Car Keys Express REPLACEMENT REMOTE User manual
PANEL 1 PANEL 2 PANEL 3 PANEL 4
COMPATIBILITY LOOKUP
FORD
7. Turn the ignition to RUN. The LED will
turn off to indicate end of pairing mode.
8. Test all remotes.
FCC REGULATORY STATEMENT
FCC ID: 2AOKM-FD1
47 CFR §15.19(a)(3) THIS DEVICE
COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS. (1) THIS
DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED
OPERATION.
Note: Changes or modifications
not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
HELP
For help or assistance, please contact
technical support at: 888-598-8910.
OTHER KEYS
Visit CarKeysExpress.com to find a variety
of award-winning products, like Universal
Car Keys, Universal Car Remotes, and OEM
keys and remotes.
LINCOLN
MERCURY
PAIRING INSTRUCTIONS
Instructions have timing requirements.
Waiting too long between steps may result
in your vehicle’s computer timing out,
requiring you to start over. Once you begin
the pairing procedure, be sure to move at a
quick and even pace.
PAIR CODE 1
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 3 seconds, with the 4th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
4. Within 20 seconds press any button
on the second remote. The door locks
will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF.
7. Test all remotes.
PAIR CODE 2
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 8 times
within 10 seconds, with the 8th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
www.CarKeysExpress.com
V3.0221 4. Within 20 seconds, press any button
on the second remote. The door
locks will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF. Locks will
again cycle to indicate the end of
pairing mode.
7. Test all remotes.
PAIR CODE 3
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The system will
chime to confirm pairing mode.
4. Within 20 seconds, press any button
on the first remote. The system will
chime once to confirm pairing.
5. Within 20 seconds, press any button
on the second remote. The system
will chime once to confirm pairing.
6. Repeat step 5 for any additional
remotes.
7. Turn ignition to RUN to exit
programming mode.
8. Test all remotes.
PAIR CODE 4
1. Fasten all seat belts and close all
doors.
2. Insert a working key into the ignition.
3. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds, with the 4th time
ending in RUN.
4. Turn the ignition to OFF. An acoustic
signal will sound to confirm pairing
mode.
5. Within 10 seconds, press and hold any
button on the first remote. Wait for
an acoustic sound and warning lamp
to flash (confirming pairing), then
release the button.
6. Wait 2 seconds, but within 10
seconds, repeat step 5 for any
additional remotes.
7. To exit pairing mode, turn the ignition
to RUN or wait 10 seconds.
8. Test all remotes.
PAIR CODE 5
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The LED in
the clock/trip computer will light
up continuously to confirm pairing
mode.
4. Within 20 seconds, press any button
on the first remote. The LED in the
clock will flash 4 times to confirm
pairing.
5. Within 20 seconds, press any button
on the second remote. The LED in
the clock will flash 4 times to confirm
pairing.
6. Repeat step 5 for any additional
remotes.
MAKE/
MODEL YEARS PAIR
CODE
REPLACEMENT
REMOTE
FORD, LINCOLN, MERCURY
USER GUIDE
C-Max 2013-2018 2
Crown Victoria 2000-2005 1
Crown Victoria 2006-2011 2
Edge 2007-2015 2
Escape 2001-2018 2
Escort 1998-2003 2
Expedition 2003-2017 2
Explorer 2000-2015 2
Explorer Sport 2000-2005 2
Five Hundred 2005-2007 2
Flex 2009-2017 2
Focus 2000-2006 3
Focus 2007 4
Focus 2010-2018 2
Freestar 2004-2007 2
Freestyle 2005-2007 2
Fusion 2006-2011 2
Mustang 2000-2009 2
Mustang 2010-2014 2
Taurus 1998-2009 2
Taurus 2008-2018 2
Taurus X 2008-2010 2
Thunderbird 2003-2005 2
Transit 2013-2014 2
Transit Connect 2016 2
Windstar 1999-2004 2
Cougar 1999-2002 5
Grand Marquis 1998-2005 1
Grand Marquis 2006-2011 2
Marauder 2003-2004 1
Mariner 2007-2011 2
Milan 2006-2011 2
Montego 2005-2007 2
Mountaineer 2002-2009 2
Tribute 2007-2011 2
Sable 2008-2009 2
Aviator 2003-2005 2
LS 2003-2006 2
MKS 2009-2012 2
MKX 2007-2010 2
MKZ 2007-2017 2
Navigator 2003-2017 2
Zephyr 2006 2
Instruction Manual Part Number: FDCRR-7010
Replacing car keys is simple
and affordable again.TM
12101 Sycamore Station Place Ste. 140
Louisville, KY 40299
© 2021 Car Keys Express
PANEL 1 PANEL 2 PANEL 3 PANEL 4
COMPATIBILITY LOOKUP
FORD
7. Turn the ignition to RUN. The LED will
turn off to indicate end of pairing mode.
