Campania International MONTEROS User manual

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
C A S T S TO N E C O L LE C T I O N
MONTEROS FOUNTAIN

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
Campania employs a talented group of artists who create original copyrighted designs that blend old world traditions with a
uniquely American sensibility. They are designed by hand, molded by hand, poured by hand, stained by hand, and packaged by
hand.
Campania’s cast stone pieces are manufactured with a high density cast stone mix, resulting in a PSI (pounds per square inch)
strength of approximately 7,500. The natural materials used in our mix are sourced locally. Our cast stone products can qualify for
LEED MR 5.1 and /or MR 5.2 credits as applicable to your project.
All of our cast stone products are available in 11 exclusive patinas in addition to natural cast stone. We hand apply each patina
in a multi-step process. Our patinas are designed to replicate the look of naturally aged materials and will not prevent the natural
aging process. Any cast stone item with a patina will weather naturally in an outdoor environment.
Our full collection of cast stone pieces include: planters, urns, pedestals, large estate fountains, wall fountains, garden foun-
tains, tables, benches, garden statues, Asian accents, finials, birdbaths and other accents.
 Hand-made in the USA by Campania
 High density 7,500 PSI cast stone
 Natural materials locally sourced
 Can qualify for LEED MR 5.1 and MR 5.2 credits
 Strong and durable for outdoor use
 Ages naturally over time
 Available in 11 exclusive patinas and natural (no patina applied)
 Many Sizes and Design Options: Traditional, Classic, Contemporary, Modern, and Transitional Styles
 Estate size fountain and basin systems, wall fountains, garden fountains
 Auto-refill devices, lights, and fountain covers available through Campania
 Pump Kits included
 All recommended commercial products and CAD files can be viewed at
www.campaniainternational.com/projects
 Full line can be viewed online at www.campaniainternational.com
C A M PA N I A CAST STONE FOUNTAINS
C A S T S TO N E C O L LE C T I O N
CAST STONE FOUNTAIN GENERAL CARE
Always place any Campania product on a solid level surface and not directly on grass, soil, or an uneven surface.
Proper winter care is recommended for all Campania cast stone fountains for protection in environments with potential freeze-thaw cycles.
 Drain Fountains and make sure that the basins are completely dry.
 If possible, remove pump, rubber stoppers, drainpipes, finials, and other small components for storage indoors. Note that stoppers or
drainpipes are removed to allow drainage in the event water accumulates in any basin. Compression stoppers may be left on the pump cord
for easier assembly next season.
If this is not possible
 Cover fountain with an appropriately sized fountain cover, available from Campania, making sure that water will not accumulate in the basin
or other fountain components and freeze.
 Check fountain periodically to insure that cover is secure and water is not accumulating in any fountain component.

Revised August 4, 2015
COMPONENTS AND PARTS LIST
FT-269 Monteros Fountain
(10 pieces)
NOTE: Component photos are not to scale
FT-114I
20” x 6”
140 lbs
Tools you will need
Level
4mm Allen wrench (included)
This fountain
uses cover
FTNCOV-XLG
FT-269A
Pump Kit Parts List
PK800 pump (1)
#10 compression stopper (1)
Approx. 2” length of ¾” clear vinyl tubing (1)**
Approx. 2” length of 5/8” clear vinyl tubing (1)**
Approx. 24” length of ½” black non-kink tubing (1)**
**Tubing will be preassembled
Approx. 18” length of ½” black non-kink tubing (1)
Hose clamps (4)
Wedges (6)
4mm Allen wrench (1)
#7 Drain stopper with wing nut tightener (2)
Note –Hose clamps may be used for restrictor flow
FT-269E
29”dia x 9.5”H
Fountain holds
approximately 25
gallons of water
FT-269G
6.25”L x 1.5”W x 5.25”H
FT-269H
24”W x 15”H
FT-269I
FT-269F
13.5”W x 18”H
P-711
47”W x 26”H
535 lbs
FT-269C
9.25”dia x 14”H
FT-269D
5”L x 1.5”W x4. 5”H
FT-269B
20.25”dia x 7” H

