Canyon CN-D05P User manual

3
1 2
Introduction
FeaturesOverview
PackageContents
Thisuser'sguide isfor5/8-Port 10/100MEthernetMini
Switch.The5/8-Port 10/100MEthernetMiniSwitch
isdesigned foreasyinstallation andhighperformance
inanenvironmentwheretrafficon thenetworkandthe
numberofusers increasecontinuously.
Small businessesandcorporatebranchofficescan
nowtakefull advantage of100MbpsFast Ethernet
performance andpreserveexistingdesktop investment
withno changesrequired toPCs,NICs,cabling,drivers,
orPC configurations.
•
•
AutoMDI/MDIXfunction eachport
•
Auto-negotiation on eachport.
•
Auto-polaritydetection forcorrection ofincorrect
polarityon thereceived twisted pairon eachport
•
Store-and-forwardswitchingschemecapabilityto
support rateadaptation andensuresdataintegrity
•
Dataforwardingrate148,800ppsperport at100%
ofwire-speed
•
Theshortest forwardinglatencytime
PerformanceHighlights
•One5/8-Port 10/100MEthernetMiniSwitch
•OneExternalPowerAdapter
•TwoScrews
•TwoAnchors
•OneUser’sGuide
Thefollowingdescribesthefrontpanel, rearpaneland
LEDindicators ofthe5/8-Port 10/100MEthernetMini
Switch.
Hardware
FrontPanel
LEDIndicators
LED Status Description
Power On Power on
Link/Act On Link status of connected port
Blink Data Transmission status of connected port
RearPanel
DCIN
5 4 3 2 1
DC IN
643 2
1
5
7
8
5-Port10/100MEthernetMiniSwitch
•
•
Support MDIXautodetect
• Auto-negotiation capability
IEEE802.3x flowcontrolforFull-Duplexoperation
• Five/Eight100/10MbpsRJ-45 ports
• ConformstoIEEE 802.310BASE-TandIEEE802.3u
100BASE-TX standards
• BackpressureforHalf-Duplexflowcontrol
• Full andHalf-Duplexmode operation
• Support store-and-forwardmode switching
• Source address learningandagingfunction
LEDstoindicate:Link/ActandPower
8-Port10/100MEthernetMiniSwitch
5-Port10/100MEthernetMiniSwitch
8-Port10/100MEthernetMiniSwitch

1.AutoMDIXFunction
Theswitchport canconncttootherswitches,NICs,
orhubs.
Connectway
APC orhub canbe connected tothe5/8-Port N-Way
MiniSwitchviaatwisted-paircable.Theconnection
canlink toany port from5/8-Port N-WayMiniSwitch.
NetworkConnection
45
2.TypeofPowerIn
DCIN
5
4
3
2
1
DC IN
6
4
3
2
1
5
7
8
RJ-45 JACK
Model Power Function
AX/SX Adaptor 7.5V
Troubleshooting
PowerQuestion
1.PleasecheckyourPowersource isok ornot.
2.HaveyourAdaptorplugged intotheSwitch’sDCJack?
Link Fail
You can checkthisListPoint
1.Is thecablebroken?
2.Doesthecableplug in?
3.Is thepoweron?
PacketLost
You can checkthisListPoint
1.If youuse100MLink,thetwisted-pairmust support
100Mbps,andthecableisCat.5orUp.
2.If youuse10MLink,thetwisted-pairmust support
10Mbps,andthecableisCat.3orUp.
3.If yourcableistoo old,pleasechange it.
3.PowerConsumption
Voltage 7.5V
Current Max 500mA
Power
Dissipation 3.5W(Max)

User'sGuide
Recyclable
5/8-Port10/100M
EthernetSwitch
TechnicalSpecification
Standards : Auto MDIX Function
IEEE802.3 10BASE-T Ethernet
IEEE802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE Std 802.3 N-Way auto-negotiation
IEEE802.3 Frame types : Transparent
IEEE802.3x flow control for Full-Duplex
Back Pressure flow control for Half-Duplex
Protocol : CSMA/CD
Topology : Star
Transmission
Method : Stored-and-forward
Throughput :
10 BASE-T :
100 BASE-T : 10Mbps (Half-Duplex); 20Mbps(Full-Duplex) 100Mbps (Half-Duplex); 200Mbps(Full-Duplex)
Media :
10BASE-T :
100BASE-TX : twisted-pair UTP/STP Cat. 3,4,5 or up twisted-pair UTP/STP Cat. 5 or up
RAM Buffer : Total 128K bytes per device
MAC Address
Table : 1 K
Smart Function:QoS(option)
Brocast storm Protection
MAC Address table aging
Automatic Power saving
Temperature :
Operating :
Storage : 5 0C ~ 45 0C 0 0C ~ 65 0C
Humidity :
Operating :
Storage : 10% ~ 90% 5% ~ 95%
Conformance : FCC Class B, CE Mark Class B
FCC Statement
Thisdevice complieswithFCC RulesPart 15.Operation is
subjecttothefollowingtwoconditions:
1.Thisdevice maynotcauseharmfulinterference,and
2.Thisdevice must acceptany interference received,
includinginterference thatmaycauseundesired ope-
ration.
Thisequipmenthasbeentested andfoundtocomplywith
thelimits foraClass Bdigitaldevice,pursuanttoPart 15
oftheFCC Rules.Theselimits aredesigned toprovide
reasonableprotection against harmfulinterference ina
residentialinstallation.Thisequipmentgenerates,usesand
canradiateradiofrequencyenergyand,ifnotinstalled and
used inaccordance withmanufacturer'sinstructions,may
causeharmfulinterference toradiocommunications.
However,thereisno guarantee thatinterference will not
occurinaparticularinstallation.If thisequipmentdoes
causeharmfulinterference toradioortelevision reception,
whichcanbe determined byturningtheequipmentoff and
on,theuserisencouraged totrytocorrecttheinterference
byoneormoreofthefollowingmeasures:
1.Re-orientorrelocatethereceivingantenna.
2.Increasetheseparation betweentheequipmentand
receiver.
3.Connecttheequipmenttoanoutleton acircuit
differentfromthattowhichthereceiverisconnected.
4.Consultthedealeroranexperienced radio/TVtechnician
forhelp.
WARNING!Anychangesormodificationstothispro-
ductnotexpresslyapprovedbythemanufacturercould
voidanyassurancesofsafetyorperformance and could
result inviolation ofPart15 oftheFCC Rules.
CEDeclaration ofconformity
Thisequipmentcomplieswiththerequirements relatingto
electromagneticcompatibility,EN55022 class BforITE
andEN50082-1.Thismeets theessentialprotection
requirements oftheEuropeanCouncil Directive89/336/
EEC on theapproximation ofthelawsoftheMember
Statesrelatingtoelectromagneticcompatibility.
Trademarks
All company,brand,andproductnamesaretrademarksor
registered trademarksoftheirrespectivecompanies.
64738058SC0FL