Cameo X3 D User manual

USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
X3 D
EXHIBITION LAMP WITH DAYLIGHT LEDS
CLX3D

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /
CONTENUTO
ENGLISH
INFORMATION ON THIS USER MANUAL 6
INTENDED USE 6
DEFINITIONS AND SYMBOL EXPLANATIONS 6
SAFETY INSTRUCTIONS 7
NOTES FOR MOBILE INDOOR DEVICES 10
PACKAGING CONTENT 11
INTRODUCTION 11
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 12
OPERATION 14
INSTALLATION 20
FITTING THE DIFFUSER OR SASH LIMITER 21
OPTIONAL ACCESSORIES 21
CARE, MAINTENANCE AND REPAIR 22
DIMENSIONS (MM) 23
TECHNICAL DATA 24
MINIMUM DISTANCE TO ILLUMINATED SURFACE 25
MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 25
DISPOSAL 25
MANUFACTURER’S DECLARATIONS 26
DEUTSCH
INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 27
BESTIMMUNGSGEMÄSSER GEBRAUCH 27
BEGRIFFS- UND SYMBOLERKLÄRUNGEN 27
SICHERHEITSHINWEISE 28
HINWEISE FÜR ORTSVERÄNDERLICHE INDOOR-GERÄTE 31
LIEFERUMFANG 32
EINFÜHRUNG 32
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 33
BEDIENUNG 35
MONTAGE 41
STREUSCHEIBE BZW. FLÜGELBEGRENZER MONTIEREN 42
OPTIONALES ZUBEHÖR 42
PFLEGE, WARTUNG UND REPARATUR 43
ABMESSUNGEN (MM) 44
TECHNISCHE DATEN 45

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 46
MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 46
ENTSORGUNG 46
HERSTELLERERKLÄRUNGEN 47
FRANÇAIS
INFORMATIONS CONCERNANT CE MANUEL D’UTILISATION 48
UTILISATION CONFORME 48
EXPLICATIONS DES TERMES ET DES SYMBOLES 48
CONSIGNES DE SÉCURITÉ 49
REMARQUES CONCERNANT LES APPAREILS D’INTÉRIEUR MOBILES 52
CONTENU DE LA LIVRAISON 53
INTRODUCTION 53
CONNECTEURS, COMMANDES ET INDICATEURS/AFFICHEURS 54
UTILISATION 56
MONTAGE 62
MONTER L'ÉCRAN DIFFUSEUR OU LE COUPE-FLUX 63
ACCESSOIRES EN OPTION 63
ENTRETIEN, MAINTENANCE ET RÉPARATION 64
DIMENSIONS (MM) 65
CARACTÉRISTIQUES TECHNIQUES 66
DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 67
DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 67
MISE AU REBUT 67
ESPAÑOL
INFORMACIÓN SOBRE ESTE MANUAL DE USUARIO 69
USO ADECUADO 69
DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 69
INSTRUCCIONES DE SEGURIDAD 70
INDICACIONES PARA EQUIPOS PORTÁTILES DE INTERIOR 73
ELEMENTOS SUMINISTRADOS 74
INTRODUCCIÓN 74
CONEXIONES, CONTROLES E INDICADORES 75
USO 77
MONTAJE 83
MONTAJE DEL DIFUSOR O VISERA 84

ACCESORIOS OPCIONALES 84
CUIDADO, MANTENIMIENTO Y REPARACIÓN 85
DIMENSIONES (MM) 86
CARACTERÍSTICAS TÉCNICAS 87
DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 88
DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 88
ELIMINACIÓN 88
DECLARACIÓN DEL FABRICANTE 89
POLSKI
INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI OBSŁUGI 90
UŻYTKOWANIE ZGODNE Z PRZEZNACZENIEM 90
OBJAŚNIENIA TERMINÓW I SYMBOLI 90
ZASADY BEZPIECZEŃSTWA 91
UWAGI DOTYCZĄCE PRZENOŚNEGO SPRZĘTU DO STOSOWANIA W POMIESZCZENIACH 94
ZAKRES DOSTAWY 95
WPROWADZENIE 95
PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 96
OBSŁUGA 98
MONTAŻ 104
MONTAŻ DYFUZORA ROZPRASZAJĄCEGO LUB SKRZYDEŁ OGRANICZAJĄCYCH 105
AKCESORIA DODATKOWE 105
CZYSZCZENIE, KONSERWACJA I NAPRAWY 106
WYMIARY (MM) 107
DANE TECHNICZNE 108
MINIMALNA ODLEGŁOŚĆ OD POWIERZCHNI OŚWIETLANEJ 109
MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW 109
UTYLIZACJA 109
OŚWIADCZENIA PRODUCENTA 110
ITALIANO
INFORMAZIONI SU QUESTO MANUALE D’ISTRUZIONI 111
USO CONFORME 111
SPIEGAZIONE DI TERMINI E SIMBOLI 111
INDICAZIONI SULLA SICUREZZA 112
AVVERTENZE PER DISPOSITIVI PORTATILI PER INTERNI 115
DOTAZIONE 116

