Canon Speedlite 600EX-RT Manual

Canon EXRT 600 Speedlite
set up

Canon 600EX RT flash unit
Canon remote
ST-E3-RT

Canon
600 RT
Radio based Wireless
multiple flash system.
Canon Radio transmitter works up to 30 meters
or 100 feet.
Transmits through walls, people and bright sun,
and in 360 degrees radius.
Connect up to 15 flash
in groups in ratios
A, B or A,B, C.
Zoom flash capability 20-200mm range
focus assist!
Color Correction filter holder
with self recognition and correction
in AWB.

•SET UP

Custom Set up from LCD
Display
•Place Transmitter or flash in hot shoe, turn on
•1st Go to Menu1
•2nd Choose External Speedlite Control
•Press> Flash Function Setting
•Press> Set up All settings from here
•Set it up there then register over to My Menu

•ID number #
Must be Unique
and set to all units.
Once you set it you are set
for good.
Setting will persist even if the
batteries
are removed.

Channels: 1-15
In Radio you can set up to 15 flash units to flash
In Infrared you can set us as many as you like.

•Method of Connection or Wireless link
•Master and Slave.
•Radio transmit or Infrared/ line of site.
Master is Green and Slave is Amber

The Canon EXRT 600 Flash unites and the STE3 can be set to
Radio or Infrared.
The Canon EX 580 Flashes and all earlier ETTL models can be triggered
using either the EXRT 600 flash units or the STE3 Transmitter,
however, earlier triggers such as the STE-2 can not fire the radio models.

Mode of operation
5 modes
GR M, ETTL,Multi

5 zones
A B C D E
Press Group Menu button
scroll down to get to additional
modes.
*Each zone can be set to any
mode of operation or turned on
or off from the Master.
*You may use either the STE3 Transmitter
or another Canon EXRT 600 as a master.

•High Speed Shutter Sync
Under LCD PANEL
look for the 4 similar white buttons
1,2,3,4
Flip from menu/page 3 for infrared and
menu 4 for Radio
must be in
Connection method
Master.
Press
Sync to get to High Shutter sync.

Hi Speed Shutter Sync can be set and left in place.
The Flash power drops off significantly when higher
shutter speeds are used.
The camera’s flash sync speed will not be effected.

Menu 4 in Master Mode or Menu 3 in
Slave Mode
Press Memory
that will take you to
Save and Load
The first time you set it press,
Save
If you need to reset for any reason
Press Load
Once you set the master unit then you
have to set the slave

In Gr mode,we set up the Master unit,
you will notice on page 1 or menu 1 you
will see Gr.
!
Press GR and it will light up.!
Press the set button and
the power slider will light up
enabling you to use the dial
for plus or minus in 1/3 increments.
Save to memory and assign to each slave.

•Power settings can all be set up and down in concert.
•Press menu1
•Press +/-

REL
Remote Release Option
Menu 2
Use the Canon EXRT 600 as a transceiver
to fire a camera remotely.
1.The master unit must be on the camera
you wish to shoot with.
2.To trigger the camera, the firing flash should be set
up and positioned off camera.
3. Option, the master transceiver on the camera flash can be set to
not fire or use the STE3 Remote to receive the signal.

18 Custom Functions:
Set them once and rarely change

We are going to set 8
Set the rest to default.

•00-Distance set to 1.
•01- Auto Power off, keeps unit from turning itself off. Also set Camera so it does not go to sleep.
•04-Set to 1. Flash exposure bracketing. Set to darker, medium and lighter.