Campania International FT-30 Palazzo User manual

FT
-
30
Palazzo
Urn
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
July11, 2018
PumpKitParts List
PK500 Pump (1)
#10 stopper(1)
½”x½”x½”Tconnector(1)**
Approx.12”length of½”non-kinktubing (1)**
Approx.6”length of½”non-kinktubing (2)**
Approx.30”length of½”blacknon-kinktubing (1)
8” lengthof 3/8” i.d. copper pipe(1)
6½” lengthof3/8”i.d. copperpipe(1)
3/8” i.d1/2" o.dcopper sleeves(3)
Plastic sprayhead (1)
Hose clamps(5)*
Wedges(4)
*Hoseclamps maybe used asflow restrictors
**The internaltubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately30 gallonofwater.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#7 Refill Device and LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

FT
-
30
Palazzo
Urn
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
July11, 2018
Assemble your fountainonalevel surface capable ofholdingaminimumof1135 poundswithanapproximate 14 squarefoot
footprint.
FT-29C/30D(579lbs)
45”Lx45”Wx11”H
FT-29B/30C(52lbs)
12”Lx12”Wx8”H
FT-30B (115lbs)
12”Lx12”Wx16.5”H
FT-30A(134lbs)
18”Lx18”Wx21”H
FT-29BB/30CC(4lbs)
5”Lx1”Wx5”H
1. Place thebasin(FT-29C/30D) intopositionwherethefountainwill beinstalled, ensuringthat it
islevel.
2. Assemble thepumpkit
a. Connect thepreassembledtubing
(diagramright) tothepumpby
slidingthe12"lengthofnon-kink
tubingover thepumpoutlet.
b. Place hoseclampsoneachofthe
endsofthe6”non-kinktubing.
c. Place thestopper aroundthepump
cord approximately8inchesfrom
thepump.
3. Feedthepumpcord through thehole inthe
basin(FT-29C/30D) andthechannel.
4. FIRMLYpress thestopper intothehole
evenly.
a. Note: Usingthehandle ofa
screwdriver or hammerworksbest
topress thestopper inplace.
5. Place thepumpcover (FT-29B/30C) over thepump. Ensureit isplacedproperlyandleveled.
BOTTOMOFCOLUMN(FT-30B)
6. Securethe2openended6”piecesofnon-kink tubing tothe2pipesprotruding fromthebottom
ofthecolumn(FT-30B).
7. Center thecolumn (FT-30B) on top ofthepumpcover (FT-29B/30C).
INSIDEOF COLUMN(FT-30B)
8. Useahoseclamptoattachthe30”lengthofnon-kink tubing tooneofthetwopipesprotruding
ontheinsideofthecolumn (FT-30B).
BOTTOMOFURN (FT-30A)
9. Useanother hoseclamptosecuretheother endofthe30”non-kinktubing tothepipeprotruding
fromthe CENTER oftheurn(FT-30A).
10. Center theurn(FT-30A) over thecolumn (FT-30B).
INSIDEOF URN (FT-30A)
11. Place acopper sleeveover eachofthecopper pipesinsidetheurn(FT-30A).
12. Place the8”copper pipeoverthepipeprotruding upfromthe CENTER oftheurn(FT-30A).
a. Ifasprayheadisdesired, place thethird copper sleeveover the8”copperpipethat is
centeredinsidetheurnandplace thesprayheadontothecopper sleeve.
13. Place the6½”copperpipeover theremainingpipeprotruding off-center insidetheurn.
14. Place thepumpcover door (FT-29BB/30CC) inthepumpaccess openingofthepumpcover
(FT-29D/30C).
15. Fill thebasinwithwater.