INTRODUZIONE 116
CONNESSIONI, ELEMENTI DI COMANDO E INDICATORI 117
UTILIZZO 119
MONTAGGIO 125
MONTAGGIO DEL DIFFUSORE O DEL DEFLETTORE AD ALETTE 126
ACCESSORI OPZIONALI 126
CURA, MANUTENZIONE E RIPARAZIONE 127
DIMENSIONI (MM) 128
DATI TECNICI 129
DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 130
DISTANZA MINIMA DA MATERIALI NORMALMENTE INFIAMMABILI 130
SMALTIMENTO 130
DICHIARAZIONI DEL FABBRICANTE 131
DMX
DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX / STEROWANIE DMX /
CONTROLLO DMX 132

6
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
ENGLISH
YOU HAVE MADE THE RIGHT CHOICE!
This device has been developed and manufactured to the highest quality standards to ensure
many years of problem-free operation. Please read this user manual carefully to be able to use
your new Cameo product quickly and optimally. Further information about Cameo Light is availab-
le on our website CAMEOLIGHT.COM.
INFORMATION ON THIS USER MANUAL
• Carefully read the safety instructions and the entire manual before operating the device.
• Observe the warnings on the device and in the user manual.
• Always keep the user manual within reach.
• If you sell or pass on the device, it is important that you also include this user manual, as it is an
integral part of the product.
INTENDED USE
The product is a device for event technology!
This product has been developed for professional use in the field of event technology and is not
suitable for use as domestic lighting!
Furthermore, this product is only intended for qualified users with specialist knowledge of event
technology!
Use of the product outside the specified technical data and operating conditions is considered
improper use!
Liability for damage and third-party damage to persons and property due to inappropriate use is
excluded!
The product is not suitable for:
• Use by persons (including children) with limited physical, sensory or mental abilities or lack of
experience and knowledge.
• Children (children must be instructed not to play with the device).
DEFINITIONS AND SYMBOL EXPLANATIONS
1. DANGER : The word DANGER, possibly in combination with a symbol, indicates immediately
dangerous situations or conditions for life and limb.
2. WARNING : The word WARNING, possibly in combination with a symbol, indicates potentially
dangerous situations or conditions for life and limb.
3. CAUTION : The word CAUTION, possibly in combination with a symbol, is used to indicate situa-
tions or conditions that may lead to injury.
4. ATTENTION : The word ATTENTION, possibly in combination with a symbol, refers to situations
or states that can lead to damage to property and/or the environment.

7
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
This symbol identifies hazards that can cause electric shock.
This symbol identifies hazardous areas or hazardous situations.
This symbol indicates hazards caused by hot surfaces.
This symbol indicates hazards caused by intense light sources.
This symbol denotes a device that does not contain any user-serviceable parts.
This symbol indicates additional information on the operation of the product.
SAFETY INSTRUCTIONS
HAZARD:
1. Do not open the device and do not perform any modifications.
2. If your device no longer functions properly, if liquids or objects get inside it or if it
has been damaged in any other way, switch it off immediately and disconnect it
from the mains. The device may be repaired only by authorised repair technicians.
3. For devices of protection class 1, the protective conductor must be connected
correctly. Never disconnect the protective conductor. Devices of protection class 2
do not have a protective conductor.
4. Ensure that live cables are not kinked or otherwise mechanically damaged.
5. Never bypass the device fuse.
WARNING:
1. The device may not be operated if it shows obvious signs of damage.
2. The device may only be installed in a voltage-free state.
3. If the device's power cable is damaged, the device may not be used.
4. Permanently connected power cables may only be replaced by a qualified person.

