Canon Elura 60 - Elura 60 MiniDV Camcorder User manual

Digital Video Software
Macintosh
Version 11
Instruction Manual
Mode d’emploi
Manual de Instrucciones
E
F
Es

2
READ CAREFULLY BEFORE USING
Canon Software License Agreement
IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CD-ROM
IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF
THIS AGREEMENT.
This is a license agreement (the “Agreement”) between you and Canon Inc. (“Canon”).
IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT
USE THE SOFTWARE PROGRAM ON THE CD-ROM (INCLUDING ALL SOUND AND IMAGE
DATA) AND THE USER MANUAL IN THIS BOX (COLLECTIVELY, THE “SOFTWARE”) AND
PROMPTLY RETURN THE SOFTWARE TO YOUR POINT OF PURCHASE FOR A REFUND.
In consideration of the right to use the SOFTWARE, you agree to abide by the terms and
conditions of this Agreement.
1. LICENSE: Canon grants you the personal, non-exclusive right to use the SOFTWARE only on a
single computer. You may physically transfer the SOFTWARE from one computer to another
provided that the SOFTWARE is used on only one computer at a time. You shall not install or
use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other
hardware configuration where the SOFTWARE is accessible to more than one CPU or to more
than one user.
With respect to the sound and image data (“Data”) contained in the Software, which are to
be downloaded to the applicable Canon digital camera product, Canon grants you a personal,
non-exclusive license to use the Data on a single Canon digital camera product only.
YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE
USE, TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING
LANGUAGE, ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN
WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.
2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or
copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer
and retain the original for back-up purposes. Any other copying of the SOFTWARE is a
violation of this Agreement. You must reproduce and include the copyright notice on the
back-up copy.
3. SUPPORT AND UPDATES: Neither Canon, nor its subsidiaries, dealers or distributors will be
responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes
or support will be made available for the SOFTWARE.
4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose,
maintain and match the hardware and software components of your computer system. Thus
Canon does not guarantee uninterrupted service or correction of errors or that the functions
or performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED
ON AN “AS IS” BASIS AND WITHOUT WARRANTY OR CONDITION OF ANY KIND. The CD-
ROM storing the SOFTWARE is warranted only against defective material under normal use for
a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by
your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same
without charge when returned by you at your expense to your point of purchase and proven
to be defective upon inspection. The Replacement CD-ROM will be warranted for the
remainder of the original ninety (90) day warranty period of the defective CD-ROM. The
limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse or
misapplication of the SOFTWARE and shall not extend to anyone other than the original user
of the SOFTWARE.

3
E
EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON’S
SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR
CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE
SOFTWARE.
NEITHER CANON NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS
LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION,
DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF
PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF
THE SOFTWARE OR THE USE THEREOF.
NEITHER CANON, NOR ANY OF CANON’S SUBSIDIARIES, DISTRIBUTORS OR DEALERS
SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT
BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF
INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OF IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH
RESULTING FROM NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE
DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY TO YOU.
5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until
expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may
terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate
without notice to you if you fail to comply with any of the terms of this Agreement and you
must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal
rights.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The SOFTWARE is a “commercial item,” as that term is defined at 48 C.F.R. 2.101 (Oct 1995),
consisting of “commercial computer software” and “commercial computer software
documentation,” as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48
C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government
End Users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is
Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.
7. EXPORT RESTRICTIONS: You agree to comply with all export laws and restrictions and
regulations of the country involved, and not to export or re-export, directly or indirectly, the
SOFTWARE in violation of any such laws and restrictions and regulations, or without all
necessary approvals.
8. SEVERABILITY:
In the event that any provision of this Agreement is declared or found to be illegal by any court
or tribunal of competent jurisdiction, such provision shall be null and void with respect to the
jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall
remain in full force and effect.
9. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software
in the United States of America shall be governed and construed in all respects in accordance
with the laws and regulations of the State of New York, without reference to choice of law
principles. The terms of this Agreement as it relates to purchases of the Software in Canada
shall be governed by the laws of the province of Ontario.