8. Test all remotes.
FCC REGULATORY STATEMENT
FCC ID: 2AOKM-FD1
47 CFR §15.19(a)(3) THIS DEVICE
COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS. (1) THIS
DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED
OPERATION.
Note: Changes or modifications
not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
HELP
For help or assistance, please contact
technical support at: 888-598-8910.
OTHER KEYS
Visit CarKeysExpress.com to find a variety
of award-winning products, like Universal
Car Keys, Universal Car Remotes, and OEM
keys and remotes.
LINCOLN
MERCURY
PAIRING INSTRUCTIONS
Instructions have timing requirements.
Waiting too long between steps may result
in your vehicle’s computer timing out,
requiring you to start over. Once you begin
the pairing procedure, be sure to move at a
quick and even pace.
PAIR CODE 1
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 3 seconds, with the 4th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
4. Within 20 seconds press any button
on the second remote. The door locks
will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF.
7. Test all remotes.
PAIR CODE 2
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 8 times
within 10 seconds, with the 8th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
www.CarKeysExpress.com
V3.0221 4. Within 20 seconds, press any button
on the second remote. The door
locks will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF. Locks will
again cycle to indicate the end of
pairing mode.
7. Test all remotes.
PAIR CODE 3
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The system will
chime to confirm pairing mode.
4. Within 20 seconds, press any button
on the first remote. The system will
chime once to confirm pairing.
5. Within 20 seconds, press any button
on the second remote. The system
will chime once to confirm pairing.
6. Repeat step 5 for any additional
remotes.
7. Turn ignition to RUN to exit
programming mode.
8. Test all remotes.
PAIR CODE 4
1. Fasten all seat belts and close all
doors.
2. Insert a working key into the ignition.
3. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds, with the 4th time
ending in RUN.
4. Turn the ignition to OFF. An acoustic
signal will sound to confirm pairing
mode.
5. Within 10 seconds, press and hold any
button on the first remote. Wait for
an acoustic sound and warning lamp
to flash (confirming pairing), then
release the button.
6. Wait 2 seconds, but within 10
seconds, repeat step 5 for any
additional remotes.
7. To exit pairing mode, turn the ignition
to RUN or wait 10 seconds.
8. Test all remotes.
PAIR CODE 5
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The LED in
the clock/trip computer will light
up continuously to confirm pairing
mode.
4. Within 20 seconds, press any button
on the first remote. The LED in the
clock will flash 4 times to confirm
pairing.
5. Within 20 seconds, press any button
on the second remote. The LED in
the clock will flash 4 times to confirm
pairing.
6. Repeat step 5 for any additional
remotes.
MAKE/
MODEL YEARS PAIR
CODE
REPLACEMENT
REMOTE
FORD, LINCOLN, MERCURY
USER GUIDE
C-Max 2013-2018 2
Crown Victoria 2000-2005 1
Crown Victoria 2006-2011 2
Edge 2007-2015 2
Escape 2001-2018 2
Escort 1998-2003 2
Expedition 2003-2017 2
Explorer 2000-2015 2
Explorer Sport 2000-2005 2
Five Hundred 2005-2007 2
Flex 2009-2017 2
Focus 2000-2006 3
Focus 2007 4
Focus 2010-2018 2
Freestar 2004-2007 2
Freestyle 2005-2007 2
Fusion 2006-2011 2
Mustang 2000-2009 2
Mustang 2010-2014 2
Taurus 1998-2009 2
Taurus 2008-2018 2
Taurus X 2008-2010 2
Thunderbird 2003-2005 2
Transit 2013-2014 2
Transit Connect 2016 2
Windstar 1999-2004 2
Cougar 1999-2002 5
Grand Marquis 1998-2005 1
Grand Marquis 2006-2011 2
Marauder 2003-2004 1
Mariner 2007-2011 2
Milan 2006-2011 2
Montego 2005-2007 2
Mountaineer 2002-2009 2
Tribute 2007-2011 2
Sable 2008-2009 2
Aviator 2003-2005 2
LS 2003-2006 2
MKS 2009-2012 2
MKX 2007-2010 2
MKZ 2007-2017 2
Navigator 2003-2017 2
Zephyr 2006 2
Instruction Manual Part Number: FDCRR-7010
Replacing car keys is simple
and affordable again.TM
12101 Sycamore Station Place Ste. 140
Louisville, KY 40299
© 2021 Car Keys Express
PANEL 1 PANEL 2 PANEL 3 PANEL 4
COMPATIBILITY LOOKUP
FORD
7. Turn the ignition to RUN. The LED will
turn off to indicate end of pairing mode.
