Canon imageRunner 60 User manual

o
o
o
o
~! L.o)T-:1)I/~1:::'7;f1J)c5~J(~:J::JIc:tutgQnnlC:,
~g;MJlo)CD~ROMb\S~71'?I7~-{::JA 1'-)IJL"'C<tc::
c!l, \0
STOP! Be sure to install the software from the enclosed
CD-ROM before connecting the video camcorder to your
computer with this cable.
STOP! Veillez ainstaller
Ie logiciel apartir du CD fourni avant de
brancher
Ie cable de connexion du camescope aI'ordinateur.
iATENCION! Asegurese de haber instalado el software que
contiane
el CD-ROM antes de conectar la videocamera al
ordenador con este cable.

PUBDIM-625
Canon Digital Video Camcorder
:I
Instruction Manual ! Englis~
Camescope video numerique I~~.::I
Manuel d'instruction ~~
Videocamara digital IC::. :II
Manual de Instrucciones ~an~~
£LU~A 70 /£LU~A 6S/£LU~A 60
Minil);'T Digital
Video
Cassette
rJ
BUBBLE JET
DIRECT DIRECT
PRim
t(
PictBridge
Please read also the following instruction
manuals.
Veuillez lire aussi les modes d'emploi
suivants.
Lea tambien los manuales de instrucciones
siguientes-
•Digital Video Software
•DV Network Software

Important Usage Instructions
WARNING:
J\
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT
TO RAIN OR MOISTURE.
WARNING:
J\
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT
WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of
copyright owners and be contrary to copyright laws.
Digital Video Camcorder, ELURA70/ELURA65/ELURA60 systems
This device complies With Part 15
of the fCC Rules Operation IS subject to the following two CDndl~lons (1)
rhis device may not cause harmful interference, and (2) this device must accept any Interference received,
including Interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for ctass Bdigitai device, pursuant to
Part 15 of the FC CRules These limits are deSigned to proVide reasonable protection against harmfu I
interference in aresidential Installation This
equipment generates, uses and can radiate radio frequency energy
and, if
not Installed and use ir) accordance With the instructions, cause harrnfullnterference to radio
communications. However, there IS no guararltee :hat Inte:ference not occur In a particular insta:lation If
thiS
equipment does cause harmful Interference to radiO or television reception, which can be determined by
turning the equipment off and on, the user IS encouraged to try to correct the interference by one or more of
the fo!lowlng measures
•Reorient or relocate
the receiving antenna
•Increase
the separation between the eqUlpmerlt and receiver
•
Connect the equipment into an outlet On a CirCUit different from that to which the receiver is connected.
•Consult
the dealer or an experienced radiorrV techniCian for help.
Use of shielded cable IS required to comply With class Blimits in Subpart B of Part 15 of FCC Rules
Do not make any changes or modifications to the equipment unless otherWise speCified In the manual.
If such changes
or modifications should be made, you could be reqUired to stop operation of the equipment
Canon USA Inc
One Canon Pl2za,
[ake S,J(cess, NY 11042, USA
Tel No. [phone]
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
2
Important Warning
1-1f.11ij['I~-1
nlSK OF ELECTRIC SHOCK
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO
NOT REMOVE COVER (OR
BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
lhe lightning flaSh With arrowhead
syrnbo:, With';) an eqUilateral tnang!e,
IS
Intendcd to alert the Lser to the presence
of uninsLlated "dangerous vdtage" w:thlrl
t:lE' product's enclosure, that may be of
suffiCient magnitude to constllute arisk of
eiectrlc shock to persons
The
exclamator pOint, within an
equlla;eral tr:angie, IS Intended to alert ',he
user
to the presence of importa:lt
operating and maintenance (serVicing)
instructions In the literature accompanYing
the product.

In these safety Instructions the word "product"
10. Power Sources -The CA-570 Compact
~
refers to the Canon Digital Video Camcorder Power Adapter should be operated only
ELURA70/ELURA65/ELURA60 Aand
all its from the type
of power source indicated on
accessories. the marking label. If you
are not sure of the
Read Instructions -All the safety and type
of power supply to your home, consult
1your product dealer or local power
operating Instructions should
be read
company. Regarding other power sources
before the product
is operated.
such as battery power, refer to instructions
2.
Retain Instructions - The safety and
in this manual
operating instructions should
be retained 11. Polarization -The CA-570 Compact Power
for future reference Adapter
is equipped with apolarized 2- -
3
Heed Warnings -All warnings on the prong plug
(a plug having one blade wider
~
product and In the operating Instructions than the other).
