Canon imageRUNNER 2320 User manual

Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference. ENGLISH
User's Guide

imageRUNNER 2320/2318
User’s Guide

Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
Depending on the system configuration and product purchased, some manuals may not be needed.
*1 The manual is needed only if the optional Network Kit is attached to the machine.
Guides with this symbol are printed manuals. Guides with this symbol are PDF manuals included on the
accompanying disc. (See footnote.)
•Quick Reference for Basic Operations Easy Operation Guide
•Setup Instructions
•Basic Operations User's Guide
(This Document)
•Basic Operations
•Troubleshooting Reference Guide
•Copying Instructions Copying Guide
•Remote User Interface Instructions Remote UI Guide*1
•Network Connectivity and Setup Instructions Network Guide*1
•Color Network ScanGear Instructions Network ScanGear
Guide*1
•UFR II LT Printer Instructions UFR II Printer Guide
•UFR II LT Printer Driver Instructions Windows Printer Driver
Guide
To view the manual in PDF format, Adobe Reader/Adobe Acrobat Reader is required. If Adobe Reader/Adobe Acrobat Reader is not installed on your
system, please download it from the Adobe Systems Incorporated website.

iii
User Manual Disc
The User Manual disc is software that enables you to select and view PDF Manuals
included on the disc via your computer screen. Follow the instructions below to use
the User Manual disc.
NOTE
Depending on the system configuration and product purchased, some manuals may not
be needed.
System Requirements
The User Manual disc can be used in the following system environments.
IMPORTANT
Depending on the configuration of your computer, some functions may not operate
correctly. If the PDF manual does not open from the disc Menu, open the PDF file directly
from the [Manuals] folder on the User Manual disc.
Windows Macintosh
OS
Windows 2000 (Service Pack 4 or later)
Windows XP (Service Pack 1a or later)
Windows Vista (Service Pack 2 or later)
Windows 7
Windows Server 2003
Mac OS X 10.4.x or later
Memory The memory required to run the above operating systems
Computer A computer that can run the above operating systems
Display A resolution of 1024 pixels x 768 pixels or higher

iv
Using the Disc Menu
This section describes how to use the disc Menu. When you insert the User Manual
disc provided into the disc drive, the Language Selection window appears.
Selecting a language on this window displays the following menu. (The sample
screen shot shown here is for Windows users.)
NOTE
For Macintosh users, double-click the [START] icon to start the disc Menu. The
Language Selection window is displayed.
The screen shot shown above may differ from the actual display, depending on the
operating system used.
aBROWSE MANUAL
You can read any of the listed guides by
clicking on the desired guide. After clicking
on the desired guide, Adobe Reader/Adobe
Acrobat Reader starts, and the PDF manual
is displayed.
bINSTALL
You can install the listed PDF manuals on
your computer. After clicking [INSTALL],
select the location where you want to save
the files.
cRETURN
Click to return to the Language Selection
menu.
dEXIT
Click to exit the disc menu.

How This Manual Is Organized
Before You Start Using This Machine
Basic Operations
Routine Maintenance
Troubleshooting
Appendix
Includes the descriptions of multi-functional operations, available paper stock, and
Index.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our
products, if you need an exact specification, please contact Canon.

vi
Contents
User Manual disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Using the disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Keys Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Illustrations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Abbreviations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Operations and Terms Used in This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
Legal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii
Product Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
EMC Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
International Energy Star Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
IPv6 Ready Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
WEEE Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Third Party Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii
Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Legal Limitations on the Usage of Your Product and the Use of Images. . . . . xix
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxii
Maintenance and Inspections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxvii
Other Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxvii
Chapter 1 Before You Start Using This Machine
Installation Location and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2
Avoid Installing the Machine in the Following Locations . . . . . . . . . . . . . .1-2
Select a Safe Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

vii
Provide Adequate Installation Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Moving the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Handling Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Parts and Their Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9
External View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9
Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
Main Power and Control Panel Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
How to Turn ON the Main Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Control Panel Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
Setting Up the Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
Settings Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
Connecting to a USB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19
Connecting to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Using Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20
Before Using the machine as a printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-22
Installing the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22
UFR II LT User Software disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-23
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
Setting Up the Printer Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-24
Before Using the Remote Scan Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-25
Installing the Scanner Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27
Required Settings for Remote Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-27
Chapter 2 Basic Operations
What This Machine Can Do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Placing Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Platen Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Feeder (DADF-P2) (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Basic Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Basic Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Basic Remote Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18
Canceling a Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Using the Stop Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Using the System Monitor Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22

