Canvas DOVER 063-6348-8 User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
DOVER 30”
(76.2 CM) BATHROOM VANITY
PRODUCT NO. 063-6348-8-GREY
063-6342-0-WHITE

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS® collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS® makes it easy to refresh your space
to reflect your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVAS® products
to life. We can’t wait to see!

Parts List 4
Before You Begin Assembly 9
Step-by-step Guide 11
Technical Data 20
Troubleshooting 21
Caring for Your Item 21
Warranty 22
TABLE OF CONTENTS
TOOLS REQUIRED
No. 2 Phillips Screwdriver
Tip Shown Actual Size
NOTE: Do not over drill/
be aware of over-drilling
Hex Wrench 2 People
• Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
• Any assembly or maintenance of the product must be carried out by adults
only.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
• Do not allow your children to climb or jump on furniture due to possible
accident, injury or death. A child climbing on a piece of furniture can make it
top-heavy and cause the furniture to tip over.
• Keep children and pets away during assembly.
• Repairing and replacing parts should be done by a qualified technician.
• This unit is intended for use only within the maximum weight indicated. Use
with loads heavier than the maximum weight indicated may result in instability
causing possible injury.
• Failure to follow these warnings could result in serious injury.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.

DOVER 30” (76.2 CM) BATHROOM VANITY4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
7Lower Back Stretcher 1
8Middle Panel 1
9Bottom Panel 1
10 Back Panel 1
11 Upper Front Stretcher 1
12 Bottom Front Stretcher 2
13 Left Door 1
1Backsplash 1
2Vanity Top 1
3Side Panel Left 1
4Side Panel Right 1
5Upper Back Stretcher 1
6Middle Back Stretcher 1

DOVER 30” (76.2 CM) BATHROOM VANITY 5
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
14 Right Door 1

DOVER 30” (76.2 CM) BATHROOM VANITY6
EXPLODED PARTS
3
4
1
2
10
5
6
8
13
14
9
11
7 12
12

DOVER 30” (76.2 CM) BATHROOM VANITY 7
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
ACam Lock 28
BCam Bolt 28
GM4x12 mm Screw 24
HM3.5x15 mm Screw 12
CM8x30 mm Wood Dowel 24
D1/4”x32 mm Bolt 2
EM4x25 mm Screw 2
FHandle with Bolts 2
ISlow Close Hinge 4

DOVER 30” (76.2 CM) BATHROOM VANITY8
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
JHex Wrench 1
KLeveller 4
LGlue 1

DOVER 30” (76.2 CM) BATHROOM VANITY 9
BEFORE YOU BEGIN ASSEMBLY
MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and
make sure you have all tools required for assembly.
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS® customer service at 1-888-670-6684 (toll free).
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.

DOVER 30” (76.2 CM) BATHROOM VANITY10
BEFORE YOU BEGIN ASSEMBLY
CAM LOCK SYSTEM OPERATION
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN
BE WIPED OFF WITH DAMP CLOTH.
Insert dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY.
GLUE
X
X
1 4
3
2
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw cam bolt into the pre-drilled small holes on panel. Align the panels to be joined
so that the cam bolt goes into the pre-drilled hole on the edge of the second panel and
protrudes into the hole that will house the cam lock.
2. Insert the cam lock into pre-drilled large hole on panel. Make sure arrow on the cam
lock is pointed toward the cam bolt.
3. Once the cam bolt is connected inside cam lock, take a cross-head screwdriver and
tighten the cam lock by turning clockwise.
You are now ready to assemble the product.

DOVER 30” (76.2 CM) BATHROOM VANITY 11
STEP-BY-STEP GUIDE
11 X18X19X1AX4BX4 12 X2
9
8
12
12
A
B
C
A
B
C
CX4
STEP 1
Attach bottom front stretchers 12 to middle panel 8 and bottom panel 9using cam
locks A, cam bolts B and M8x30 mm wood dowels C.

DOVER 30” (76.2 CM) BATHROOM VANITY12
STEP-BY-STEP GUIDE
7X1AX2BX2 6X1EX2 CX4
8
9
7
6
A
B
C
C
E
STEP 2
Attach lower back stretcher 7to bottom panel 9using cam locks A, cam bolts B
and M8x30 mm wood dowels C.
Attach middle back stretcher 6to middle panel 8using M4x25 mm screws E and
M8x30 mm wood dowels C.

DOVER 30” (76.2 CM) BATHROOM VANITY 13
STEP-BY-STEP GUIDE
14 X1GX8IX4 13 X1FX2
13
14
F
G
I
Attach slow close hinges ito left door 13 and right door 14 using M4x12 mm
screws G. Remove preassembled bolts from handles F. Attach drawer handles F to
left door 13 and right door 14, securing with previously removed bolts.
STEP 3

DOVER 30” (76.2 CM) BATHROOM VANITY14
STEP-BY-STEP GUIDE
4X15X1 3X1
A
9
8
5
4
3
B
C
D
11
AX22 BX22 DX2 CX16
Attach upper back stretcher 5, upper front stretcher 11 and bottom panel assembly
to side panel left 3and side panel right 4using cam locks A, cam bolts B, M8x30
mm wood dowels Cand 1/4”x32 mm bolts D.
Note: Make sure cam bolts Bare completely seated.
JX1
STEP 4

DOVER 30” (76.2 CM) BATHROOM VANITY 15
STEP-BY-STEP GUIDE
HX12 11 X1
11
4
H
K
Attach back panel 11 to behind the vanity assembly using M3.5x15 mm screws H.
Attach levellers Kto the base of the vanity assembly.
STEP 5
KX4

DOVER 30” (76.2 CM) BATHROOM VANITY16
STEP-BY-STEP GUIDE
14 X1 13 X1
14
13
G
Attach the hinge bases of the left door 13 and right door 14 to the anity assembly,
using the pilot holes as a guide with M4x12 mm screws G.
Open and close the doors to make sure they are aligned and shut correctly. If
necessary, adjust the screws for a good fit.
STEP 6
GX16

DOVER 30” (76.2 CM) BATHROOM VANITY 17
STEP-BY-STEP GUIDE
Suggested way to attach vanity to wall.
(Hardware NOT Provided.)
STEP 7

DOVER 30” (76.2 CM) BATHROOM VANITY18
STEP-BY-STEP GUIDE
2X1
2
Silicone (NOT Provided.)
3
Apply silicone around the edges of the vanity assembly to secure the vanity top 2.
STEP 8

DOVER 30” (76.2 CM) BATHROOM VANITY 19
STEP-BY-STEP GUIDE
1X1
1
Silicone (NOT Provided.)
3
Apply silicone around the edges of backsplash 1and attach it to vanity assembly.
STEP 9

DOVER 30” (76.2 CM) BATHROOM VANITY20
TECHNICAL DATA
SPECIFICATIONS
30”
76.2 cm
20”
50.8 cm
34 1/2”
87.6 cm
38 7/16”
97.6 cm
ASSEMBLED DIMENSIONS (W x D x H) 30 x 20 x 34 1/2”
76.2 x 50.8 x 87.6 cm
ASSEMBLED WEIGHT 104.72 lb
47. 5 kg
MAXIMUM WEIGHT CAPACITY 200 lb
90.7 kg