8
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
ATTENTION:
1. Do not switch on the device if it has been exposed to extreme temperature fluctu-
ations (for example, following transport). Moisture and condensation can damage
the device. Switch on the device only when it has reached room temperature.
2. Ensure that the voltage and frequency of the mains supply match the values spe-
cified on the device. If the device has a voltage selector switch, do not connect the
device until it has been set correctly. Use only suitable power cables.
3. To disconnect the device from the mains on all poles, it is not sufficient to press the
on/off switch on the device.
4. Make sure that the fuse used corresponds to the type printed on the device.
5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning
strikes).
6. Observe the specified maximum output current on devices with a Power Out
connection. Ensure that the total current consumption of all connected devices
does not exceed the specified value.
7 Replace plug-in power cables with original cables only.
HAZARD:
1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of
persons (including children) with reduced physical, sensory or mental capabilities.
2. Danger from falling down! Make sure that the device is securely installed and will
not fall down. Only use suitable stands or mounts (particularly for fixed installa-
tions). Ensure that accessories are properly installed and secured. Ensure that
applicable safety regulations are observed.
WARNING:
1. Use the device in the prescribed manner only.
2. Operate the device using only accessories of the type recommended and supplied
by the manufacturer.
3. Observe safety regulations applicable in your country during installation.
4. After connecting the device, ensure that all cables are routed so as to avoid dama-
ge or accidents, such as from tripping.
5. Always observe the specified minimum distance to normally flammable materials!
Unless explicitly stated, the minimum distance is 0.3m.

9
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
CAUTION:
1. Moving components such as mounting brackets or other movable components may
become jammed.
2. In the case of devices with motor-driven components, there is a risk of injury due
to the movement of the device. Sudden device movement can cause shockreac-
tions.
3. The housing surface of the device can become very hot during regular operation.
Ensure that accidental touching of the housing is not possible. Always allow the
lamp to cool sufficiently before removal, maintenance work and charging etc.
ATTENTION:
1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or
other heat sources. Ensure that the device is always installed in such a way that it
is sufficiently cooled and cannot overheat.
2. Do not place any ignition sources, such as burning candles, near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. For transport, use the original packaging or packaging provided by the manufactu-
rer.
5. Avoid any impacts to or shaking of the device.
6. Observe the IP rating and the ambient conditions such as temperature and humidi-
ty according to the specifications.
7 Devices can be continuously further developed. In the event of deviating information
on operating conditions, performance or other device properties between the user
manual and the device labelling, the information on the device always takes priority.
8. The device is not suitable for tropical climate zones or for operation over 2,000m
above sea level.
9 Unless explicitly stated, the device is not suitable for operation under marine condi-
tions.
PLEASE NOTE:
For conversion or retrofit sets or accessories provided by the manufacturer, it is
essential to observe the instructions included.

10
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!
1. Never look directly into the beam of light, not even for a short period of time.
2. Never look into the beam of light using optical devices such as a magnifying glass.
3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!
4. Permanently installed lamps are built into these lighting units. These may not be
replaced by the user. The lamps contained in this lighting unit may only be replaced
by the manufacturer, its service partner, or a similarly qualified person.
NOTES FOR MOBILE INDOOR DEVICES
1. Temporary operation! Event equipment is generally only designed for temporary
operation.
2. Continuous operation or permanent installation can impair the functioning of the
device and cause premature ageing.

11
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
The packaging includes:
X1 x Cameo X3D Spotlight
X1x power cable
XUser manual
INTRODUCTION
LED PAR with 31 x 15 W Daylight LEDs
CLX3D
CONTROL FUNCTIONS:
1 CH, 2 CH 16 bit, 4 CH 16 bit DMX control
Master/slave operation
Standalone operation
FEATURES:
31 x 15 W Daylight LEDs. DMX512. 5-pin DMX connectors. Quicklight via rotary-push encoder.
Operating voltage: 100–240 V AC.
The spotlight features the RDM standard (Remote Device Management). This remote device
management enables the status query and configuration of RDM end devices via an RDM-capable
controller, such as the optionally available Cameo UNICON (item number CLIREMOTE).
The Cameo UNICON also allows access to the entire fixture menu.