4
10. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the
SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of
the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable
copyright and trademark laws, and nothing in this Agreement constitutes a waiver of the
rights of Canon, its affiliated corporations and third party licensors under such laws. You only
own the CD-ROM media in which the Software is stored. Except as expressly provided herein,
no license or right, express or implied, is hereby conveyed or granted by Canon to you for any
intellectual property of Canon. Nothing contained in Paragraph 1 shall be construed to give
Canon any ownership rights in any images, graphics or textual material that you save in
connection with the Software.
You may not modify, remove or delete any or all copyright notices (i) which are contained in
the Software, including any copy thereof, and (ii) which are on the original CD-ROM and on
the medium of a back-up copy made pursuant to Section 2 above.
11 .ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU
HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS
TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON
CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR
PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS
BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO
AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY
AUTHORIZED OFFICER OF CANON.
READ CAREFULLY BEFORE USING

5
E
Contents
READ CAREFULLY BEFORE USING ........................................................................ 2
Canon Software License Agreement .................................................................... 2
Read This First ....................................................................................................... 6
Checking Supplied Accessories ............................................................................ 7
System Requirements ........................................................................................... 8
What Can Be Accomplished with the Software .................................................. 9
Installing the Digital Video Software ................................................................ 10
Connecting the Camcorder to a Computer ....................................................... 13
Downloading Images (ImageBrowser) .............................................................. 14
Starting ImageBrowser ...................................................................................... 14
Downloading Images to the Computer ............................................................. 17
Using a PC Card Reader/Writer .......................................................................... 19
Using Other ImageBrowser Functions ............................................................... 20
Camera Window ............................................................................................... 20
Camera Settings Window ................................................................................. 21
Browser Window .............................................................................................. 22
Image Viewer Window ...................................................................................... 23
Displaying the Image Information ...................................................................... 24
[View] Menu ..................................................................................................... 25
Displaying Images in TimeTunnel ...................................................................... 26
Playing Back Movies From a Memory Card ....................................................... 27
Editing Movies (MovieEdit Task) (Mac OS X Only) ............................................ 28
Running a Slide Show ......................................................................................... 30
Adding Sound to a Still Image ........................................................................... 31
Adding Sound to a Still Image ........................................................................... 31
Playing Back the Sound ..................................................................................... 32
Using the Sound Panel ...................................................................................... 32
Attaching Images to E-mail Messages ............................................................... 33
Printing Still Images (ImageBrowser) ................................................................ 36
The Print Window ............................................................................................. 38
Adjusting Image Quality and Printing (Exif 2.2 Compliant) ................................. 39
Selecting the Print Mode and Number of Copies (DPOF Print Settings) .............. 41
Merging Panoramic Images (PhotoStitch) ........................................................ 42
Exporting Images ................................................................................................ 44
Adding Still Images from Your Computer to the Memory Card ...................... 46
Adding Still Images to the Memory Card ........................................................... 46
Adding Sample Images to the Memory Card ..................................................... 47
Customizing Your Camcorder with the My Camera Settings ........................... 49
Displaying the My Camera Window .................................................................. 49
My Camera Window ......................................................................................... 51
Saving the My Camera Settings to the Camcorder ............................................ 52
Adding Still Images to the My Camera Window ................................................ 53
Uninstalling the Software .................................................................................. 54
Troubleshooting .................................................................................................. 55

6
Disclaimer
• While every effort has been made to ensure that the information contained in
this guide is accurate and complete, no liability can be accepted for any errors
or omissions. Canon reserves the right to change the specifications of the
hardware and software described herein at any time without prior notice.
• No part of this guide may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form, by any means,
without the prior written permission of Canon.
• Canon makes no warranties for damages resulting from corrupted or lost data
due to mistaken operation or malfunction of the camcorder, the software,
memory cards (MultiMediaCards or SD Memory Cards), personal computers,
or peripheral devices, or due to use of a memory card not formatted by a
Canon camcorder.
Trademark Acknowledgments
• Canon is a registered trademark of Canon Inc.
• Macintosh and Mac OS are trademarks of Apple Computer Inc., registered in
the United States and other countries.
iPhoto and QuickTime are trademarks of Apple Computer, Inc.
• Other names and products not mentioned above may be registered
trademarks or trademarks of their respective companies.
Copyright © Canon Inc. 2004 All rights reserved.
Safety Precautions
Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs. Playing the CD-ROM(s) in an audio CD player (music player)
could damage the speakers. It is also possible to suffer from hearing loss from
listening with headphones to the loud sounds of a CD-ROM played on a music
CD player.
Read This First

7
E
Checking Supplied Accessories
Use the following accessories to download recorded images from a memory
card to your computer.
• IFC-300PCU USB Cable
• DIGITAL VIDEO SOLUTION DISK For Macintosh
The explanations in this manual use mainly Mac OS X version 10.2 screen
shots.

