Campania International FT-131 User manual

F
T
-
131
Cascade
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
June2, 2017
PumpKitParts List
PK 300Pump (1)
#10 stopper(1)
Approx.18”length of1/2”BlackNon-Kinktubing (1)**
Approx.2”length 5/8”clearvinyltube (1)**
Approx.2”length 1/2"ofCPVCpipe (1)**
Wedges(4)
Hose clamps(3)*
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewisecomponentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately6gallonof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible with#10 Refill Device
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

F
T
-
131
Cascade
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
June2, 2017
Assemble yourfountainon alevel surface capable ofholdingaminimumof586 poundswithanapproximate 1.5squarefootfootprint.
FT-131F(50lbs)
18”Wx4.5”H
P-502(198lbs)
39.5”Wx9.75”H
FT-131C (25lbs)
11.5”Wx7”H
FT-131B (113lbs)
29.25”Wx8”H
FT-131A(28lbs)
18”Wx4.5”H
FT-131D(2lbs)
5”Lx1.5”Wx4.75”H
1. Placethe base (FT-131F)into position wherethe fountain willbe installed, ensuring
thatitislevel.
2. Centerthe Zen Bowl(P-502)overthe base(FT-131F)
3. Assemble the pump kit
a. Attach the 1/2” non-kinktubingto the pump outlet.
b. Placethe stopperaround the pump cord approximately8” fromthe pump.
4. Feed the pump cordthrough the holeinthe Zen Bowl(P-502)and the channelin the
base(FT-131F).
5. FIRMLY press the stopperintothe hole evenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto pressthe
stopperin place.
6. Placethe pump house(FT-131C)overthe pump and in the centerofthe Zen Bowl
(P-502).
7. Feed the tubingthatisconnected tothepump through the centerofthemiddle bowl
(FT-131B).
8. Centerthe middle bowl(FT-131B)overthe pump house (FT-131C).
9. Insert the CPVCpipe connected tothetubinginto the PVCcouplingin the bottom
ofthe top bowl(FT-131A).
10. Centerthe top bowl(FT-131A)overthe middle bowl(FT-131B).
11. Fit the pump house door(FT-131D)into the pump house (FT-131C).
12. Fillthe fountain with water.