Canon PowerShot ELPH 520 HS User manual

Camera User Guide
ENGLISH
• Before use, be sure to read this guide, including the
safety precautions.
• This guide will familiarize you with how to use the camera
correctly.
• Keep the guide handy for future reference.

2
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera dealer.
•A memory card is not included (p. 3).
For information about the included software, refer to the ImageBrowser EX
User Guide, in PDF format (p. 26).
Package Contents
PDF Manuals
•Adobe Reader is required to view the PDF manuals.
Camera Battery Pack NB-9L
(with terminal cover)
Battery Charger
CB-2LB/2LBE
Interface Cable
IFC-400PCU
Wrist Strap
WS-DC11
Warranty CardGetting Started DIGITAL CAMERA
Solution Disk

3
The following memory cards (sold separately) can be used, regardless of
capacity.
•microSD memory cards*
•microSDHC memory cards*
•microSDXC memory cards*
* Conforms to SD specifications. However, not all memory cards have been verified to work
with the camera.
•Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
•Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
•The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
•Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet design
specifications, in rare cases some pixels may be defective or may appear
as red or black dots. This does not indicate camera damage or affect
recorded images.
•The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
•When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Compatible Memory Cards
•Always confirm beforehand that memory cards are supported on other devices
such as card readers and computers (including the current version of your
operating system).
Preliminary Notes and Legal
Information

4
•: Important information you should know
•: Notes and tips for expert camera use
•(p. xx): Pages with related information (in this example, “xx” represents a
page number)
•Instructions in this guide apply to the camera under default settings.
•For convenience, all supported memory cards are simply referred to as
“the memory card”.
•The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
: Indicates that the function is used when shooting or
viewing still images.
: Indicates that the function is used when shooting or
viewing movies.
Part Names and Conventions in This
Guide
Lens
Zoom lever
Shooting: i(telephoto) / j(wide
angle)
Playback: k(magnify) / g(index)
Shutter button
Indicator
Power button
Mode switch
1(Playback) button
Lamp
Flash
Microphone
Speaker
Still Images
Movies

Part Names and Conventions in This Guide
5
•In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
•The following camera buttons are represented by icons.
oUp button on back
qLeft button on back
rRight button on back
pDown button on back
mFUNC./SET button on back
•On-screen text is indicated in brackets.
Battery cover
DC coupler terminal cover
Tripod socket
Screen (LCD monitor)
Memory card cover
Strap mount
HDMITM terminal
AV OUT (Audio/video output) /
DIGITAL terminal
Movie button
b(Exposure compensation) / Up button
e(Macro) / Left button
h(Flash) / Right button
l(Display) / Down button
FUNC /SET button
nbutton

Contents
7
8 Appendix.........................193
Troubleshooting ............................ 194
Handling Precautions.................... 197
On-Screen Messages.................... 198
On-Screen Information .................. 200
Functions and Menu Tables .......... 204
Index.............................................. 212

8
4Shoot
zUse camera-determined settings (Auto Mode) ............................. 44
zFocus on faces ............................................................... 44, 80, 115
zWithout using the flash (Flash Off) ............................................... 56
zWith myself in the shot (Self-Timer)........................................ 54, 96
zAdd the shooting date and time (Date Stamp).............................. 57
zUse Face ID.......................................................................... 59, 127
zMovie clips and photos together (Movie Digest)........................... 93
Contents: Basic Operations
Monochrome
(p. 89)
IP
Against Snow
(p. 81)
Portraits
(p. 80)
Shooting people well
Matching specific scenes S
Applying special effects
Low Light
(p. 81)
Under Water
(p. 81)
Miniature Effect
(p. 86)
Toy Camera Effect
(p. 87)
Night Scenes
(p. 80)
Vivid Colors
(p. 84)
Poster Effect
(p. 84)
Smooth Skin
(p. 83)
Soft Focus
(p. 88)
Fish-Eye Effect
(p. 85)
t
Fireworks
(p. 81)

Contents Basic Operations
9
1View
zView images (Playback Mode) ................................................... 126
zAutomatic playback (Slideshow)................................................. 136
zOn a TV ...................................................................................... 175
zOn a computer.............................................................................. 27
zBrowse through images quickly.................................................. 130
zErase images.............................................................................. 143
EShoot/View Movies
zShoot movies........................................................................ 44, 101
zView movies ............................................................................... 126
zFast-moving subjects, slow-motion playback ............................. 101
cPrint
zPrint pictures............................................................................... 180
Save
zSave images to a computer.......................................................... 27

10
•Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
•The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
•Be sure to also check the guides included with any separately sold accessories you
use.
Safety Precautions
Warning Denotes the possibility of serious injury or death.
•Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
•Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
•Use only recommended power sources.
•Do not attempt to disassemble, alter or apply heat to the product.
•Avoid dropping or subjecting the product to severe impacts.
•To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
•Stop using the product immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
•Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
•Do not let the product come into contact with water (e.g. sea water) or other
liquids.
•Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or a Canon Customer Support Help Desk.
•Use only the recommended battery.
•Do not place the battery near or in direct flame.
•Unplug the power cord periodically, and using a dry cloth, wipe away any dust
and dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
•Do not handle the power cord with wet hands.
•Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
•Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.

Safety Precautions
11
•Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
•Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on an audio CD player (music player). Additionally, this could damage
the speakers.
Caution Denotes the possibility of injury.
•When holding the camera by the strap, be careful not to bang it, subject it to
strong impacts or shocks, or let it get caught on other objects.
•Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
•Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
•When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
•Avoid using, placing or storing the product in the following places
-Places subject to strong sunlight
-Places subject to temperatures above 40 °C (104 °F)
-Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
•Viewing images on the camera screen for prolonged periods may cause
discomfort.
Caution Denotes the possibility of damage to the equipment.
•Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
•When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.