viii
Chapter 3 Routine Maintenance
Paper Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Adjusting a Paper Drawer to Hold a Different Paper Size . . . . . . . . . . . . . . . .3-6
Replacing the Toner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10
Chapter 4 Troubleshooting
Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Clearing Paper Jams with On-Screen Instructions . . . . . . . . . . . . . . . . . . . . .4-2
When Paper Jams Occur Frequently . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3
List of Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Self-Diagnostic Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Service Call Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
Contacting Your Local Authorized Canon Dealer . . . . . . . . . . . . . . . . . . . . .4-11
Chapter 5 Appendix
Multifunctional Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2
Available Paper Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

ix
Preface
Thank you for purchasing the Canon imageRUNNER 2320/2318. Please read this manual
thoroughly before operating the machine to familiarize yourself with its capabilities, and to
make the most of its many functions. After reading this manual, store it in a safe place for
future reference.
How to Use This Manual
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, restrictions,
handling precautions, and instructions that should be observed for safety.
WARNING Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. To use the machine safely,
always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. To use the
machine safely, always pay attention to these cautions.
IMPORTANT Indicates operational requirements and restrictions. Be sure to read
these items carefully to operate the machine correctly, and avoid
damage to the machine.
NOTE Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Keys Used in This Manual
The following symbols and key names are a few examples of how keys to be
pressed are expressed in this manual:
Control Panel Keys Example
[Key icon] [ ]
Key icon + (Key Name) (Additional Functions)
[Key Name] [OK]

x
Illustrations Used in This Manual
Illustrations used in this manual are those displayed when the
imageRUNNER 2318 has the following optional equipment attached to it: the
Feeder (DADF-P2), Finisher-U2, Additional Finisher Tray-C1, Cassette Feeding
Module-J1, and Cassette Feeding Module-K1.
Abbreviations Used in This Manual
In this manual, product names and model names are abbreviated as follows:
Microsoft Windows 2000: Windows 2000
Microsoft Windows XP: Windows XP
Microsoft Windows Vista operating system: Windows Vista
Windows 7 operating system: Windows 7
Microsoft Windows Server 2003: Windows Server 2003
Microsoft Windows Server 2008: Windows Server 2008
Microsoft Windows operating system: Windows

xi
Operations and Terms Used in This Manual
This machine makes effective use of memory to perform print operations efficiently.
For example, as soon as the machine has scanned the original that you want to
copy, it can immediately scan the next person’s original. You can also print from
this machine, using a function other than the Copy function. In this machine, these
operations take place in a complex way, so that not only copies, but also various
kinds of prints may sometimes have to wait their turn before they can be printed.
To avoid confusion when reading this manual, the terms “scanning,” “printing,” and
“copying,” used throughout this manual are defined below. When making a copy,
the process of scanning originals and printing copies may be described as separate
functions.
Scanning an original to be
copied or sent to a client
computer.
Scanning
Scanning an original to be
copied or sent to a client
computer.
Scanning

xii
Printing
Outputting documents such as a copy
or data sent from a client computer to
the machine.
Copying
Printing data scanned from
an original, followed by
finishing options, such as
stapling.

xiii
Legal Notices
Product Name
Safety regulations require the product’s name to be registered. In some regions
where this product is sold, the following name(s) in ( ) may be registered instead.
imageRUNNER 2320/2318 (F190600)
EMC Directive
This equipment conforms with the essential requirements of
EC Directive 2004/108/EC.
We declare that this product conforms with the EMC requirements of
EC Directive 2004/108/EC at nominal mains input 230V, 50Hz although the rated
input of the product is 220-240V, 50/60Hz.
Use of shielded cable is necessary to comply with the technical requirements of
EMC Directive.
Laser Safety
This product is certificated as a Class 1 laser product under IEC60825-1: 2007
and EN60825-1: 2007. This means that the product does not produce hazardous
laser radiation.
Since radiation emitted inside the product is completely confined within protective
housings and external covers, the laser beam cannot escape from the machine
during any phase of user operation. Do not remove protective housings or external
covers, except as directed by the equipment’s manual.
Additional Information
When servicing or adjusting the optical system of the product, be careful not to
place screwdrivers or other shiny objects in the path of the laser beam. Also,
accessories such as watches and rings should be removed before working on the
product. The reflected beam, whether visible or invisible, can permanently damage
your eyes.