(3
should be adhered to. The 2-prong polarized plug will
fit into the
a.
power outlet only one way. ThiS IS asafety
~
4Follow Instructions -All operating and feature. If you
are unable to Insert the plug
o'
maintenance instructions should be
fully into the outlet, try reversing the plug.
::::l
followed. If the plug still falls
to fit contact your
5Cleaning -Unplug this product from the eiectriCian
to replace your obsolete outlet
Do not defeat the safety purpose of the
wall outlet before cleaning Do not
use
polarized plug.
liqUid or aerosol cleaners
The product
should
be cleaned only as recommended in
12 Power Cord Protection -Power cords
thiS manual. should
be routed so that they are not likely
6. Accessories -
Do not use accessories not to
be walked on or pinched by items placed
upon
or against them. Pay particular
recommended
In this manual as they may attention to plugs and the pOint from
be hazardous which the cords
eXit the product
7.
Avoid magnetic or electric fields - Do not
13. Outdoor Antenna Grounding
~- If an
use the camera close to TV transmitters, outside antenna
is connected to the
portable communication devices or other product,
be sure the antenna is grounded
sources
of electric or magnetic radiation.
so as to provide some protection against
They may
cause picture Interference, or voltage surges and
bUllt~up static charges
permanently damage the camera Section 810
of the National Electrical Code,
8.
Water and Moisture -Hazard of electric
ANSI I NFPA No. 70-1984, provides
shock -
Do not use this product near information With respect to proper
water or
in rainy/moist Situations. grounding
of the mast and supporting
structure, grounding
of the lead-In wire to
9
PlaCing Or Moving - Do not place on an
an antenna discharge unit, size of
unstable cart, stand, tripod, bracket or grounding conductors, location
of antenna
table. The product may fall, causing serious discharge unit, connection to grounding
injury to achild
or adult, and serious electrodes, and requirements
for the
damage to the product @grounding electrode.
See figure 1.
Aproduct and cart
combination should
be
moved with care. Quick
stops,
excessive force, and
uneven surfaces may
cause the product and cart combination to
overturn.
3

4
18. Damage Requiring
Service -Disconnect
Fig. 1this product from the wall outlet
and all
~
power sources Including battery, and refer
~::~b
servicing to qualified service personnel
under the following conditions:
I~- .~
a. When the power-supply cord or plug is
damaged
L ______ ~=J:J '_";::;;~:;::"
b. If any liquid has been spilled onto, or
objects
have fallen into, the product
c. If the product has been exposed to rain
,,------ ~~7~1~ :~:'~~'~~lr~~Vr,(
or water.
d. If the product does not operate normally
14. Lightning -
For added proteCtiorl of this
even if you follow the operating
instructions.
AdJ ust on Iy those controls
product during alightning storm, or when that
are covered by the operation
It
is left unattended and unused for long instructions. Improper adjustment of
periods
of time, disconnect It from the wall other controls
may result In damage and
outlet and disconnect the antenna
This will will often require extensive work
by a
prevent damage to the product due to qualified technician to restore the
lightning
and power-line surges.
product to Its normal operation.
15. Overloading -
Do not overload wall outlets
e. If the product has been dropped or the
and extension cords as this can result In acabinet
has been damaged.
risk of fi re or electric shock.
f. When the product exhibits adistinct
16. Objects and Liquid
Entry - Never push
change in performance This indicates a
objects of
any kind into this product
need for service.
through openings as they may touch 19. Replacement
Parts -When replacement
dangerous voltage points or short out parts parts
are required, be sure the service
that could result In afire or electriC shock
technician has used replacement parts that
Be careful not to splil liqUid of any kind
are specified by Canon or that have the
onto the product.
same charactenstics as the onginal part
17.
SerVicing --- Do not attempt to service thiS
Unauthorized substitutions may result in
product yourself as opening or removing fire, electric shock or other
hazards
covers may expose you to dangerous 20 Safety Check -Upon completion of
any
voltage or other hazards Refer all serv;cing
service or repairs to this product, ask the
to qualified
service personnel
service techniCian to perform safety checks
to determine that the product is in safe
operating order.
When replacement of power supply is required, please return it to the
responsible nearest Canon Service Center and please replace it With the same
type number CA-570.
The
Adapter can be used with a power supply between 100 and 240 VAC.
