CamKix D0027-SRC-BLA User manual

CamKix Bluetooth Remote Shutter
With Bluetooth Wireless Technology
123
Easy Installation Guide
EN

Camera Shutter Remote Control
The CamKix Camera Shutter Remote Control will allow you to take pictures
or record videos with your phone/tablet using Bluetooth wireless
technology. You will only need to pair theremote with your device once.
Then you can have lots of fun with it. To pair it and use it, please follow
these 3 simple steps:
If present, remove the isolation strip. Make sure the
positive polarity (+) of the battery is facing upwards.
1Check the battery
Set the power switch of the remote control to “on”. The LED
on the remote will start to flash. On your phone or tablet, switch
Bluetooth on and search for available devices. Connect with the
device called “CamKix Shutter”.
2Pair the remote with your device

Camera Shutter Remote Control
On your Android or iOS phone/tablet, activate the camera
app. Press the shutter button of the remote control to take
a picture.
3Take a picture
If for some reason the camera app does not recognize the
shutter command of the remote control, install and use the
“Camera 360” app.
Camera 360
Battery type:
Wireless range:
Device name:
Coin/Button Cell
Up to 30 feet (10m)
CamKix Shutter
Specifications

This device complies with part 15 of the FCC rules Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. NOTE:The manufacturer is not responsible for
any radio orTVinterference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to operate the
equipment.
NOTE:This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. 
FCC Statement

FCC Statement
If this equipment does causeharmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
-This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter.
RF Exposure Information and Statement :
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.

Hereby, OEM Tech Bargains LLC declares that the radio equipment
type:
is in compliance with Directive 2014/53/EU.
The full text of the declaration of conformity is available at the
following website: camkix.com/doc
D0427-2SR-RNB
D0428-SRK-BLA
D0430-SRN-WHI
D0431-SRN-RED
D0432-SRN-BLU
D0433-2SN-BNW
CAMKIX Bluetooth Remote Shutter
D0027-SRC-BLA
D0027-SRC-BLU
D0027-SRC-GRE
D0027-SRC-RED
D0027-SRC-WHI
D0034-TRIP-WRC
D0035-TSK-BLA
D0039-WSK-BLA
D0223-LSB-BLA
D0224-LST-BLA
D0267-UTK-BLA
D0268-UTL-BLA
D0271-LSK-BLA
D0276-IP7-12R
D0278-S7E-12R
D0280-ULK-FS5
D0311-3LB-BLA
D0426-2SR-BNW
Regulatory Conformance（RED）
FCC ID: 2AUYP-CAMKIX
made in China
Radio specification
Frequency Range:
2400-2483.5MHz
Max.RF power: +3.9dBm
Distributed/Imported by:
OEM Tech Bargains LLC
446 W 4th AVE
Dayton, WY 82836

DE
CamKix Bluetooth Remote Shutter
Mit Bluetooth Wireless-Technologie
123
Einfach Installationsanleitung

Camera Shutter Remote Control
Mit der CamKix Camera Shutter-Fernbedienung können Sie Bilder
aufnehmenoder nehmen Sie Videos mit Ihrem Telefon / Tablet über
Bluetooth auf Technologie. Sie müssen die Fernbedienung nur einmal mit
Ihrem Gerät koppeln. Dann kannst du viel Spaß damit haben. Um es zu
koppeln und zu verwenden, folgen Sie bitte diese 3 einfachen schritte:
Falls vorhanden, entfernen Sie den Isolationsstreifen. Stellen
Sie sicher, dass Die positive Polarität (+) der Batterie zeigt
nach oben.
1Überprüfen Sie die Batterie
Stellen Sie den Hauptschalter der Fernbedienung auf "on". Die LED auf der
Fernbedienung beginnt zu blinken. Wechseln Sie auf Ihrem Telefon oder
Tablet Bluetooth ein und suche nach verfügbaren Geräten. Verbinden Sie
sich mit dem Gerät namens "CamKix Shutter".
2Koppeln Sie die Fernbedienung mit Ihrem Gerät

Camera Shutter Remote Control
Aktivieren Sie die Kamera auf Ihrem Android- oder iOS-Telefon
/ Tablet App. Drücken Sie den Auslöser der Fernbedienung, um
die Aufnahme zu machen ein Bild.
3Machen Sie ein Foto
Wenn aus irgendeinem Grund die Kamera-App das nicht
erkennt Shutter-Befehl der Fernbedienung, installieren und
verwenden Sie die App „Kamera 360“.
Camera 360
Batterietyp:
Funkreichweite:
Gerätename:
Münz- / Knopfzelle
Bis zu 10 m
CamKix Shutter
Specifications

