Campania International Vicobello User manual

FT
-
114 VicobelloFountain
Three people are recommended for the installation ofthisfountain!
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK300 pump (1)
#10 stopper(1)
#7 DrainStopper(1)
Approx.20”length of½”BlackNon-Kinktubing (1)
Approx.15”length of½”BlackNon-Kinktubing (1)
Hose clamps(5)*
Wedges(4)
*Hoseclamps maybe used asflow restrictors
FOUNTAININFORMATION:
Thisfountain holdsapproximately21 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Device and LEDKit
(A different style stopper mayberequestedfor therefillkit.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length
Revised April 23, 2018
SHOP NOW
SHOP NOW

FT
-
114 VicobelloFountain
Three people are recommended for the installation ofthisfountain!
Assembleyourfountainonalevelsurface capableofholdingaminimumof1052 poundswithanapproximate2.75 squarefootfootprint.
FT-114I (140lbs)
20”Lx20”Wx6”H
FT-114H (150 lbs)
15.5”Lx15.5”Wx18”H
FT-114G (327 lbs)
47”Wx6.5”H
FT-114E (60lbs)
12.5”Wx16.25”H
FT-114D (116 lbs)
32”Wx9.5”H
FT-114C(39 lbs)
13”Wx14.5”H
FT-114B(27 lbs)
18.25”Wx5.25”H
FT-114A(11 lbs)
5.5”Wx11”H
FT-114F(3lbs)
5.25”Lx2”Wx4”H
1. Placethe base (FT-114I)into position wherethe fountain willbe installed, ensuringthatit islevel.
a. Note:Check thatall components are leveledasthe fountain isassembled.
2. Centerthe large pedestal(FT-114H)overthe base.
3. Assemble the fountain plumbing
a. Attach the 20”length ofnon-kinktubingto the pump outlet.
b. Placethe stopperaround the pump cord approximately6” fromthe pump.
4. Centerthe large bowl(FT-114G)overthe large pedestal(FT-114H)makingsure the holesline up.
5. Feed the pump cordallthe waythrough the holesin the bowl(FT-114F)and pedestal(FT-114H)then
outofthe accessdoorinthe base (FT-114I).
6. FIRMLY press the stopperintothe hole evenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto pressthe stopperin place.
7. Positionthe mediumpedestal(FT-114E)overthe pump inthe large bowl(FT-114G).
8. Feed the non-kinktubingconnected tothe pump through the top ofthe mediumpedestal(FT-114E).
9. Usinga hoseclamp, securethe loose end ofthe 20” length ofnon-kinktubingto the pipe protruding
fromthe bottomofthe mediumbowl(FT-114D).
10. Centerthe mediumbowl(FT-114D)overthe mediumpedestal(FT-114E).
11. Connectthe 15” length ofnon-kinktubingto thepipe protrudingfrominside the mediumbowl(FT-
114D)with a hoseclamp.
12. Positionthe small pedestal(FT-114C)overthe centerofthe mediumbowl(FT-114D).
13. Feed the non-kinktubingthrough the holeinthe small pedestal(FT-114C).
14. Usinga hoseclamp, securethe loose end ofthe non-kinktubingtothe pipe protrudingfromthe
bottomofthe smallbowl(FT-114B).
15. Centerthe small bowl(FT-114B)overthe smallpedestal(FT-114C).
16. Fit the finial(FT-114A)into the small bowl (FT-114B)byfeedingthe protrudingcopperpipe fromthe
bowlintothe holeinthe bottomofthe finial.
17. Placethe pump coverdoor(FT-114F)intothemediumpedestal(FT-114E).
18. Fillthe fountain with water.
Revised April 23, 2018
SHOP NOW