12
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
Flowing Text Letters
FONT: Helvetica Neue Lt Pro 47 Light Condensed
Letters Height in Scale1:1 = 2,469 mm (7pt)
Print Color PANTONE 429 C GREY
X3 EXHIBITION LAMP D SILKSCREEN PRINT 20221201
CMYK COLOR SCHEME FONTS CONVERTED INTO PATHS - SCALE 1:1
HEADLINE LETTERS
FONT: HELVETICA NEUE LT PRO 97 BLACK CONDENSED
LETTERS HEIGHT IN SCALE 1:1 = 3,0371 MM (8,609 pt)
PRINT COLOR PANTONE WHITE
CAMEO LOGO PRINT COLOR BLACK C
CAMEO LOGO PRINT DISPLAY PANTONE GREY 429 C
CAMEO LOGO DIMENSIONS (64,6mm Width X 10,6 mm Height)
12
3
4
56
7
1POWER IN
TRUE1-compatible mains input socket. Operating voltage 100–240 V AC/50–60 Hz. A suitable
mains cable with TRUE1 compatible plug is included.
2POWER OUT
TRUE1-compatible mains output socket. Facilitates power supply to other CAMEO spotlights.
Ensure that the total power consumption of all devices connected to the device does not exceed
the given ampere (A) value.
3FUSE
for 5 x 20mm fuses. IMPORTANT NOTE: Replace the fuse only with one of the same type and
rating. In the event of repeated fuse failure, please contact an authorised service centre.
4DMX IN
Male 5-pin XLR socket for connection to a DMX control device (e.g. DMX console).
5DMX OUT
Female 5-pin XLR socket for sending the DMX control signal.

13
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
6OLED DISPLAY
The OLED display shows the currently activated operating mode (main display), the menu items in
the menu and the numerical value or operating status in the corresponding menu items. If there
is no input for approx. 30 seconds, the display automatically returns to the main display. Note on
the main display in the operating modes with external control: As soon as the control signal is
interrupted, the characters in the display start flashing; if the control signal is present again, the
flashing stops.
7ROTARY-PUSH ENCODER
Use the rotary-push encoder to navigate in the unit menu and configure the spotlight:
Open the main menu: Press encoder
select (sub)menu item: Rotate encoder
open (sub)menu item: Press encoder
Change value or status: Turn encoder
Confirm change: Press encoder
Exit menu level: Select and confirm the arrow symbol
SECURING LUG
One safety eyelet each for securing the headlamp when mounted overhead is located on the top
and bottom of the headlamp.

14
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
OPERATION
PLEASE NOTE
• As soon as the spotlight is correctly connected to the power supply, the following are display-
ed in succession: “Update wait ...” (for service purposes only), “Welcome to Cameo”, the model
name and the software version. After this process, the spotlight is ready for operation and the
previously activated operating mode is launched.
• The main display is activated automatically if no input is made within approximately 30 se-
conds.
• If one of the DMX operating modes is activated and there is no DMX signal at the DMX input, the
characters in the display start flashing. Turning the encoder now activates the Quicklight mode
and you can set the brightness from 000 to 255 as desired.
MAIN DISPLAY
The main display shows the currently activated mode (in the example DMX mode with DMX start
address 001).
SETTING DMX START ADDRESS (DMX address)
Starting from the main display, press the encoder to enter the main menu. Now select the menu
item DMX Address and confirm. Set the desired DMX start address and confirm the entry (hig-
hest value depends on the currently set DMX operating mode).

15
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
CONFIGURING DMX MODE (DMX Mode)
Starting from the main display, press the encoder to enter the main menu. Now select the menu
item DMX Mode and confirm. Select the desired DMX operating mode and confirm the selection.
Tables with the channel assignments can be found in these instructions under DMX CONTROL.
STATIC STANDALONE MODE
The stand-alone operating mode Static makes it possible to set the dimmer and strobe directly
on the unit, similar to using a DMX control unit. In this way, an individual scene can be created
without an additional DMX controller.
Starting from the main display, press the encoder to enter the main menu. Now select the Stand
Alone menu item, confirm, then select Static and confirm again. Now select the menu item you
wish to edit and confirm. Set the desired value and confirm the entry. The values for the strobe
effect correspond to the values in channel 3 of the DMX table 4 CH 16 bit.
AUTO STANDALONE MODE
Adjust brightness (dimmer), speed (speed) and fade time (fade) as desired.
Starting from the main display, press the encoder to enter the main menu. Now select the Stand
Alone menu item, confirm, then select Auto and confirm again. Now select the menu item you
wish to edit and confirm. Set the desired value and confirm the entry.

