Cambridge Azur 540R V2.0 AV Receiver
Front Panel Information
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18 19 20 21
Standby/On
Phones - Tuning + Mode/Store
Stereo Dolby Digita l EX
DTS ES
Pro Logic /
Neo 6
DSP
Mode
Inpu t
Mode
Video Left Right
Vide o 3 In pu ts
Vo lum e
azur 540R
AV Recei ver
DVD Vide o 1 Video 2 Video 3 Tu n e r F M / A M Tape/MD/CDR CD/Aux 6.1 Dire ct
NO. & NAME DESCRIPTION NO. & NAME DESCRIPTION
1. Standby/On The power amplifier is in standby mode,
indicated by the stand by indicator.
12. Video 3 Inputs Input for VCR, Video Camera Recorder,
etc. contains one video input and
Analog Left and Right inputs.
2. Standby Indicator 13. V olume Rotate this knob clockwise or
counterclockwise, the master volume will
be increased or decreased.
3. Phones Jack for the stereo headphones. 14. DVD When the coaxial /optical output terminal
of a DVD player is connected to the
DVD COAXIAL/OPTICAL IN terminal
of this unit (5/6 rear panel), press this
button to activate this function.
4.Tuning+/- Tuner frequency or preset stations up &
down.
15. V ideo 1 When the line output of an external
player is connected to the AV 1 terminal
of this unit (6/rear panel), or when the
digital /optical output of another player is
connected to the OPTICAL IN of this
unit (6/ rear panel), press this button to
activate this function.
5.Mode/Store Press this button once to select Auto
tuning mode; press it the second time to
select the Manual tuning mode; press it
the third time to select the Preset tuning
mode, then by pressing the Tuning +/-
button to select a preset station; pressing
and holding this button (in any of the
modes above) for 5 seconds brings up
the “MEM” icon and display the next
available preset for storing the current
frequency.
16. V ideo 2 When the line output of an external
player is connected to the AV 2 terminal
of this unit (6/rear panel), or when the
digital /optical output of another player is
connected to the OPTICAL IN of this
unit (6/ rear panel), press this button to
activate this function.
6.Stereo With the unit in the STEREO mode,
only front left and front right speakers
and Subwoofer are working.
17. V ideo 3 When you want to use Video 3 inputs,
pressing this button to activate this
function.
7.Dolby Digital EX
DTS ES
Digital Surround Mode 18. T uner FM/AM
8.Dolby
Pro Logic II
/NEO 6
Surround modes for analog sources 19. Tape/MD/CDR Press this button when operating the tape
deck.
9.DSP Mode Press this button to choose one of the
following surround modes: THEATER,
HALL, PASSTHRU, MOVIE, MUSIC
and ROOM.
Analog or digital
20. CD/Aux When the coaxial output terminal of a
CD player is connected to the CD
COAXIAL IN terminal of this unit (5/
rear panel), press this button to activate
this function.
10.Input Mode Press this button to select input modes:
ANA, OPT and COAX when using
digital in.
21. 6.1 Dir ect Press this button to select the 6.1
analogue input.
11. Remote Sensor
To listen to the radio broadcast, press this
button to activate this function, press
again to switch waveband.
3