8
OS: Mac OS 9.0-9.2, Mac OS X (version 10.1/10.2)
Computer Model: Computers that come with above OS preinstalled and
have built-in USB ports.
CPU: PowerPC
RAM: Mac OS 9.0-9.2: 64 MB or more of application memory
Mac OS X (version 10.1/10.2): 128 MB or more
Interface: USB
Free Hard Disk Space: Canon Utilities
– ImageBrowser 120 MB or more
– PhotoStitch 30 MB or more
Display: 800 ×600 pixels/32,000 colors or better, 1024 ×768
pixels/32,000 colors or better is recommended
❍Proper operation is not guaranteed on a user-built PC.
❍Proper operation is not guaranteed on any particular system, even if it
meets the requirements outlined above.
❍ImageBrowser and PhotoStitch do not operate on disks formatted with
the Unix File System (UFS).
❍A CD-ROM drive is required to install the software.
❍Not all operations performed with a connection to a USB 2.0
compatible board can be guaranteed.
System Requirements

Macintosh
9
E
What Can Be Accomplished with the Software
This topic introduces the main features of the software programs contained on
the DIGITAL VIDEO SOLUTION DISK For Macintosh.
■ImageBrowser ( 14)
• Downloading images recorded onto a memory card to your computer.
• Categorizing and organizing large volumes of images.
• Creating mail attachments from images.
• Exporting images.
• Adding a title and a comment, and printing still images.
• Printing indexes.
■MovieEdit Task ( 28)
• Linking images.
• Inserting text and background music, and adding effects.
• Changing the size or file format of selected movies and saving them as
new files.
■PhotoStitch ( 42)
Merging panoramic images.
This instruction manual explains how to install the software, what you can do
with the main features and how to operate them. For more detailed operational
instructions, refer to the Help menu of each software program.

10
Installing the Digital Video Software
Before you connect the camcorder to the computer with the USB cable
for the first time, you must install the Digital Video Software.
Mac OS X (version 10.1/10.2) Users:
Your digital video camcorder is equipped with the standard Picture
Transfer Protocol (PTP). This protocol enables you to download images by
simply connecting the camera to a computer with the USB cable (using
software such as iPhoto or Image Capture preinstalled on Mac OS X).
However, please note that there are several limitations to downloading
images with this method. To avoid these problems, install ImageBrowser
to download images.
❍It may take a few minutes, after connecting the camcorder, until you
can download images.
❍Only AVI* movie files can be downloaded. Thumbnails cannot be
downloaded.
* Two files are created in the camcorder (for example: [MVI_0001.AVI]
and [MVI_0001.THM]). [MVI_0001.THM] files cannot be downloaded
but movies can still be played back on the computer.
❍Mac OS X version 10.2
• You may not be able to download images with iPhoto if the memory
card contains an enormous volume of images (approx. 900 or more).
• The Exif* version may change to 2.1 and image information may be
modified when downloading images with Image Capture. To
download images without any information changes, use the
following procedures:
1. Connect the camcorder to the computer and prepare it to
transfer data.
2. Start Image Capture.
3. In the screen that appears, click [Options].
4. Remove the checkmark from [Embed Colorsync profile] in the
[Download Options] tab and click [OK].
* Images shot with camcorders complying with Exif Print
incorporate shooting settings information, such as the shooting
conditions and program AE mode, along with the image data.
1. Close any programs that are running.
2. Set the DIGITAL VIDEO SOLUTION DISK For Macintosh in the
computer’s CD-ROM drive.

