Canon POWERSHOT SD4500 IS User manual

CaHOH
IXUS 1000 HS
Camera User Guide
Make sure this guide, including the "Safety
Precautions" section before using the camera.
use it in the future.

Using Various Functions for
Shooting Movies
This chapter serves as a more advanced version of the "Shooting
Movies" and "Viewing Movies" sections in Chapter 1, and explains how
to use various functions for shooting and viewing movies.
This chapter assumes that the mode switch is set to '_
The latter half of the chapter explaining movie playback and editing
assumes that the F_ button has been pressed to enter Playback mode.
Shooting Movies in Modes Other than _,_,
When the mode switch is set to _), the camera can automatically select
al! settings so that you can shoot movies (p. 30).
You can shoot movies by pressing the movie button, however, certain
settings made in the FUNC. and Shooting menus will automatically change
to match settings for shooting movies.
When you finish shooting a movie, the settings will return to those before
the movie was shot.
97

..................................................Enter',_,mode.
Set the mode switch to _.
Adjust the settings according to
your purposes (pp. 98 - 103).
shoot.
Press the movie button.
To stop shooting the movie, press the
movie button again.
You can choose between five Movie modes.
Choose a Movie mode.
After pressing the @ button, press the
,A_, buttons or turn the dial to choose
'_, then press the @ bu'tion again.
Press the ,_'_ buttons or turn the _[_i!i_dial to
choose a mode, then press the @ button.
'_ Standard Normat mode.
_i" Miniature Effect You can shoot movies that look like a miniature model (p. 99).
2A"mColor Accent These Shooting modes let you change att colors except the
chosen color to black and white, or exchange the chosen color
for another color, when shooting. See "Changing the Color and
)_ Color Swap Shooting" (p. 92) for details. Choose the color you wish to leave
in or change before shooting the movie.
98

You can shoot fast moving subjects and play them back in slow motion. The
maximum clip length you can record is approximately 30 seconds !ong, which
will take approximately 4 minutes to play back in s_ow motion.
choose
Follow the steps for "Changing the Movie
Mode" on p. 98 to choose _,_.
Shoot.
Press the movie button,
To stop shooting the movie, press the
movie button again.
The movie will play back in slow motion when you following Steps I - 3 on p. 32,
You can use the included software to change the piayback speed of movies shot
in _'. Refer to the Software Guide for details.
You can shoot movies that look like moving miniature models.
You create the miniature model effect by choosing the upper and lower
portions of the scene that will be blurred and the playback speed, which
makes people and objects in the scene move quickly during playback.
Audio will not be recorded.
....choose
Follow the steps for "Changing the Movie
Mode" on p. 98 to choose _9.
99

Shoot Movies That Look Like aMiniature ModeJ tMiniature Effect)
A white frame (the area that will not be
blurred) appears on the screen.
Choosethe ,eatokeep foous.
Press the MENUbutton for more than one
second.
Move the zoom lever to change the frame
size, and press the ._v buttons to change
the frame position.
.... Choose a playback speed.
Press the @ button.
Press the 4 _ buttons or turn the _,_!i_ dia! to
choose a playback speed.
Pressing the MENU button restores the
settings screen.
Shoot.
Press the movie button.
To stop shooting the movie, press the
movie button again.
Playback Speeds and Estimated Playback Times (for 1 Min. CJips)
5X 12 sec.
10X 6 see.
20X 3 sec.
100

You can choose between four movie qualky settings.
Movie Quality Tabte
ili!ii!!
Choose the movie quality setting.
After pressing the _,_ button, press the
Av buttons or turn the ;i_i:_idial to choose
_, then press the @ button again.
Choose an option.
Press the .Av buttons or turn the _i_',dial to
choose an option, then press the _ button.
The option you set will appear on the screen.
1920 x 1080pixels, 24 frames/sec. For shooting futi high-definition movies.
i280 x 729 pixeisl 30 framedsecl For shooting high'definition rnoviesl
640 x 480 pixets, 30 frames/sec. For shooting standard quatity movies.
Since the number of recording pixetsis smatler than
[_ 320 x 240 pixets, 30 frames/sec, in _, the movie quality will appear coarse, but you
can record approximately three times the length.
Estimated Shooting Time
14 min. 34 sec. 59 min. 40 sec.
20 min. 43 sec. 1 hr. 24 min. 54 sec.
I hr. 58 rain. 19 sec. 8 hrs. 4 min. 30 sec.
Based on Canon's testing standards.
Recording will automatically stop when the clip fite size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in _-_ or _, and
approximately 1 hour when shooting in _ or _.
Recording may stop even if the maximum clip length has not been reached on some
memory' cards. SD Speed Class 6 or higher memory cards are recommended.
101

You can lock the exposure or change it in 1/3 steps within a range of -+2 before
shooting,
Focus.
Press the shutter button halfway to focus.
Lock the exposure.
After releasing the shutter button, press
the _ button to lock the exposure. The
exposure shift bar appears=
Press the _ button again to release the
tock=
Change the exposure.
WMle watching the screen, turn the _,;i_ dial
to adjust the exposure.
Shoot.
Press the movie button,
To stop shooting the movie, press the
movie button again,
102

