Campania International Solaris FT- 232 User manual

FT
-
232SolarisFountain
Two people are recommended for the installation ofthisfountain!
Revised
June15, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
Approx.12”length of1/2”blacknon-kinktubing (1)**
2”length of5/8”cleartubing (1)**
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
** Tubing ispreassebled
FOUNTAININFORMATION:
Thisfountain holdsapproximately8gallonsof water.
Thisfountain usesalargefountain cover.
(FTNCOV-LG)
Compatible withRefill #10 Device and LEDkits
(A specialstopperisrequiredfor the refill device.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 - 140GPH Pump
6FTcord length

FT
-
232SolarisFountain
Two people are recommended for the installation ofthisfountain!
Revised
June15, 2018
Assembleyourfountain onalevelsurface capableofholdingaminimumof487poundswith
anapproximate3.25 square foot footprint.
FT-232A(413 lbs)
25.75”Lx18”Wx41.25”H
FT-165B(6 lbs)
9”Lx5.5”WX5”H
1. Position thebasin(FT-232A)wherethe
fountainistobeinstalled, ensuring that it is
level.
2. Assemble thepumpand tubing
a. NOTE:All pumpscomewith1
adapter alreadyinsertedintothe
pumpand 2adapterssecured tothe
power cord.
i. Thisfountain usesthe largest
adapter provided.
b. Using ahoseclamp, attachthe1/2”
non-kinktubing tothepumpoutlet.
c. Place thestopper around thepump
cordapproximately6inchesfromthe
pump.
3. Feedthepumpcordthrough thehole inthe
basin(FT-232A).
4. FIRMLYpressthestopper intothehole
evenly.
a. Note: Using thehandle ofa
screwdriveror hammerworksbestto
press thestopper inplace.
5. Slidetheclear end ofthetubingassembly
tothepipeprotruding at thebottomofthe
basin(FT-232A).
6. Place thepumpcover (FT-165B) over the
pump.
7. Fill thefountainwithwater.