Revised August 4, 2015
ASSEMBLY INSTRUCTIONS
At least two people are required for the installation of this fountain!
1. Make sure you are assembling your fountain on a level surface capable of holding a minimum of 1520 pounds
within a 4 square foot footprint.
2. Be sure to check the leveling of the fountain after each component installation. If fountain components are not
properly leveled, the water will not flow correctly.
3. Place the Base (FT-269H) into position where the fountain will be installed.
4. Place the large urn (P-711) on top of the base.
5. Place drain stopper into the smaller hole in the urn and tighten.
6. Feed the pump cord through the hole in the large bowl and down through the pedestal leaving enough cord
length to work with the pump outside the pump cover.
7. Pull the remaining pump cord down through the urn and out the base.
8. To ensure a level installation, bring the pump cord out through the opening in the bottom of the base.
9. See enclosed stopper assembly instructions and complete before continuing.
10. Place the medium pedestal (FT-269F) over the pump in the center of the urn.
11. Connect the ½” black non-kink end of the 24” tubing assembly to the bottom of the medium bowl (FT-269E).
Tighten the hose clamp to ensure a good seal.
12. While dropping the tubing down through the medium pedestal, place the medium bowl on top of the pedestal.
13. Connect the ¾” clear vinyl end of the tubing assembly to the pump outlet.
14. Place the other drain stopper into the hole of the medium bowl and tighten to seal.
15. Place the small pedestal (FT-269C) into the center of the medium bowl.
16. Connect one end of the 18” black non-kink tubing to the bottom of the small bowl and tighten hose clamp for a
good seal.
17. While dropping the tubing down through the small pedestal, place the small bowl (FT-269B) on top of the small
pedestal.
18. Connect the other end of the 18” tubing to the top of the medium bowl and tighten hose clamp for a good seal.
19. Install the finial (FT-269A) into the small bowl by placing it over the pipe protruding up from the bowl.
20. Place doors (FT-269D, FT-269G and FT-269I) in the access openings of the pedestals..
21. Fill the large bowl with approximately 25 gallons of water.
a. NOTE: Do not run fountain without sufficient water. If the pump is allowed to run dry, it can damage
the pump.
WINTER CARE AND GENERAL FOUNTAIN INSTRUCTIONS
-W I N T E R C A R E -
Fountain bowls/tops and other fountain components, which collect water, should not be left outside in the winter since
any component, which fills with water and freezes may crack. Likewise components such as pedestals, which remain
in a basin, filled with water, which then freezes, may also crack or crumble. Ideally, therefore, a fountain should always
be stored indoors or in a dry protected place such as a covered porch away from the elements. However, if a fountain
must be left outside:
(1) Remove pump, rubber stoppers, drainpipes, finials, and other small components for storage indoors. Note
that stoppers or drainpipes are removed to allow drainage in the event water accumulates in any basin. Compression
stoppers may be left on the pump cord for easier assembly next season.
(2) Raise fountain base from ground with wood strips so that base will not freeze to the ground surface.
(3) Cover or wrap the fountain with burlap or other absorbent material (old blanket or towel) and then cover
securely with plastic, making sure that water will not accumulate in the basin or other fountain component and freeze;
(4) Check fountain periodically to insure that plastic is secure and water is not accumulating in any fountain
component. -G E N E R A L F O U N T A I N T I P S -
Install fountains on a level surface. You will need a properly grounded 110-volt (AC only) GFCI protected receptacle
near the fountain for your pump. All pumps are submersible and must be
completely underwater to function properly. Test all pumps and adjust to full
output prior to assembly. It is not recommended that fountains be placed
directly on grass or dirt. Position the channel opening at the base of each
fountain toward the electrical outlet to be used since the pump cord will be
threaded through this opening.
For more Campania product information visit www.campaniainternational.com
FT-269 Monteros Fountain
(10 pieces)
All of our cast stone is proudly

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
Campania’s cast stone products are available in a choice of three exclusive (3) acid stains and eight (8) exclusive natural
pigment stains in addition to natural cast stone. All of our patinas and acid stains are hand applied in a multi-step process,
producing uniquely beautiful original pieces. Designed to replicate the look of naturally aged materials, the patinas will not
prevent the natural aging process that occurs in an outdoor environment.
Campania’s acid stains (a mixture of water, metallic salts, and muriatic acid) penetrate the surface and react chemically
with elements in the cast stone, producing a rich saturated stain that resists flaking or peeling.
Like stains for wood, each piece will accept our patinas in varying degrees of intensity, creating natural variations that
add character and distinction to every piece. Even when applied with the same process, no two pieces will look exactly alike
due to the composition of the cast stone, and the varying age of the pieces. Rather than creating uniform stains, our
approach gives our products their unique beauty and appeal.
C A M PA N I A P a t i n a s
Alpine Stone (AS) Greystone (GS) Verde (VE) Copper Bronze (CB)
English Moss (EM) Aged Limestone (AL) Brownstone (BR) Travertine (TR)
Pietra Vecchia (PV)* Ferro Rustico (FR)* Terra Nera (TN)* Natural (NA)
* Denotes Acid Stain
Due to the hand-application process and photography, actual colors may vary slightly from those depicted in these examples. Please consult our
catalog photos and our website for examples of variations of our patinas.

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
FOUNTAIN REFILL DEVICE
By CAMPANIA
Specifications
Item # | Item Description | Dimensions (L x W x H) |Base Dimensions (L x W) | Weight (lbs)
REFILL #10 Fountain Refill Device with Stopper 6 x 3 x 5 6 x 3 3
REFILL #7 Fountain Refill Device with Stopper 6 x 3 x 5 6 x 3 3

Campania International, Inc. | 2452 Quakertown Road Suite 100, Pennsburg, PA 18073 USA | 215-541-4330
[e-mail] | www.campaniainternational.com/projects
FOUNTAIN COVERS
Specifications
Item # | Item Description | Dimensions (Diameter x H) | Weight (lbs) | Fits Fountains Up To H or D x H
FTNCOV-SM Fountain Cover Small 28 x 13 2 20
FTNCOV-MED Fountain Cover Medium 64 x 27 3 40
FTNCOV-LG Fountain Cover Large 70 x 34 4 35 x 65
FTNCOV-XLG Fountain Cover Extra Large 84 x 36 4.5 55 x 65