Macintosh
11
E
3. Mac OS 9.0-9.2: Double click the CD-ROM icon, followed by
the [Mac OS 9] and [Canon Digital Video Installer] icons.
Mac OS X (version 10.1/10.2): Double click the CD-ROM icon,
followed by the [Mac OS X] and [Canon Digital Video
Installer] icons.
The installer panel appears.
4. Select your language.
5. Click Digital Video Software [Install].
6. Select [Easy Installation] and Click [Next].
To install the software individually, select [Custom Installation].
Installer Panel

12
7. Read the license agreement and click [Agree].
8. Review the installation settings and click [Next].
Installation starts.
9. When the “Installation has finished.” message appears, click
[OK].
10 .After the installation is complete, restart the computer as
prompted.
Installing the Digital Video Software

Macintosh
13
E
Connecting the Camcorder to a Computer
❍Make sure the camcorder is being powered using the power adapter
before connecting it to a computer.
❍Be sure to install the Digital Video Software before you connect the
camcorder to the computer.
❍Connect the USB cable directly to one of the computer’s main USB
ports. The interface may not function correctly if the camcorder is
connected via a USB hub.
❍The connection may not operate correctly if you are using other USB
devices, excluding USB mice or keyboards, at the same time. If this
occurs, disconnect the other devices from the computer and try
reconnecting the camcorder.
❍Do not connect two or more camcorders to the same computer via the
USB interface. The connections may not operate correctly.
❍
Never allow the computer to go into standby (sleep) mode while
a camcorder is connected via the USB interface. If it does happen,
never disconnect the USB cable. Try to awaken the computer with
the camcorder in the connected state. Some computers will not
awaken properly if you disconnect the camcorder while they are
in standby mode. Please refer to your computer manual for
instructions regarding its standby mode.
❍Refer to your computer manual for the location of the computer’s USB
ports.
❍See your camcorder instruction manual for connecting instructions.
1. Insert a memory card containing images into the camcorder.
2. Connect the power adapter to the camcorder.
3. Turn the POWER switch to PLAY (VCR) and move the TAPE/
CARD switch to CARD.
Wait until the card access indicator stops flashing.
4. Attach the supplied USB cable to the computer’s USB port
and the camcorder’s USB Terminal.
USB Cable
Camcorder End Computer End
USB Terminal
on the Camcorder
USB Port on
the Computer

14
Downloading Images (ImageBrowser)
Below explains the procedure for connecting a camcorder to a computer using
the USB cable.
For connecting a PC card reader/writer, see Using a PC Card Reader/Writer
(19).
❍Observe following precautions when the camcorder’s card access
indicator is flashing (the camcorder is reading or writing from or to the
memory card). Failure to do so may cause memory card data to
become corrupted.
– Do not open the memory card cover, remove the memory card or
detach the USB cable.
– Do not turn off the camcorder or the computer.
– Do not change the position of the POWER switch or the TAPE/
CARD switch.
❍Format the memory card with the camcorder or from the Camera
Settings Window ( 21).
❍Images recorded onto the memory card or downloaded to the hard
disk are important original data files. Create a copy of the file first
before working on it on your computer.
Starting ImageBrowser
1. Connect the camcorder to the computer ( 13).
• ImageBrowser starts and the ImageBrowser Automation Wizard dialog
appears. In the ImageBrowser Automation Wizard dialog, you can select
the action that is carried out after ImageBrowser starts.
• A dialog with the previously selected automated settings will appear the
next time you start ImageBrowser.
1. To use these settings unchanged, click the [Start] button.
2. To do nothing, click [Cancel].
3. To change the settings, click [Settings Change], select the action and
click [OK].
2. Select [Display Images] and click [OK].
The Communications Settings window appears. This window only appears
the first time the camcorder is connected.
Mac OS 9.0-9.2

Macintosh
15
E
How to Set ImageBrowser to Not Start Automatically
1. Click the Apple menu and select [Control Panels] and
[Canon ImageBrowser Auto Launch].
The Settings for USB Connection dialog will display.
2. Click [The application program below will start] to remove
the check mark.
3. Click the close box at the upper left to close the dialog.
ImageBrowser will cease to start automatically thereafter.
Click here to close the dialog.
3. Confirm that [USB port] and [Canon Camera] are selected and
click [Set].
The Camera Window opens, displaying the camcorder images as
thumbnails (small images).

