Campania International FT-226 Passaros II User manual

FT
-
226 PassarosII Fountain
Two people are recommended for the installation ofthisfountain!
Revised
June2, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK300 pump (1)
#10 stopper(1)
Approx.20”length of1/2”Blacknon-kinktubing (1)**
Approx.2”length of5/8”cleartubing (1)**
2”length of1/2"CPVCpipe(1)**
Wedges(2)
Hose clamps(3)*
*Hoseclampscan be used asflowrestrictors.
FOUNTAININFORMATION:
Thisfountain holdsapproximately7gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Compatible withRefill #7 Device
(A different style stopper mayberequestedfor thispart.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

FT
-
226 PassarosII Fountain
Two people are recommended for the installation ofthisfountain!
Revised
June2, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof300poundswith
anapproximate1square foot footprint.
FT-226B(186lbs)
23.5”Wx26.5”H
FT-226A(52 lbs)
18.5”Wx7.5”H
1. Position thebasin (FT-226B) where thefountain
is to beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit.
a. Using ahoseclamp, attachthetubing to
thepumpoutlet.
b. Place thestopper aroundthepumpcord
about6”fromthepump.
3. Feedthepumpcordall thewaythroughthehole
andthechannelinthebasin(FT-226B) to
ensure thefountainwillbelevel.
4. FIRMLY pressthestopper intotheholeevenly.
a. Note: Usingthehandleofascrewdriver
orhammer works best.
5. Holdingthewaterfeaturedisc(FT-226A)over
thebasin(FT-226B),insertthe1/2"CPVC
alreadyconnectedtothetubingassemblyinto
theCPVCcouplingunderneaththewater feature
(FT-226A).
6. Center thewater feature (FT-226A)into basin
(FT-226B).
7. Fillthefountainwithwater.