The following functions can be used in the same way as for still images.
Functions marked with a * can be used in the same way as for still images
when in _ ,w ;_ ,_
Zooming in More CIosety On Subjects
- The optical and digital zooms (p, 57) are available in _,
- Only the opticaJ zoom is available in )_ and ,_.
- Neither the optical nor digital zooms are available while shooting in _'.
Be sure to set the optical zoom before shooting.
- The sound of the zoom will be recorded,
Using the Self=Timer (po60)*
Changing the Focusing Range (Macro/lnfinity) (p.73)
Neither macro nor infinity shooting are available m _".
Adjusting the White Balance (p.77}
Changing the Tone of an mmage(My Colors) (p.79)
Using the Self=Timer to Prevent Camera Shake (p.80)*
Customizing the Self-Timer (po81)
The number of shots cannot be changed•
Shooting Using a TV Monitor (po82)*
Shooting with the AF Lock (p.86)
Turning Offthe AF Assist Beam (p.147)*
Displaying the Overlay (p.149)*
[3:2 Guide] is not available.
Changing the IS-Mode Settings (p.150)*
You can switch between [Continuous] and [Off].
103

The following functions can be used in the same way as for still images.
Erasing _mages (p,29)
Quickly Searching images (p.108}
Viewing Images in Filtered Playback (p,109)
Viewing $Hdeshows (p,110)
Changing image Transitions (p,114)
Viewing images on a TV (p.115)
Viewing images on a High@efinition TV (p.116)
Protecting images (p.117}
Erasing _mages (p,120}
Tagging images as Favorites (p.122}
Organizing images by Category (My Category) (p,123)
Rotating Images (p.126)
Summary of Movie Control Pane[ in "Viewing Movies"
(p. 32)
Playback
speed. Sound wilt not play back.)
_ii PreviousframeiRew_nd_fyouho_downthe@button:i
_ Display the last frame
Edit (p. 105)
Z £ppears when connected io a PictBridge compiian{ printer ipl I34ii
Refer to the Personal Printing Guide for details.
104

You can trim the beginnings and ends of recorded mov[es.
Movie Editing Panel
Movie Editing Bar
ili!ii!!
Choose _.
Follow Steps 1 = 3 on p. 32 to choose _'_,
then press the _ button.
The movie editing panel and the movie
editing bar wi![ appear.
Set the editing range.
Press the _v buttons and choose _ or
Press the _ _ buttons or turn the :ii:_ dial to
move _. o_ w[[[ display at a point where
you can edit the movie. If you choose _,
you can trim the beginning of the movie
from ova. If you choose _, you can trim
the end of the movie from ok_.
Even if you move W to a point other than a
o_, only the portion from the nearest o_, to
the left wil! be trimmed when _ is chosen.
Only the portion from the nearest ok_ to the
right will be trimmed when _ is chosen.
The section indicated with _ wiI[ be the
section of the movie that remains after
editing.
105

Editing
Check the edited movie.
Press the ,_v buttons to choose
(Play), then press the @ button. The
edited movie will play.
To edit the movie again, repeat Step 2.
To cance! editing, press the ,_v buttons,
and choose _D. After pressing the @
button, press the 4_ buttons or turn the
@ dial to choose [OK], then press the @
button again,
Save the edited movie.
Press the Av buttons to choose P_, then
press the @ button.
Press the ,_ 4 _ buttons, or turn the _1/:__
dial to choose [New File], then press the @
button.
The movie will be saved as a new file.
106

Using Various Playback and
Editing Functions
This chapter explains various ways to play back and edit images.
Press the _ button to enter Playback mode before operating the camera.
107

Searching I_ages Using index #_splay
Displaying multiple images at the same time lets you quickly find the image
you want.
.........................................................................................................................................................................Move the zoom meyertoward _.
images will display in an index.
The number of images increases each
time you move the lever toward _.
The number of images decreases each
time you move the lever toward O..
Choose an image.
Turn the dial to switch images.
Press the .Av 4 _ buttons to choose an image.
An orange frame appears on the chosen image.
Press the @ button to display the chosen
image by itsetf.
Searching images Using the CentroJ D_aJ
Turning the control dia_ will display images in a _ine letting you quickly search
them. You can also jump by the shooting date (Scroll Display).
Choose an image.
If you set the camera to single image
playback and turn the '_ii:_dial quickly, the
images will display as shown on the left.
Turn the ,iiii_i_dial to choose an image.
Pressing the @ button restores single
image playback.
If you press the _v buttons during Scroll
Display, you can search images by the
shooting date.
108

