Campania International Rittenhouse Fountain User manual

FT
-
277 RittenhouseFountain
Two people are recommended for the installation ofthisfountain!
R
evised
June2, 2017
PumpKitParts List
PK300 pump (1)
#10 stopper(1)
Approx.20”length of1/2”blacknon-kinktubing (1)
CopperSpillers (4)
2.8 oztubeofsilicone (1)
Wedges(4)
Hose clamps(3)*
*Hoseclamps maybe used asflow restrictors
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Device and LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

FT
-
277 RittenhouseFountain
Two people are recommended for the installation ofthisfountain!
Assemble yourfountainon alevel surface capable ofholdingaminimumof435 poundswithanapproximate 4.5squarefootfootprint.
FT-277F(178lbs)
30”Lx30”Wx8.5”H
FT-277D(22lbs)
8.5”Lx8.5”Wx7.5”H
FT-277C (31lbs)
7”Lx7”Wx9”H
FT-277B (28lbs)
15.5”Wx28”H
FT-277A(2lbs)
6.75”Wx1”H
FT-277E(3lbs)
4”Lx1”Wx5”H
1. Place thebasin (FT-277F)into position where thefountain will beinstalled,
ensuringthatit is level.
2. Assemblethepump kit
a. Connectthe tubingtothe pump outlet.
b. Placethe stopperaround the pump cord approximately8 inchesfromthe pump.
3. Feed thepump cord through theholein thebasin (FT-277F)and thechannel.
4. FIRMLYpress thestopper into theholeevenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto pressthe
stopperin place.
5. Place thepump house(FT-277D) overthepump and in thecenter ofthebasin
(FT-277F).
6. Center thepedestal(FT-277C)over thepump house(FT-277D).
7. Feed thetubingconnected to thepump through theholein thecenterofthe
pedestal(FT-277C).
8. Center thebowl(FT-277B)overthepedestal(FT-277C).
9. Useahoseclamp to secure thetubingto thepipeprotrudingfromthebottomof
thebowl(FT-277B).
10. Usethesiliconeprovidedto attach thecopper spillers
a. Clean awayanyexcess silicone.
11. Place thewater controldisc(FT-277A) into thebowl(FT-277B).
12. Fit thepump housedoor(FT-277E)into thepump house(FT-277D).
13. Letthefountain sit 24 hours beforefillingwith water.
uniquegardendecor.com
[phone]