Campania International Borghese User manual

F
T
-
219
B
orghese
Fountain
R
evised
July21, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK120 pump (1)
#10 stopper(1)
Approx.6”length of1/2”blacknon-kinktubing (1)**
Approx.1”length of5/8”clearvinyltubing (1)**
Wedges(2)
Hose clamps(3)
*Hoseclamps maybe used asflow restrictors
**Internaltubing has been preassembled.
FOUNTAININFORMATION:
Thisfountain holdsapproximately2.5gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

F
T
-
219
B
orghese
Fountain
R
evised
July21, 2017
Assemble yourfountain on a levelsurface capable ofholdinga minimumof165 poundswith an approximate1 square
footfootprint.
FT-219C (86lbs)
12.5”Wx11.5”H
FT-219B (52lbs)
25.5”Lx20”Wx11.25”H
FT-219A(5lbs)
5.25”Wx10.5”H
1. Place thebase(FT-219C) into positionwhere thefountain
will beinstalled, ensuringthatitislevel.
2. Center thebowl(FT-219B) over thebase(FT-219C)
3. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2”non-kink tubing
to thepumpoutlet.
b. Place thestopper aroundthepumpcord
approximately4”fromthepump.
4. Feedthepumpcordthrough theholeinthebowl(FT-219B)
andthechannelinthebase(FT-219C).
5. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
6. Fit the5/8”clear tubing ontothecopper pipeprotruding
fromtheinsidebottomofthewater feature(FT-219A).
7. Carefullylower thewater feature (FT-219A)into thebasin.
a. Turnthefeaturetocoil thetubingasyou lower it into
position.
8. Fillthefountainwithwater.