Hiermit erklärt OEM Tech Bargains LLC, dass die Funkausrüstung
Art:
entspricht der Richtlinie 2014/53 / EU.
Den vollständigen Wortlaut der Konformitätserklärung finden Sie unter
folgende Website: camkix.com/doc
D0427-2SR-RNB
D0428-SRK-BLA
D0430-SRN-WHI
D0431-SRN-RED
D0432-SRN-BLU
D0433-2SN-BNW
CAMKIX Bluetooth Remote Shutter
D0027-SRC-BLA
D0027-SRC-BLU
D0027-SRC-GRE
D0027-SRC-RED
D0027-SRC-WHI
D0034-TRIP-WRC
D0035-TSK-BLA
D0039-WSK-BLA
D0223-LSB-BLA
D0224-LST-BLA
D0267-UTK-BLA
D0268-UTL-BLA
D0271-LSK-BLA
D0276-IP7-12R
D0278-S7E-12R
D0280-ULK-FS5
D0311-3LB-BLA
D0426-2SR-BNW
Gesetzliche Konformität（RED）
FCC ID: 2AUYP-CAMKIX
in China hergestellt
Funkspezifikation
Frequenzbereich: 2400-2483,5 MHz
Max. HF-Leistung: + 3,9 dBm
Vertrieb / Import durch:
OEM Tech Bargains
UNIT 3, LAKE FARM
ALLINGTON LANE, FAIR OAK
EASTLEIGH, SO50 7D

CamKix Bluetooth Remote Shutter
Avec la technologie sans fil Bluetooth
123
simple Guide d'installation
FR

Camera Shutter Remote Control
La télécommande de l'obturateur de caméra CamKix vous permettra de prendre
des photos ou enregistrer des vidéos avec votre téléphone / tablette en utilisant
la technologie sans fil Bluetooth La technologie. Vous n'aurez besoin d'appareiller
votre téléphone qu'une seule fois. Ensuite, vous pouvez avoir beaucoup de plaisir
avec elle. Pour l'appairer et l'utiliser, veuillez suivre ces 3 étapes simples:
Si présent, retirez la bande d'isolation. Assurez-vous que le
la polarité positive (+) de la batterie est tournée vers le haut.
1Vérifiez la batterie
Réglez le commutateur d’alimentation de la télécommande sur «on». La led
sur la télécommande va commencer à clignoter. Sur votre téléphone ou
votre tablette, basculez Bluetooth et recherchez les appareils disponibles.
Connectez-vous avec le appareil appelé "CamKix Shutter".
2Associez la télécommande à votre appareil

Camera Shutter Remote Control
Activez l'appareil photo sur votre téléphone / tablette Android
ou iOS. app. Appuyez sur le déclencheur de la télécommande
pour prendre Une image.
3Prendre une photo
Si, pour une raison quelconque, l'application de l'appareil photo
ne reconnaît pas le commande de l'obturateur de la
télécommande, installez et utilisez le Application «Caméra 360».
Camera 360
Type de batterie:
Gamme sans fil:
Nom de l'appareil:
Pièce de monnaie /
bouton
Jusqu'à 30 pieds
(10 m)
CamKix Shutter
Caractéristiques

OEM Tech Bargains LLC déclare que l'équipement radio type:
est conforme à la directive 2014/53 / UE.
Le texte complet de la déclaration de conformité est disponible sur le site
site Web suivant: camkix.com/doc
D0427-2SR-RNB
D0428-SRK-BLA
D0430-SRN-WHI
D0431-SRN-RED
D0432-SRN-BLU
D0433-2SN-BNW
CAMKIX Bluetooth Remote Shutter
D0027-SRC-BLA
D0027-SRC-BLU
D0027-SRC-GRE
D0027-SRC-RED
D0027-SRC-WHI
D0034-TRIP-WRC
D0035-TSK-BLA
D0039-WSK-BLA
D0223-LSB-BLA
D0224-LST-BLA
D0267-UTK-BLA
D0268-UTL-BLA
D0271-LSK-BLA
D0276-IP7-12R
D0278-S7E-12R
D0280-ULK-FS5
D0311-3LB-BLA
D0426-2SR-BNW
Conformité réglementaire（RED)
FCC ID: 2AUYP-CAMKIX
fabriqué en Chine
Spécification radio
Gamme de fréquences:
2400-2483.5MHz
Puissance Max.RF:
+ 3.9dBm
Distribué / Importé par:
OEM Tech Bargains
UNIT 3, LAKE FARM
ALLINGTON LANE, FAIR OAK
EASTLEIGH, SO50 7D