For areas where 120 VAC power is not used, you will need aspecial plug
adapter.
Contact your nearest Canon Service Center for further information.
Use only CSAlUL Certified power supply cord set, Polarized, Type SPT-2 or
heavier, minimum No. 18 AWG copper, rated 125 or 250 V, minimum ,P A,
minimum 6 ft (1.8 m), maximum 10ft (3 m) long.

Using this Manual
Thank you for purchasing the Canon ELURA70/ELURA6S/ELURA60. Please read this
manual carefully before you
use the camcorder and retain it for future reference.
Change
the display language before you begin (CO 76).
,S,.~.:w .. :blg:,I.~.;t .. a.,g:,d:,,:tR,~,.f,:~.,.,:eIDI"e:~,.""U'I~·:e,·dtJ1i·,·g··:tI.b.i::5··:···~:g·:g1u;Q,:I: ... p
o0 : Precautions related to the camcorder operation.
o • :Additional topics that complement the basic operating procedures.
o [IJ : Reference page number.
o Capital letters are used to refer to buttons on the camcorder or the wireless controller.
o [] are used to refer to menu items displayed on the screen.
o JJScreenJJ refers to the LCD and the viewfinder screen.
o Please note that the illustrations mainly refer to the ELURA70 (illustrations of the battery
pack show the NB-2LH supplied with the ELURA65 and ELURA60).
Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when
you have replaced
the backup battery.
SettIog Jbe Iime.ZQneJDayligbtSavingTime
Operating modes (see below) -------;.-( ... _1 )
Menu item and its default setting" II ( ~J5~:;' I SYSTEM 1~IT.ZONE/OsT"'N.y. I)
"~<h'M"Ub""o""'o .. ".,,_". 1 ~ I.",
Button and switches to be operated u
2Turn the SET dIal to select [SYSTEM] and press the Il;l!!
SETd,aJ ItJA ;;§
3Turn the SET dIal to select ["[ZONE/OST] and press ~~Nl ~ ~
Operating Mode POWER Switch
TAPE/CARD Switch
CAMERA CAMERA
~ (TAPE)
PLAY (VCR) PLAY
(VCR) ~ (TAPE)
CARD CAMERA CAMERA
CQ (CARD)
CARD PLAY PLAY
(VCR) CQ(CARD)
-
5"'
,-to
a
c.
c:
~
o·
::s
:Function can be used in this mode.
:Function cannot be used in this mode.
Trademark
Acknowledgements
• Canon and Bubble Jet are registered trademarks of Canon Inc.
• Mirll~"" is a trademark.
• SjII is a trademark. ~,
• Windows® is either a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
• Macintosh and Mac as are trademarks of Apple Computer, Inc., registered in the United States and
other countries.
• Other names and products not mentioned above may be registered trademarks or trademarks of their
respective companies.
5

6
Table of Contents
Introduction
Important Usage Instructions 2
Important Safety Instructions 3
Using this Manual 5
Checking Supplied Accessories 8
Components Guide 9
Basic Functions
Preparations
Preparing the Power Supply 13
Loading/Unloading aCassette 16
Installing the Backup Battery 17
Preparing the Camcorder 18
Using the Wireless Controller 20
Setting the Time Zone, Date and Time 21
Recording
Recording Movies on aTape .24
Zooming
29
Tips for Making Better Videos 31
Playback
Playing Back aTape .32
Adjusting the Volume 34
Playing
Back on a TV Screen 35
Advanced Functions
Menus and Settings 38
Recording
Using the Recording Programs .45
Using the Night Modes .48
Skin Detail Function 50
Adjusting Exposure Manually 51
Adjusting the Focus Manually .52
Setting the White Balance 54
Setting the Shutter Speed 56
Using the Self-Timer 58
Changing the Recording Mode (SP/LP) 59
Audio Recording 60
Using Digital Effects
62
Playback
Magnifying the Image 69
Displaying the Data Code 70
End Search 72
Returning to aPre-marked Position 73
Date Search 74
Other Functions
Customizing the Camcorder 75

Changing the Display Language 76
Changing the Remote Sensor Mode 77
Other Camcorder Settings 78
hUfi.fitMiik'M Using the VFL-1 Video Flash Light (Optional) 80
Editing