When there are many images on the memory card, you can filter and display
them by a specified filter. You can also protect (p. 117) or delete (p. 120) all
images at once wMle filtered.
ili!ii!!
Choose t_.
After pressing the _,_ button, press the
,_" buttons or turn the _i:!; dial to choose
_T, then press the @ button again.
Choose a fHter.
Press the ,_'_ buttons or turn the (i_i: dial
to choose a filter, then press the @
button.
....viewthemteredmages.
Press the ,_'_ buttons or turn the i_;:_'!idial
to choose a filterforplayback, then press
the @ button (except for "k ).
Filtered playback starts and a yellow frame
appears.
If you press the _ _ buttons or turn the _J!ii:
dial, only the chosen target images will
display.
If you choose _ in Step 2, filtered
playback will be canceled.
Search filters
Favodies 5ispiays irnages iagged as favoriies ip: 122i
(_ Shot Date Disptays the images shot on a specified date
%, File Type Disptays onty stilt images or movies
Filters that do not have any corresponding images cannot be chosen. 109

Viewing $1ideshows
In filtered playback (Step 3), you can view filtered images with "Quickly Searching
Images" (p. 108), "Viewing Slideshows" (p. 110), and "Magnifying Images"
(p. 113). You can process all filtered images at once while performing operations
in "Protecting Images" (p. 117), "Erasing Images" (p. 120), or "Printing from the
Print List (DPOF)" (p. !37), by choosing all of the filtered images.
However, if you change the category (p. 123), or edit an image and save it as a
new image (p. !27), a message wilt appear, and filtered playback will cancel.
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
110
"::ii:!ii!_!iii_i
Choose @.
After pressing the @ button, press the
,_'_ buttons or turn the ,ii__dial to choose
@, then press the @ button again.
Choose a transition effect.
Press the ,_v buttons or turn the din!
to choose an effect, then press the@'-
button.
The slideshow will start a few seconds after
[Loading image...] appears.
In filtered playback (p. 109), only images
matching a filter play back.
You can pause/restart a slideshow by
pressing the @ button again.
Press the MENU button to stop the
sIideshow.

Viewing $tideshows
You can set a slideshow to repeat, or change transition effects and the time
that slideshow images are displayed. You can choose from six transition
effects when switching between images.
choose [SJideshow].
Press the M EN U button to choose
[Slideshow] from the [] tab, then press the
@ button.
Make the setting.
Press the ,_v buttons or turn the _i11['_dial
to choose an item, then press the 4_
buttons to adjust the setting.
If you choose [Start] and press the @
button, the slideshow starts with your
settings.
Pressing the M EN U button will restore the
menu screen.
111

You can magnify the area of a recorded image that was inside the AF Frame,
or the area of a face that was detected, to check the focus.
....iiiiiiiii!iliiiiii!ii!i!¸
Press the v button _oswitch _o_he
focus check display (po44)o
A white frame will appear where the AF
frame or face was when the focus was set.
A gray frame wil! appear on a face detected
during playback.
The area within the orange frame appears
magnified.
Switch frames.
Move the zoom lever toward O. once.
The screen shown to the left will appear.
Press the @ button to move to a different
frame when multiple frames appear.
Change the magnification level or
location.
Use the zoom lever to change the display
size, and the Av4_ buttons to change
the display position while checking the
focus=
Pressing the M ENU button resets the
display to Step 1.
112

Approximate Location of
Displayed Area
Move the zoom lever toward O,.
The display wil! zoom in on the image, if
you continue to hold the zoom lever, it will
zoom in up to a maximum factor of 10x.
If you press the ,_'_ 4 _ buttons, you can
move the location of the displayed area.
Move the zoom lever toward _ to zoom
out, or continue to hold it to return to single
image playback.
if you turn the :_!i:: dial, you can switch
images while zoomed.
The camera will choose four images based on the displayed image.
Bfyou choose one of those images, the camera witl choose four more images
letting you enjoy the playing back of images in an unexpected order.
This will work best if you take many shots of various scenes.
Choose .o.
After pressing the _ button, press the
,_v buttons or turn the :_!:i dial to choose
._, then press the _ button again.
Four images will appear as possibilities.
113

Changing image Transitions
Chooseanimage.
Press the _.v 4 _ buttons to choose the
image you want to view next.
The chosen image will be displayed in the
middle, and the next four possibilities wil!
appear.
Pressing the _ button will display the
middle image at ful! size. Press the
button again to restore the odginal disp_ay_
You can also use the zoom lever in the
same way_
Pressing the M EN U button restores single
image playback.
You can choose from three transition effects when switching between images
in single image playback.
Choose [Transition].
Press the MENU button to choose
[Transition] in the [] tab, then press the
_ buttons to choose a transition effecL
114

Using the supplied stereo AV cable (p. 2), you can connect the camera to a
TV to view images you have shot.
Turn off the camera and TV.
........................................................................................................................................................Connect the camera to the TV°
Open the camera's terminal cover and fully
insert the cable plug into the camera's
terminal.
White Red
Yellow _
Yellow _ @ @
R:2-
Wh!!t.............
Insert the cable plug fully into the video
input terminals as shown in the illustration.
Turn on the TV and switch it to the
input the cable is connected to.
::; Turn on the camera.
@ Press the [] button to turn on the camera.
The image will appear on the TV (nothing
will appear on the screen of the camera).
After you finish, turn off the camera and
TV, and unplug the came.
Images will not display correctly if the camera's video output setting (NTSC/PAL)
does not match the TV system. Press the MFNU button, choose the _1' tab and
[Video System] to switch to the correct video system.
115