16
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
TIMER FUNCTION
The timer function allows the standalone mode Static to be timer controlled in such a way that
the fade-in time can be set from 0 to 60 minutes, the dwell time from 1 to 24 hours and the
fade-out time from 0 to 60 minutes. Time control starts immediately after activating the timer
function in the previously activated standalone mode and remains active even if the spotlight is
switched off and restarted.
Starting from the main display, press the encoder to enter the main menu. Select the Stand
Alonemenu item, confirm, then select Timer and confirm again. Now select Fade In, Dwell Time
or Fade Out for the individual settings and confirm. A number field is shown in the display in each
case and you can set the value as desired from 1 to 60 or 1 to 24 by turning the encoder. Confirm
again. Once all settings have been made as desired, activate the timer function by selecting the
Timer On/Off sub-menu item, confirm, select On and confirm again (to deactivate the timer func-
tion, please select Off and confirm).
Note: The timer function is suitable for use in master/slave operation via cable.
SLAVE MODE
Starting from the main display, press the encoder to enter the main menu. Select the Slave
menu item and confirm the selection. Connect the slave and the master unit (same model, same
software version) using a DMX cable and activate one of the stand-alone modes (Static, Auto) in
the master unit. The slave unit will now follow the master unit.

17
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
SYSTEM SETTINGS (Settings)
Ausgehend von der Hauptanzeige gelangen Sie durch Drücken auf den Encoder in das Hauptmenü.
Select the Settings menu item and confirm the selection.
This will take you to the submenu for setting the submenu items. See table (rotate the encoder to
select and push the encoder to confirm selection, change value or status by rotating, confirm by
pressing encoder.
Settings
Display
Reverse
= Rotate display OFF No display rotation
ON Display is rotated by 180° (e.g. for over-
head installation)
Display Off
Timer
= Display lighting Off after
20s
Deactivates after approximately 20 se-
conds of inactivity
Always
On
On permanently
DMX fail = Operational status
with DMX signal
fault
Hold Last command is retained
or
blackout,
Activates blackout
Full Full On = maximum brightness
Standa-
lone
Stand Alone Mode Static is activated
Dimmer
curve
= Dimmer curve Linear Light intensity increases linearly with
DMX value
Exponen-
tial
Light intensity can be finely adjusted at
lower DMX values and broadly adjusted at
higher DMX values
Logarith-
mic
Light intensity can be broadly adjusted at
lower DMX values and finely adjusted at
higher DMX values
S-curve Light intensity can be finely adjusted at
lower and higher DMX values and broadly
adjusted at medium DMX values
Dimmer
response
= Dimmer response LED Light responds abruptly to changes in
DMX value

18
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
Dimmer
response
= Dimmer response Halogen Light behaves like a halogen spotlight
with slight brightness changes
PWM Fre-
quency
= LED PWM frequency 650Hz,
1530Hz,
3600Hz,
12000Hz,
18900Hz,
25000Hz
Select LED PWM frequency
Fan = Fan control Car Automatic fan speed control
Off Deactivated fan with greatly reduced
brightness
Constant
High
Constant high fan speed
Constant
Medium
Constant average fan speed with reduced
brightness, if necessary
Constant
Low
Constantly low fan speed with reduced
brightness, if necessary
Calibration = Calibration of the
Daylight LEDs
LED Individual calibration of the Daylight LEDs
to match the brightness to other head-
lights. Cross-mode brightness setting with
values from 000-255
Factory
Reset
= Reset to factory
settings
Reset
Now?
Yes / No
Reset with Yes, cancel with No
Service
Timer Reset
= Resetting the Ser-
vice Timer
Reset
Now?
Yes / No
Reset with Yes, cancel with No
SYSTEM INFORMATION (System Info)
Starting from the main display, press the encoder to enter the main menu. Select the System Info
menu item and confirm the selection.
This will take you to the submenu for accessing the system information (see table):

19
DMX DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKI
System Info
Firmware = Displays device
firmware
Main CPU
V1.xx
Temperature = Displays tempera-
ture of LED unit
Temperature LED xx°C / xx°F
Temperature
unit
°C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Operation
Hours
= Displays operating
time
Unit Operation
Time xx:xxh
Display of the unit operating time in
hours and minutes
LED Operation
Time xx:xxh
Display of LED operating time in hours
and minutes
Service Time Display of the unit operating time since
the last reset of the service timer in
hours and minutes

20
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
INSTALLATION
DANGER : Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
Mount a suitable truss clamp directly on the U-bracket (fig.A). An optionally available
Omega bracket can also be attached to the U-bracket (Fig. B). Installation on a truss is possible with
a truss clamp. Suitable truss clamps are optionally available.
Loosen the two clamping levers on the sides of the spotlight (fig. C) to adjust the beam direction on a
vertical plane and tighten the two clamping levers again after adjustment.
Always ensure firm connections and secure the headlamp with a suitable safety rope, depending on
the situation, to the safety eyelet on the top or bottom of the headlamp (Fig. D).
A
B
C
C
D
D