Recording to a VCR or Digital Video Device 82
Recording from Analog Video Devices (VCR, TV or Camcorder) 84
Recording
from Digital Video Devices (DV Dubbing) 85
Converting Analog Signals into Digital Signals (Analog-Digital Converter) 86
Audio Dubbing 88
Connecting to aComputer Using aDV (lEEE1394) Cable 91
Using a Memory Card
Inserting and Removing aMemory Card 92
Selecting the Image Quality/Size 93
File Numbers 95
Recording Still Images on a Memory Card 96
Reviewing aStill Image Right after Recording 100
Recording Motion JPEG Movies on a Memory Card 101
Selecting the Focusi ng Point 103
Selecting the Drive Mode 104
Recording Panoramic Images (Stitch Assist Mode)
106
Playing Back a Memory Card :108
Protecting Images
111
Erasi ng Images 112
Combining Images (Card Mix) 113
Formatting a Memory Card 117
Creating aStart-up Image 118
Direct Printing
Printing Still Images 119
Selecting the Print Settings 122
Trimming Settings 127
Printing with Print Order Settings 128
Transferring Images
Connecting to aComputer Using a USB Cable 130
Direct Transfer !Windows OS Onlyl 131
Selecting Images for Transfer (Transfer Order) 134
Additional Information
About the NE1WORK Mode 135
Screen Displays 136
List of Messages 139
Maintenance/Others 142
Troubleshooting 148
System Diagram 151
Optional Accessories 152
Specifications 155
Item Codes 157
Index 158
-
7

Checking Supplied Accessories
Battery CR1616
Lithium Button
DIGITAL VIDEO
SOLUTION DISK
For Windows
For Macintosh
I SS~900 Shoulder Strap
BP-2L 14 Battery Pack NB-2LH Battery Pack
e¢
CA-570 Compact
·1' Power Adapter
,(inc!. power cord)
:'
.1
Two AA (R6) Batteries I· Lens Cap and Lens
Cap Cord
r--------I~
STV-250N Stereo . IIFC~'OOPCU USB Cable SDC-8M SD Memory
Video Cable Card (containing
---If. I~ samp~;
G!&J
I
WA~34 Wide
Attachment
'L~_~'
The serial number of this product can be found at the battery attachment unit of
the camcorder. Write down the number and other information here and retain this
book
as apermanent record of your purchase to aid identification in case of theft.
Date of Purchase: Model Name: ELURA70/ELURA6S/ELURA60 A
Purchased From: Serial No.:
Dealer Address:
Dealer Phone No.:
8

Components Guide
-
Card access indicator (J:D96)
Serial number
Memory card slot (J:D92)
Backup battery
compartment (J:D17)
........ SET dial (J:D38)
OPEN
button (J:D 24)
LCD screen (J:D24) .. ~.~\
\\
\\
REC SEARCH + button (J:D28) / -----
~ (fast forward) button (J:D32) / \
CARD + button (J:D108) II jr------ FOCUS button (J:D52) /
I ~/II (play/pause) button (J:D32)
REC SEARCH - button (J:D28) / ~\. \I
(9 (record review) button (J:D28) / \Z@ RECSEARCH \ FOCUS INIGHTMODE 1
:~:~~;;:~~ts?32)/~~.' .. A ... ~.L ..... E .•.. ~.'~;".'~.!.~ ........•. !~~ ..•............. ~ .... ~ .... '.,.';fii-II=- :x~~~!:!;~~~2~[IJ48)1
button (lJJ62) I "'''''~(3 (]J ~ END END SEARCH button (CIJ72)
~~~~,:~~:::~:!::~;:)-/--r-ooifl~~;~I---- :::V:A~I:E:U:::::::4) I
DATA CODE button (lJJ70) cQ (stitch assist) button (J:D106) /
SLIDE SHOW button (J:D109) /
9

10
Dioptric adjustment
lever ([lJ 18)
Viewfinder protect
cover ([lJ 143)
Viewfinder ([lJ 18)
Strap
mount ([lJ 19)
Start/stop
button
([lJ24,101)
Power switch ([lJ 5, 135) ..!
CAMERA
OFF
PLAY(VCR)
NETWORK
-ELU~A 70/£LU~A65
Advanced Accessory shoe ([lJ 80, 154)
G!BDAccessory shoe ([lJ 153)
~IoN"{print/share) button ([lJ 120,131)
PHOTO button ([lJ 96)
Zoom lever ([lJ 29)
Cassette
compartment
([lJ 16)
...... .......-~\;._ ~ ~ _- OPEN/EJECT ~ switch
([lJ 16)
Cassette
compartment
cover ([lJ 16)

Terminal cover
MIC
terminal* (1II61, 88) __ ~
I MIC
~i~~~~1)~i~f~~( ···············1;:
USB terminal (III 119, 130) ~~l5CHARGE
//l/@DC
CHARGE indicator (1II13) _// //
DC IN terminal (1II13) . //
*ELURA70/ELURA65 only.
