C&C TECHNIC VAX-8204F User manual

VIDEO/AUDIO
MATRIX
(VAX-8202F)
2 In 2 Out
(VAX-8204F)
2 In 4 Out
USERMANUAL V1.0
VAX-8202F / VAX-8204F
Package Contents-
1 Smart View VAX-8202F or VAX-8204F video/audio
matrix
1 user manual
1 power adapter DC 12V 600mA
Any thing missed, please contact with your vendor.
Introduction
Through the video/audio matrix VAX-8202F, 8204F, you can
display / play different images / audio signals to 2,4 monitors /
speakers (or earphones) through 2 PC; meanwhile, optional
means for controlling monitor’s image either come from PC “A” or
PC “B” or just switching off.
Video/Audio matrix is ideal for:
Test bench facilities
Data center
Help desks
Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities
Features
Intelligent functionality.
With 250 MHz pixel frequency.
Support VGA, SVGA, UXGA, QXGA resolutions.
Support Multi-Sync video type include RGBHV, RGsB, RGBS.
Support synchronous Include positive, negative; TTL or 1Vpp
level.
Supports the DDC, DDC2, DDC2B.
The output is compatible with standard VGA card.
Extends the video signal up to 65 meter (213 feet).
Audio Frequency Response 20Hz~20KHz.
Free select from PC ○
Aor PC ○ Bor switch off by means of the
front panel switch.
Can be cascaded.
Specifications
Function VAX-8202F VAX-8204F
Video Input Connector 2x HD-15 Female
Video Output Connector 2x HD-15
Female
4x HD-15
Female
Audio Input Connector 2x 3.5φStereo Jack
Audio Output Connector 2x 3.5φStereo
Jack
4x 3.5φStereo
Jack
Select Switch 2 4
A (Green) 2 4
Linked LEDs B (Red) 2 4
Max. Resolution 1920x1440 @ 85 Hz
Pixel Frequency 250 MHz
Cable Distance
(Device to Monitor) 65m (213 feet) Max.
Power Adapter (Min.) DC 12V 600mA
Housing Metal
Weight 450 g 680 g
Dimensions (LxWxH) 130x75x42 mm 200x75x42 mm
-1-
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1 Red video 9 NC
2 Green video 10 Ground
3 Blue video 11 NC
4 NC 12 ID1
5 Ground 13 Horizontal sync
6 Analog ground 14 Vertical sync
7 Analog ground 15 ID3
8 Analog ground
FRONT VIEW
1. Select Switch
2. ○
A,○ BLinked
REAR VIEW
1. Input Power Jack
2. “Audio Out” Port
3. ○
A,○ B“Audio In” Port
4. “Video Out” Port
5. ○
A,○ B“Video In” Port
*There are 2/4 ports for VX-8202F / VX-8204F
-2-

Installation
1. Turn off the power switches of PC, monitors, and
speakers.
2. Use HD-15 image / 3.5φearphone extension cable to
connect VGA interface / audio card in PC and the
“Video In“ & “Audio In“ jack of video/audio matrix.
3. Use HD-15 image / 3.5φearphone extension cable to
connect monitor, speaker, or earphone and the “Video
Out“ & “Audio Out“ jack of video/audio matrix.
4. Connect video/audio matrix to power supply.
5. Turn on the power switches of PC, monitors, and
speakers.
6. Control front panel switch to obtain the images / audio
either come from PC ○
A(Linked LED “○ A” on) or PC ○ B
(Linked LED “○
B” on) or just switching off. (Linked LED
“○
A○ B” off)
Note:
All the “Video/Audio Out” ports will connect with the
“Video/Audio In” port of ○
Awhile turning on the video
matrix.
If you install the DDC monitor for the video matrix, the
rest of monitors must be the same resolution as the DDC
monitor.
Through the functionality of DDC monitor, the “Video In”
port of ○
Awill connect with the “Video Out” port 1 and
the “Video In” port of ○
Bwill connect with the “video out”
port 2.
Available monitors include the VGA, SVGA, XGA,
Multisync, and exclude the CGA, EGA, Mono.
Operation for cascade:
1. The function to display / play different images / audio on
more monitors / speakers, you request to attach another
video/audio matrix or the standard video/audio splitter.
2. Connect the HD-15 male/male video extension cable
between the “Video Out” port of the former video/audio
matrix and the “Video In” port of the latter video/audio
matrix.
3. Connect the 3.5φStereo plug male/male audio extension
cable between the “Audio Out” port of the former
video/audio matrix and the “Audio In” port of the latter
video/audio matrix.
-3-
Note:
Even though you are allowed to cascade the video/audio
matrix with varied ports, the image might become unstable
if cascade too many tiers of video/audio matrixes.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-