xiv
The labels shown below are attached to the laser scanner unit inside the machine
and next to the toner cartridge behind the front cover.
This product has been classified under IEC60825-1: 2007 and EN60825-1: 2007,
which conform to the following classes:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL Á LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
CAUTION
Use of controls, adjustments, or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.

xv
International Energy Star Program
IPv6 Ready Logo
As an ENERGY STAR®Partner, Canon Inc. has determined that this
machine meets the ENERGY STAR®Program guidelines for energy
efficiency.
The International ENERGY STAR®Office Equipment Program is an
international program that promotes energy saving through the
use of computers and other office equipment. The program backs
the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in
which business proprietors can participate voluntarily. The
targeted products are office equipment, such as computers,
displays, printers, facsimiles, and copiers. The standards and
logos are uniform among participating nations.
The protocol stack included in this machine has obtained the
IPv6 Ready Logo Phase-1 established by the IPv6 Forum.

xvi
WEEE Directive
Trademarks
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
Windows, Windows logo, Windows Vista, and Windows Vista logo are trademarks
or registered trademarks of Microsoft Corporation in the U.S. and/or other
countries.
Other product and company names herein may be the trademarks of their
respective owners.
Copyright
Copyright 2009 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, or by any
information storage or retrieval system without the prior written permission of
Canon Inc.
European Union (and EEA) only.
These symbols indicate that this product is not to be disposed of with your household waste, according
to the WEEE Directive (2002/96/EC), the Battery Directive (2006/66/EC) and/or your national laws
implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in accordance with the Directive, this
indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or
accumulator at a concentration above an applicable threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized one-for-one
basis when you buy a new similar product or to an authorized collection site for recycling waste electrical
and electronic equipment (EEE) and batteries and accumulators. Improper handling of this type of waste
could have a possible impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources.
For more information about the recycling of this product, please contact your local city office, waste
authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/
environment.
(EEA: Norway, Iceland and Liechtenstein)

xvii
Third Party Software
Third Party Software
A. This product includes third-party software modules. Use and distribution of this
software modules (the “SOFTWARE”) are subject to conditions (1) through (9)
below.
(1) You agree that you will comply with any applicable export control laws,
restrictions or regulations of the countries involved in the event that this
product including the SOFTWARE is shipped, transferred or exported into
any country.
(2) Rights holders of the SOFTWARE retain in all respects the title, ownership
and intellectual property rights in and to the SOFTWARE. Except as
expressly provided herein, no license or right, expressed or implied, is
hereby conveyed or granted by rights holders of the SOFTWARE to you for
any intellectual property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use with the Canon product you
purchased (the “PRODUCT”).
(4) You may not assign, sublicense, market, distribute, or transfer the
SOFTWARE to any third party without prior written consent of rights holders
of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the SOFTWARE only
when (a) you assign all of your rights to the PRODUCT and all rights and
obligations under the conditions to transferee and (b) such transferee
agrees to be bound by all these conditions.
(6) You may not decompile, reverse engineer, disassemble or otherwise
reduce the code of the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the SOFTWARE
or create derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of the SOFTWARE
from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is not
licensed to you.
B. Notwithstanding above, in case the other conditions accompany third-party
software modules, these software modules are subject to the other conditions.
The Software Subjected to the Other Conditions
Please refer to <The Software Subjected to the Other Conditions> section for more
detail and corresponding license conditions.

xviii
The Software Subjected to the Other Conditions
This product contains software licensed under the following terms and conditions.
Copyright (C) 1998-2004 WIDE Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
3. Neither the name of the project nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE
LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF
THIS MATERIAL.