Safety Precautions
12
•In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
•Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
•Before you discard the battery, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
•Unplug the battery charger from the power outlet after charging is complete, or
when you are not using it.
•Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
•Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
damage.
•Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
•When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
•Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.

13
Prepare for shooting as follows.
zThread the end of the strap through the strap
hole ( ), and then pull the other end of the
strap through the loop on the threaded end
().
zPlace the strap around your wrist.
zWhen shooting, keep your arms close to your
body and hold the camera securely to
prevent it from moving. Do not rest your
fingers on the flash.
Initial Preparations
Attaching the Strap
Holding the Camera

Initial Preparations
14
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
zAfter aligning the Smarks on the battery and
charger, insert the battery by pushing it in
( ) and down ( ).
Charge the battery.
zFor CB-2LB: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
zFor CB-2LBE: Plug the power cord into the
charger, then plug the other end into a power
outlet.
XThe charging lamp turns orange and
charging begins.
XWhen the charging is finished, the lamp turns
green.
Remove the battery.
zAfter unplugging the battery charger, remove
the battery by pushing it in ( ) and up ( ).
Charging the Battery
CB-2LB
CB-2LBE

Initial Preparations
15
Insert the included battery.
Open the cover.
zSlide the cover ( ) and open it ( ).
Insert the battery.
zWhile pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.
zBatteries inserted facing the wrong way
cannot be locked into the correct position.
Always confirm that the battery is facing the
right way and locks when inserted.
Close the cover.
zLower the cover ( ) and hold it down as you
slide it until it clicks into the closed position
().
•To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
•For battery chargers that use a power cord, do not attach the charger
to other objects. Make sure that it can always move freely.
•For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Specifications” in the Getting Started
guide.
Inserting the Battery
Terminals Battery Lock

Initial Preparations
16
Insert a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted in
another device), you should format the memory card with this camera
(p. 164).
Open the cover.
zSlide the cover ( ) and open it ( ).
Insert the memory card.
zInsert the memory card facing as shown until
it clicks into the locked position.
zMake sure the memory card is facing the right
way when you insert it. Inserting memory
cards facing the wrong way may damage the
camera.
Close the cover.
zLower the cover ( ) and hold it down as you
slide it until it clicks into the closed position
().
zOpen the cover and press the battery lock in
the direction of the arrow.
XThe battery will pop up.
Inserting the Memory Card
Removing the Battery

Initial Preparations
17
zOpen the cover and push the memory card in
until it clicks, and then slowly release the
memory card.
XThe memory card will pop up.
A screen for setting the date and time is displayed the first time you turn the
camera on. Be sure to specify the date and time, which is the basis for dates
and times added to your images.
Turn the camera on.
zPress the power button.
XThe [Date/Time] screen is displayed.
Set the date and time.
zPress the qr buttons to choose an option.
zPress the op buttons to specify the date
and time.
zWhen finished, press the mbutton.
Removing the Memory Card
Setting the Date and Time

Initial Preparations
18
Set the local time zone.
zPress the qr buttons to choose your local
time zone.
Finish the setup process.
zPress the mbutton when finished. After a
confirmation message, the setting screen is
no longer displayed.
zTo turn off the camera, press the power
button.
•Unless you set the date, time, and local time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
•To set daylight saving time (1 hour ahead), choose in step 2 and then
choose by pressing the op buttons.

Initial Preparations
19
Adjust the date and time as follows.
Access the camera menu.
zPress the nbutton.
Choose [Date/Time].
zMove the zoom lever to choose the 3tab.
zPress the op buttons to choose [Date/
Time], and then press the mbutton.
Change the date and time.
zFollow step 2 on p. 17 to adjust the settings.
zPress the nbutton to close the menu.
Changing the Date and Time
•Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
•The date/time battery will be charged in about 4 hours once you insert a charged
battery or connect the camera to an AC adapter kit (sold separately, p. 173),
even if the camera is left off.
•Once the date/time battery is depleted, the [Date/Time] screen will be displayed
when you turn the camera on. Follow the steps on p. 17 to set the date and time.

Initial Preparations
20
The display language can be changed as needed.
Enter Playback mode.
zPress the 1button.
Access the setting screen.
zPress and hold the mbutton, and then
immediately press the nbutton.
Set the display language.
zPress the opqr buttons to choose a
language, and then press the mbutton.
XOnce the display language has been set, the
setting screen is no longer displayed.
Display Language
• A clock icon is displayed if you wait too long in step 2 after pressing he m button
before you press the
n button. In this case, press the m button to dismiss
the clock icon and repeat step 2.
•You can also change the display language by pressing the nbutton and
choosing [Language ] on the 3tab.

21
Follow these instructions to turn the camera on, shoot still images or movies,
and then view them.
For fully automatic selection of the optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
Turn the camera on.
zPress the power button.
XThe startup screen is displayed.
Enter Amode.
zSet the mode switch to A.
zAim the camera at the subject. As the camera
determines the scene, it will make a slight
clicking noise.
XIcons representing the scene and image
stabilization mode are displayed in the upper
right of the screen.
XFrames displayed around any subjects that
are detected indicate that they are in focus.
Compose the shot.
zTo zoom in and enlarge the subject, move the
zoom lever toward i(telephoto), and to
zoom away from the subject, move it toward
j(wide angle).
Trying the Camera Out
Shooting (Smart Auto)
Still Images Movies