CamKix Bluetooth Remote Shutter
Con tecnologia wireless Bluetooth
123
Facile Guida d'installazione
IT

Camera Shutter Remote Control
Il telecomando dell'otturatore della fotocamera CamKix ti consentirà di
scattare foto o registra video con il tuo telefono / tablet tramite Bluetooth
wireless tecnologia. Dovrai solo associare theremote al tuo dispositivo una
volta. Allora puoi divertirti un sacco. Per abbinarlo e usarlo, segui questi 3
semplici passaggi:
Se presente, rimuovere la striscia di isolamento. Assicurati
che la polarità positiva (+) della batteria è rivolta verso l'alto.
1Controlla la batteria
Impostare l'interruttore di accensione del telecomando su "on". Il LED
sul telecomando inizierà a lampeggiare. Sul tuo telefono o tablet, passa
Bluetooth attivo e ricerca dei dispositivi disponibili. Connettiti con
dispositivo chiamato "CamKix Shutter".
2Associare il telecomando al dispositivo

Camera Shutter Remote Control
Sul tuo telefono / tablet Android o iOS, attiva la fotocamera
app. Premere il pulsante di scatto del telecomando per scattare
una foto.
3Fai una foto
Se per qualche motivo l'app della fotocamera non riconosce il
comando otturatore del telecomando, installa e usa il
App "Camera 360".
Camera 360
Tipo di batteria:
Portata wireless:
Nome del
dispositivo:
Cella a bottone / a
bottone
Fino a 10 metri
CamKix Shutter
specificazioni

Con la presente, OEM Tech Bargains LLC dichiara che l'apparecchiatura radio
genere:
è conforme alla direttiva 2014/53 / UE.
Il testo completo della dichiarazione di conformità è disponibile all'indirizzo
seguente sito web: camkix.com/doc
D0427-2SR-RNB
D0428-SRK-BLA
D0430-SRN-WHI
D0431-SRN-RED
D0432-SRN-BLU
D0433-2SN-BNW
CAMKIX Bluetooth Remote Shutter
D0027-SRC-BLA
D0027-SRC-BLU
D0027-SRC-GRE
D0027-SRC-RED
D0027-SRC-WHI
D0034-TRIP-WRC
D0035-TSK-BLA
D0039-WSK-BLA
D0223-LSB-BLA
D0224-LST-BLA
D0267-UTK-BLA
D0268-UTL-BLA
D0271-LSK-BLA
D0276-IP7-12R
D0278-S7E-12R
D0280-ULK-FS5
D0311-3LB-BLA
D0426-2SR-BNW
Conformità alle norme (RED)
FCC ID: 2AUYP-CAMKIX
fatto in Cina
Specifiche radio
Intervallo di frequenze:
2400-2483.5MHz
Potenza max. RF: + 3,9 dBm
Distribuito / importato da:
OEM Tech Bargains
UNIT 3, LAKE FARM
ALLINGTON LANE, FAIR OAK
EASTLEIGH, SO50 7D

CamKix Bluetooth Remote Shutter
Con tecnología inalámbrica Bluetooth
123
Fácil Guía de instalación
ES

Camera Shutter Remote Control
El control remoto del obturador de cámara CamKix te permitirá tomar fotos
o grabar videos con su teléfono / tableta usando Bluetooth inalámbrico
tecnología. Solo necesitará emparejar el motor remoto con su dispositivo
una vez. Entonces puedes divertirte mucho con él. Para emparejarlo y
usarlo, siga estos 3 simples pasos:
Si está presente, retire la tira de aislamiento. Asegúrate que
La polaridad positiva (+) de la batería está hacia arriba.
1Revisa la batería
Ajuste el interruptor de encendido del control remoto a "encendido". El LED
en el control remoto comenzará a parpadear. En su teléfono o tableta,
cambie Bluetooth activado y busque los dispositivos disponibles.
Conéctese con el dispositivo llamado "CamKix Shutter".
2Empareje el control remoto con su dispositivo