Assist lamp (White LED)*
( III 48)
Remote sensor (III 20)
Stereo
microphone (III88) -
11

CD····················································· ,
12
CD Zoom buttons (CIl29)
@Select buttons (CIl 38)
@PHOTO button (CIl96)
G) START/STOP button (CIl24, 101)
® ~ SELF T. button (CIl58)
® D. EFFECTS button, ON/OFF button (CIl62)
(j) TV SCREEN button (CIl136)
®DATA CODE button (CIl70)
®DATE SEARCH ~ .... /~~ buttons (CIl74)
®ZERO SET MEMORY button (CIl 73)
QJ) 12bit AUDIO OUT button (CIl90)
©AUDIO DUB. button (CIl89)
Q) REC PAUSE button (CIl84)
QJ AV -+ DV button (CIl87)
@REMOTE SET button (CIl77)
@Transmitter
@MENU button (CIl38)
@SET button (CIl38)
@CARD -/+ buttons (CIl108)
@SLIDE SHOW button (CIl109)
@REW .... button (CIl32)
@PLAY ~ button (CIl32)
@FF ~ button (CIl32)
@ -/- ... 11 button (CIl33)
@ STOP. button (CIl32)
@ +/II~ button (CIl33)
@PAUSE .. button (CIl33)
@SLOW I~ button (CIl33)
@ x2 button (CIl33)

Preparing the Power Supply
-
CHARGE
indicator
1. Connect the power cord to the
adapter.
2. Plug the power cord into apower
outlet.
3. Connect the power adapter to the
camcorder's
DC IN terminal.
The CHARGE indicator starts flashing. It
glows steadily when charging is complete.
4. When charging is complete,
disconnect the
power adapter from
the camcorder. Unplug the power
cord from the power outlet and
disconnect it from the adapter.
5. Remove the battery pack after use.
Press the BATIERY RELEASE button to remove the battery.
1. Turn the POWER switch to OFF.
2. M'ove the viewfinder upward.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the battery
pack.
• Press lightly and slide it in the direction of
the arrow until it clicks.
13

The LCD screen's backlight is brighter when the camcorder is powered from a
household power source.
1. Turn the POWER switch to OFF.
2. Connect the power cord to the
power adapter.
3. Plug the power cord into apower
outlet.
4. Connect the power adapter to the
camcorder's
DC IN terminal.
~
~~
:;
.0 .......•.•...•.•.•....•.•.••.•.•• p~y~RI
.......... • N£TVIOfIK,
e-;;\
14
oTurn off the camcorder before connecting or disconnecting the power adapter.
oIf the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.
oDo not connect any products that are not expressly recommended to the
camcorder's DC IN terminal or to the power adapter.
oYou may hear some noise from the power adapter during use. This is not a
malfunction.
oDo not disconnect and reconnect the power cord while charging abattery
pack. Charging may stop. The battery pack may
not be charged correctly even
if
the CHARGE indicator glows steady. The battery pack may also not be
charged correctly
when a power outage occurs during charging. Remove the
battery pack and attach it back to the camcorder.
o When the power adapter or battery pack is defective, the CHARGE indicator
flashes rapidly (at
about 2flashes/second) and charging stops.
oThe CHARGE indicator informs you about the charge status.
0-500/0: Flashes once every second
More than 50
0
/0: Flashes twice every second
100
0
/0: Glows steadily

o Charging, Recording and Playback Times
Below times are approximate and vary according to the charging, recording or
playback conditions.
BP-2l14 NB-2lH
NB~2l
BP-2l12
Charging Time 210 min.
115min.
110 min. 180 min.
Max. Recording Viewfinder 240 min. 115 min.
95 min. 200 min.
Time
LCD
190 min.
90min.
75 min. 150 min.
Typical Recording
Viewfinder 135 min. 65 min. 50 min. 110 min.
Time*
LCD 105 min.
50 min. 40 min.
85 min.
Playback Time 220 min. 105 min.
85 min. 175 min.
