Before you
begin installing the switch, verify you have all the package contents available, and a PC with SSH client,
such as PuTTY or OpenSSH SSH Client.
Package Contents
cnMatrix Switch (8 port or 24 port)
Power Cord
Quick Start Guide
Product Overview
The cnMatrix switch come in four version to support various deployment scenarios.
Part Number
Number
of Ports
Power
over
Ethernet
Throughput
Switch
cnMatrix EX2010
8
No
20 Gbps
cnMatrix EX2010-P
8
Yes
20 Gbps
Ports will display an orange border
cnMatrix EX2028
24
No
128 Gbps
cnMatrix EX2028-P
24
Yes
128 Gbps
Ports will display an orange border
Powering Up

cnMatrix Quick Start Guide
2
Connect the power cord to the power inlet, and then plug the power cord into a wall socket.
When the switch is booting up, the illuminated Cambium Networks logo will be blinking
blue. When the switch is fully up and running, the illuminated Cambium Networks logo is
solid blue.
Default Configuration
IP address 192.168.0.1 is automatically configured on Out-Of-Band Management Port (MGMT). There is
no default IP address In Band Network Ports.
DHCP Client is enabled by default on vlan 1.
Default login information:
Username: admin
Password: admin
Configure Management PC
1
In Windows, double-click the Control Panel command. The
Control Panel window is displayed.
2
In the Control Panel window, select the View network status
and tasks
option. The
Network and Sharing Center
window
is displayed.
3
Click the Change adapter settings option. The Network
Connections window is displayed.
4
Double-click the interface. The interface Properties window
is displayed.
5
Select the Internet Protocol Version 4 (TCP/IPv4) option.
Click OK.

cnMatrix Quick Start Guide
3
6
Set The IP address of the interface to 192.168.0.10 and the
Subnet mask to 255.255.255.0
Logging in to the switch
1
Use PuTTY SSH client.
2
On the PuTTY Configuration
window, in the
Host Name
field, enter the 192.168.0.1 IP
address and in the
Port
field,
enter the 22 value.
3
Click Open. The login prompt
is displayed.

cnMatrix Quick Start Guide
4
4
In the cnMatrix login prompt
enter the default username:
admin
5
In the Password prompt enter
the default login password:
admin
Hardware Overview
Specifications
cnMatrix MODELS
EX2028-P
EX2028
EX2010-P
EX2010
MTBF (hours)
285.350.90
432.283.26
338.917.20
806.354.10
Power budget
400W
n/a
100W
n/a
Power supply
AC/Internal
AC/Internal
AC/Internal
AC/Internal
Weight
3.96 kg (8.75 lb)
2.77 kg (6.1 lb)
1.99 kg (4.375 lb)
1.6 kg (3.5375 lb)
Dimensions
44 x 4.4 x 25 cm
(17.3 x 1.75 x 9.85 in)
44 x 4.4 x 20.9 cm
(17.3 x 1.75 x 8.22 in)
21 x 4.4 x 25 cm
(8.26 x 1.75 x 9.85
in)
21 x 4.4 x 25 cm
(8.26 x 1.75 x 9.85 in)
LEDs per port
Link/Activity, PoE
Link/Activity, PoE
Link/Activity, PoE
Link/Activity, PoE
Rack mountable
Yes 1U
Yes 1U
Yes 1U
Yes 1U
Temperature ranges
-o°C to + 50°C(+32°
F to + 122°F)
-o°C to + 50°C(+32°
F to + 122°F)
-o°C to + 50°C(+32°
F to + 122°F)
-o°C to + 50°C(+32° F to +
122°F)
Operating humidity
+55° at 95% RH
+55° at 95% RH
+55° at 95% RH
+55° at 95% RH
Storage temperature
-40°C to +70°C(-
40°F to +158°F)
-40°C to +70°C(-
40°F to +158°F)
-40°C to +70°C(-
40°F to +158°F)
-40°C to +70°C(-40°F to
+158°F)
LED Color
cnMatrix Logo (Power)
LED is continuously blue –
the switch is operational.
cnMatrix Logo (Power)
LED is blinking blue – the
switch is initializing.
Ports
8 or 24 Data ports used
for traffic forwarding.
Ports with an orange
border indicate PoE+
support. (802.3at)
Management Port
Used for Managing the
switch. It provides out of
band network
connectivity for
management of the
switch.
Fiber Ports
The 8-port cnMatrix
provides two 1 Gig fiber
ports (SFP) and the 24-
port cnMatrix provides
four 1 Gig / 10 Gig fiber
ports (SFP+).
Local Console Port
RJ45 connection for
console access.

cnMatrix Quick Start Guide
5
Safety Notice
Only use attachments/accessories specified by the manufacturer.
Electrical Safety Information
This switch is designed with a power inlet with an integrated ground. A power cord from the switch
shall be connected to a power outlet with ground connection.
The equipment is designed for indoor installation and not intended to be connected to exposed
(outside) networks. Equipment intended for installation in Information Technology Equipment Rooms.
"Suitable for installation in Information Technology Rooms in accordance with Article 645 of the
National Electrical Code and NFPA 75."
There are no serviceable parts inside this equipment. Service should be provided only
by a qualified service technician.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
RoHS/WEEE Compliance
Caring for the Environment: RoHS/WEEE
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or
its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste streams. It is your responsibility
to dispose of this and other electric and electronic equipment via designated collection facilities
appointed by the government or local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human health. For more detailed information
about the disposal of your old equipment, please contact your local authorities, waste disposal service,
or the shop where you purchased the product.
To prevent loss of life or physical injury, observe the following safety guidelines. In no
event shall Cambium Networks be liable for any injury or damage caused during the
installation of the switch.

cnMatrix Quick Start Guide
6
Europe- EU Declaration of Conformity
Hereby, CAMBIUM NETWORKS, Inc. declares that the equipment type [EX2010, EX2010-P, EX2028,
EX2028-P] is in compliance with Directive 2014/30/EU. The full text of the EU declaration of conformity
is available at the following internet address: https://www.cambiumnetworks.com/
Online Resources
User Guide and Getting Started Guide: https://www.cambiumnetworks.com/products/switching/
Accessing WEB Interface: https://www.cambiumnetworks.com/files/
Support: https://www.cambiumnetworks.com/support/
Contact us: https://www.cambiumnetworks.com/support/contact-support/