Canon PIXMA MG6120 Series Manual

<< Previous Next >>
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG6120
Windows OS
1

<< Previous Next >>
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG6120
Windows OS
2
Preparing to Connect My Multifunction To My Network
3
Installing The MG6120 Software
5

Preparing to Connect My Multifunction
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
3
<< Previous Next >>

Preparing to Connect My Multifunction
To My Network
4
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
•In an office setup, consult your network administrator
•If you connect to a network that is not protected with security measures,
there is a risk of disclosing data such as your personal information to a third
party.
•If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
•Place the machine and computer on the same network segment.
An "Ad-hoc connection,"which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Be sure to prepare an access point.
<< Previous Next >>

Installing The MG6120 Software
5
<< Previous Next >>
If the machine is already connected to a wireless connection, it
can be used from additional computers on the same network.
Before we begin:
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•If the firewall function of your security software is turned on, a warning message
may appear that Canon software is attempting to access the network. If such a
warning message appears, set the security software to always allow access.

Installing The MG6120 Software
6
<< Previous Next >>
Step 1
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM
drive. If you are using Windows, the
setup program starts automatically.
Note:
If the program does not start automatically, double-click
the CD-ROM icon in Computer or My Computer. When
the CD-ROM contents appear, double-click MSETUP4.EXE.
Step 2
Windows 7/Windows Vista.
For Windows XP, skip to Step 3.
Click Run Msetup4.exe on the
AutoPlay screen, then click Yes or
Continue on the User Account
Control dialog box.
If the User Account Control dialog box reappears in
following steps, click Yes or Continue.

Installing The MG6120 Software
7
<< Previous Next >>
Step 3
Click Easy Install
The drivers, application software, and
on-screen manuals are installed.
Note: If you want to select particular
items to install, click Custom Install.
Step 4
Click Install

Installing The MG6120 Software
8
<< Previous Next >>
Step 5
Select Use the printer on network,
then click Next.
Step 6
Select Next or Skip.
Selecting Next will download and install the Easy-
WebPrint EX software. Easy-WebPrint EX is Web print
software. Internet Explorer 7 or later is required to use
this software. An Internet connection is required for
installation.

Installing The MG6120 Software
9
<< Previous Next >>
Step 7
When the Printer Detection screen
appears, click Next.
Step 8
When the Detected Printers List
screen appears, select Canon
MG6100 series, then click Next.
IMPORTANT
IF THE PRINTER CONNECTION SCREEN APPEARS INSTEAD OF THE
SCREEN ABOVE, THE CONNECTION METHOD IS NOT CORRECTLY
SELECTED IN 5.
CLICK CANCEL AND START AGAIN FROM STEP 1, THEN BE SURE TO
SELECT USE THE PRINTER ON NETWORK IN 5.

Installing The MG6120 Software
10
<< Previous Next >>
Step 9
Click Complete on the Setup
Completion screen.
Wireless setup is now complete
Step 10
Follow any on-screen instructions to
proceed with the remaining software
installation.