* ApprOXImate times for recording with repeated operations such as start/stop, zooming,
power on/off. Actual time
may be shorter.
oWe recommend charging the battery pack in temperatures between 50 of and
86
'F (10 'C and 30 O(). Outside the temperature range of 32 of to 104 of (0 Q(
to 40°C), the CHARGE indicator flashes rapidly and charging stops.
oAlithium ion battery pack can be charged at any charge state. Unlike
conventional battery packs, you do
not need to completely use or discharge it
before charging.
oWe recommend that you prepare battery packs 2 to 3times longer than you
think you might need.
o To conserve battery charge, turn off the camcorder instead of leaving it in
record pause mode. -
15

I.oading/Unloading a Cassette
Use only videocassettes marked with the Mini~"T logo.
1. Slide and hold the OPEN/EJECT
switch and open the cassette
compartment cover.
The cassette compartment opens
automatically.
2. Load/unload the cassette.
• Load the cassette with the window facing
the g
ri pbelt.
• Unload the cassette by pulling it straight
out.
3. Press the ~ mark on the cassette
compartment until
it clicks.
4. Wait for the cassette compartment to
retract automatically and close the
cassette compartment cover.
16
oDo not interfere with the cassette compartment while it is opening or closing
automatically,
or attempt to close the cover before the cassette compartment
has fully retracted.
o Be careful not to get your fingers caught in the cassette compartment cover.
If the camcorder
is connected to a power source, cassettes can be loaded/
unloaded even
if the POWER switch is set to OFF.

Installing the Backup Battery
The backup battery allows the camcorder to retain date, time (OJ 21) and other
camcorder settings while the power source is disconnected. Connect apower source to
the camcorder when replacing the backup battery to retain the settings.
-
1. Press the OPEN button to open the
LCD panel.
2. Pull out the battery holder.
3. Place the lithium battery with the
+side facing downward into the
battery holder.
4. Insert the battery holder.
5. Close the LCD panel.
WARNING!
• The battery used in this device may present afire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 212 of (100°C) or
incinerate the battery.
• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or
explosion.
o Do not pick up the battery using tweezers or other metal tools as this will
cause ashort circuit.
oWipe the battery with aclean dry cloth to ensure proper contact.
oKeep the battery out of reach of children. If it is swallowed, seek medical
assistance immediately. The battery
case may break and the battery fluids may
damage stomach and intestines.
o Do not disassemble, heat or immerse the battery in water to avoid the risk of
explosion.
fI
The backup battery has alife span of about a year. ~ flashes in red to inform
~
you that it needs to be replaced.
17

Preparing the Camcorder
Ad.jrU.5;ti.gg .. t .... ;tib.e .. ~.i~~;f .. i ... g.;di~.ti.;'C .. i.gg;t .. t:i.t.Ad; .. U .. 5.;t.Wtegt}! .. ;
1. Turn on the camcorder and keep
the
LCD panel closed.
2. Pull out the viewfinder.
3. Adjust the dioptric adjustment
lever.
18
1. Attach the cord to the lens cap.
2. Pass the grip belt through the loop
on the cord.
Press the buttons on the lens cap when
attaching/removing it. Hook the
lens cap on
the grip belt while you
are recording, and
place it over the
lens when you have
finished.
Hold the camcorder with your right
hand and adjust the belt
with your
left
..
Adjust the grip belt so that you can reach the
zoom lever with your index finger, and the
start/stop button
with your thumb.

Pass the ends through the strap mount and adjust the length of the strap.
55-900
Shoulder strap
,li!~il:ti~'n\~rgU;g;ti.g,g;tb'~iif1Qliiili~Atta,:b.w;egt'
The WA-34 Wide Attachment gives you a wide perspective for indoor shots or
panoramic views (O.7x). The wide attachment is for use at maximum wide-angle. -
Screw the wide attachment fully into
the
lens filter thread.
o Do not look directly at the sun or other strong light sources through the wide
attachment. It could damage your eyesight.
oIf you zoom to telephoto, the picture will not be in focus.
oIf dust accumulates on the wide attachment or on the camcorder lens, clean
both
lenses gently with ablower brush.
o Do not touch the lens to avoid smudges and fingerprints.
o Do not store the wide attachment in ahumid place as it may mold.
II 0The wide attachment may obstruct the remote sensor (the range
of the
~
wireless controller narrows), or may cause ashadow to appear on the picture
when recording
with flash, video light or the assist lamp (White LED).
oFilters cannot be used with the wide attachment.
19