8. Test all remotes.
FCC REGULATORY STATEMENT
FCC ID: 2AOKM-FD1
47 CFR §15.19(a)(3) THIS DEVICE
COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS. (1) THIS
DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED
OPERATION.
Note: Changes or modifications
not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
HELP
For help or assistance, please contact
technical support at: 888-598-8910.
OTHER KEYS
Visit CarKeysExpress.com to find a variety
of award-winning products, like Universal
Car Keys, Universal Car Remotes, and OEM
keys and remotes.
LINCOLN
MERCURY
PAIRING INSTRUCTIONS
Instructions have timing requirements.
Waiting too long between steps may result
in your vehicle’s computer timing out,
requiring you to start over. Once you begin
the pairing procedure, be sure to move at a
quick and even pace.
PAIR CODE 1
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 3 seconds, with the 4th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
4. Within 20 seconds press any button
on the second remote. The door locks
will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF.
7. Test all remotes.
PAIR CODE 2
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 8 times
within 10 seconds, with the 8th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
www.CarKeysExpress.com
V3.0221 4. Within 20 seconds, press any button
on the second remote. The door
locks will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF. Locks will
again cycle to indicate the end of
pairing mode.
7. Test all remotes.
PAIR CODE 3
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The system will
chime to confirm pairing mode.
4. Within 20 seconds, press any button
on the first remote. The system will
chime once to confirm pairing.
5. Within 20 seconds, press any button
on the second remote. The system
will chime once to confirm pairing.
6. Repeat step 5 for any additional
remotes.
7. Turn ignition to RUN to exit
programming mode.
8. Test all remotes.
PAIR CODE 4
1. Fasten all seat belts and close all
doors.
2. Insert a working key into the ignition.
3. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds, with the 4th time
ending in RUN.
4. Turn the ignition to OFF. An acoustic
signal will sound to confirm pairing
mode.
5. Within 10 seconds, press and hold any
button on the first remote. Wait for
an acoustic sound and warning lamp
to flash (confirming pairing), then
release the button.
6. Wait 2 seconds, but within 10
seconds, repeat step 5 for any
additional remotes.
7. To exit pairing mode, turn the ignition
to RUN or wait 10 seconds.
8. Test all remotes.
PAIR CODE 5
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The LED in
the clock/trip computer will light
up continuously to confirm pairing
mode.
4. Within 20 seconds, press any button
on the first remote. The LED in the
clock will flash 4 times to confirm
pairing.
5. Within 20 seconds, press any button
on the second remote. The LED in
the clock will flash 4 times to confirm
pairing.
6. Repeat step 5 for any additional
remotes.
MAKE/
MODEL YEARS PAIR
CODE
REPLACEMENT
REMOTE
FORD, LINCOLN, MERCURY
USER GUIDE
C-Max 2013-2018 2
Crown Victoria 2000-2005 1
Crown Victoria 2006-2011 2
Edge 2007-2015 2
Escape 2001-2018 2
Escort 1998-2003 2
Expedition 2003-2017 2
Explorer 2000-2015 2
Explorer Sport 2000-2005 2
Five Hundred 2005-2007 2
Flex 2009-2017 2
Focus 2000-2006 3
Focus 2007 4
Focus 2010-2018 2
Freestar 2004-2007 2
Freestyle 2005-2007 2
Fusion 2006-2011 2
Mustang 2000-2009 2
Mustang 2010-2014 2
Taurus 1998-2009 2
Taurus 2008-2018 2
Taurus X 2008-2010 2
Thunderbird 2003-2005 2
Transit 2013-2014 2
Transit Connect 2016 2
Windstar 1999-2004 2
Cougar 1999-2002 5
Grand Marquis 1998-2005 1
Grand Marquis 2006-2011 2
Marauder 2003-2004 1
Mariner 2007-2011 2
Milan 2006-2011 2
Montego 2005-2007 2
Mountaineer 2002-2009 2
Tribute 2007-2011 2
Sable 2008-2009 2
Aviator 2003-2005 2
LS 2003-2006 2
MKS 2009-2012 2
MKX 2007-2010 2
MKZ 2007-2017 2
Navigator 2003-2017 2
Zephyr 2006 2
Instruction Manual Part Number: FDCRR-7010
Replacing car keys is simple
and affordable again.TM
12101 Sycamore Station Place Ste. 140
Louisville, KY 40299
© 2021 Car Keys Express
PANEL 1 PANEL 2 PANEL 3 PANEL 4
COMPATIBILITY LOOKUP
FORD
7. Turn the ignition to RUN. The LED will
turn off to indicate end of pairing mode.
8. Test all remotes.
FCC REGULATORY STATEMENT
FCC ID: 2AOKM-FD1
47 CFR §15.19(a)(3) THIS DEVICE
COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS. (1) THIS
DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED
OPERATION.