16
Downloading Images (ImageBrowser)
Do not connect the camcorder while the Classic environment is started.
Likewise, do not start the Classic environment while the camcorder is
connected.
1. Connect the camcorder to the computer ( 13).
2. Double-click the [Canon ImageBrowser] icon on the desktop.
If the Canon ImageBrowser icon does not appear on the desktop, double-
click the [Canon Utilities] folder on the drive on which the program was
installed, followed by the [ImageBrowser] folder and [ImageBrowser] icon.
3. Click [Canon Camera] in the Explorer View section.
The Communications Settings window appears. This window only appears
the first time the camcorder is connected.
4. Confirm that [USB port] and a Canon camcorder are selected
and click [Set].
The Camera Window opens, displaying the camcorder images as
thumbnails (small images).
Explorer View Section
Mac OS X (version 10.1/10.2)

Macintosh
17
E
Explorer View Section
Explorer View Section
Downloading Images to the Computer
1. Mac OS 9.0-9.2: Select [Macintosh HD] in the explorer view
section.
Mac OS X (version 10.1/10.2): Select the [ (user name)]
subfolder of the [Users] folder in [Macintosh HD].
2. Create a new folder for saving images from the memory card
in the camcorder.
Click the [File] menu and select [New Folder]. A folder with the name
“Untitled” will be created. Click it to change the folder name as you wish.
In this example, we will input “ZOO.”
3. In the Explorer View Section, click the newly created folder.

18
Downloading Images (ImageBrowser)
4. Select images in the Camera window and click [DOWNLOAD].
• You can select multiple images by holding down [Shift] or [Option] +
[Shift] while clicking.
• A blue frame appears around the selected image.
• Downloaded images are saved to the computer and appear in the
Browser area.
To disconnect the camcorder, click the close box (Mac OS 9.0-9.2) or the red
close box (Mac OS X (version 10.1/10.2)) at the upper left of the Camera
Window. The Camera Window will close.
Thumbnail
Explorer View
Section
Browser area

Macintosh
19
E
Using a PC Card Reader/Writer
The basic operations of ImageBrowser are the same as when you connect the
camcorder to the computer. Follow the procedure below to open the Camera
Window.
For instructions on how to connect the PC Card Reader/Writer, please refer to
the PC Card Reader Manual.
1. Insert a memory card into the reader.
Mac OS X (version 10.1/10.2): If a dialog appears, click the red close box.
2. Double-click the [Canon ImageBrowser] icon on the desktop.
• ImageBrowser starts.
• If the icon does not appear on the desktop, double-click the folder in
which you installed the program, followed by the [Canon Utilities] and
[ImageBrowser] folders and the [ImageBrowser] file.
3. Double-click the [CANON_DV] and [DCIM] folders in the
Explorer View Section.
The Camera Window opens, displaying the memory card images as
thumbnails (small images).
Explorer View Section
❍Double-clicking an image on the camera window imports it to the
computer.
❍You can also download images to the computer by dragging them
from the Camera window and dropping them on the Browser area or
the Explorer View Section.

20
Using Other ImageBrowser Functions
Camera Window
The Camera Window opens when a connection to a camcorder is initiated.
Images will be displayed as thumbnails (small images). Movies are displayed with
the first scene as a still image, indicated with a movie icon. Buttons are activated
when an image is selected.
[SETUP OPTIONS]: Adjusts the connection settings and camcorder
settings. Menu options: Camera Settings,
Communication Settings and My Camera.
[CONNECT CAMERA]: Reconnects the camcorder to the computer.
[SELECT]: Selects images. Menu options: Select All and
Deselect All.
[DELETE]: Deletes selected images.
[DOWNLOAD]: Downloads selected image to the computer.
[PRINT]: Prints selected still images. Menu options: Layout
printing and Index printing.
[ROTATE]: Rotates still images. Menu options: 90 degrees
right, 90 degrees left and 180 degrees.
[UPLOAD]: Adds selected still images to the memory card.
[IMAGE INFO]: Displays image information (such as shooting date/
time and image size).
[SLIDE/DPOF]: The [SLIDE] function cannot be used. [DPOF] allows
you to select the print order settings.
Thumbnails
The image is displayed
in reduced size.
The model name of your
camcorder appears in place of the
asterisks (*****).
Movie icon