Note: Changes or modifications
not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
HELP
For help or assistance, please contact
technical support at: 888-598-8910.
OTHER KEYS
Visit CarKeysExpress.com to find a variety
of award-winning products, like Universal
Car Keys, Universal Car Remotes, and OEM
keys and remotes.
LINCOLN
MERCURY
PAIRING INSTRUCTIONS
Instructions have timing requirements.
Waiting too long between steps may result
in your vehicle’s computer timing out,
requiring you to start over. Once you begin
the pairing procedure, be sure to move at a
quick and even pace.
PAIR CODE 1
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 3 seconds, with the 4th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
4. Within 20 seconds press any button
on the second remote. The door locks
will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF.
7. Test all remotes.
PAIR CODE 2
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 8 times
within 10 seconds, with the 8th time
ending in RUN. The door locks will
cycle to confirm pairing mode.
3. Within 20 seconds, press any button
on the first remote. The door locks
will cycle to confirm pairing.
www.CarKeysExpress.com
V3.0221 4. Within 20 seconds, press any button
on the second remote. The door
locks will cycle to confirm pairing.
5. Repeat step 4 for any additional
remotes.
6. Turn the ignition to OFF. Locks will
again cycle to indicate the end of
pairing mode.
7. Test all remotes.
PAIR CODE 3
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The system will
chime to confirm pairing mode.
4. Within 20 seconds, press any button
on the first remote. The system will
chime once to confirm pairing.
5. Within 20 seconds, press any button
on the second remote. The system
will chime once to confirm pairing.
6. Repeat step 5 for any additional
remotes.
7. Turn ignition to RUN to exit
programming mode.
8. Test all remotes.
PAIR CODE 4
1. Fasten all seat belts and close all
doors.
2. Insert a working key into the ignition.
3. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds, with the 4th time
ending in RUN.
4. Turn the ignition to OFF. An acoustic
signal will sound to confirm pairing
mode.
5. Within 10 seconds, press and hold any
button on the first remote. Wait for
an acoustic sound and warning lamp
to flash (confirming pairing), then
release the button.
6. Wait 2 seconds, but within 10
seconds, repeat step 5 for any
additional remotes.
7. To exit pairing mode, turn the ignition
to RUN or wait 10 seconds.
8. Test all remotes.
PAIR CODE 5
1. Insert a working key into the ignition.
2. Turn the ignition from OFF to RUN
(without starting the engine) 4 times
within 6 seconds.
3. Turn the ignition OFF. The LED in
the clock/trip computer will light
up continuously to confirm pairing
mode.
4. Within 20 seconds, press any button
on the first remote. The LED in the
clock will flash 4 times to confirm
pairing.
5. Within 20 seconds, press any button
on the second remote. The LED in
the clock will flash 4 times to confirm
pairing.
6. Repeat step 5 for any additional
remotes.
MAKE/
MODEL YEARS PAIR
CODE
REPLACEMENT
REMOTE
FORD, LINCOLN, MERCURY
USER GUIDE
C-Max 2013-2018 2
Crown Victoria 2000-2005 1
Crown Victoria 2006-2011 2
Edge 2007-2015 2
Escape 2001-2018 2
Escort 1998-2003 2
Expedition 2003-2017 2
Explorer 2000-2015 2
Explorer Sport 2000-2005 2
Five Hundred 2005-2007 2
Flex 2009-2017 2
Focus 2000-2006 3
Focus 2007 4
Focus 2010-2018 2
Freestar 2004-2007 2
Freestyle 2005-2007 2
Fusion 2006-2011 2
Mustang 2000-2009 2
Mustang 2010-2014 2
Taurus 1998-2009 2
Taurus 2008-2018 2
Taurus X 2008-2010 2
Thunderbird 2003-2005 2
Transit 2013-2014 2
Transit Connect 2016 2
Windstar 1999-2004 2
Cougar 1999-2002 5
Grand Marquis 1998-2005 1
Grand Marquis 2006-2011 2
Marauder 2003-2004 1
Mariner 2007-2011 2
Milan 2006-2011 2
Montego 2005-2007 2
Mountaineer 2002-2009 2
Tribute 2007-2011 2
Sable 2008-2009 2
Aviator 2003-2005 2
LS 2003-2006 2
MKS 2009-2012 2
MKX 2007-2010 2
MKZ 2007-2017 2
Navigator 2003-2017 2
Zephyr 2006 2
Instruction Manual Part Number: FDCRR-7010
Replacing car keys is simple
and affordable again.TM
12101 Sycamore Station Place Ste. 140
Louisville, KY 40299
© 2021 Car Keys Express
Table of contents
Other Car Keys Express Remote Control manuals
