Cardio Theater xTV-9T User manual

Wireless Entertainment System
Model xTV-9T Transmitter
Model xTV-9R Receiver
Operation Manual
20031 142nd Ave. NE, P.O. Box 7202
Woodinville, WA 98072-4002
Sales [phone]
Fax [phone]
www.cardiotheater.com
www.enercise.tv
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
terference, and (2) this device must accept any interference received
ding interference that may cause undesired operat
in ,
inclu ion.

TABLE OF CONTENTS
Step 1: Setting Transmitter Number
USA & Canada Mode Page 1
Australia Mode Page 2
Step 2: Connecting Transmitter to TV Page 3
Step 3: Installing Receiver Page 4
Step 4: Programming Receiver Page 5
Specifications Page 6
Warranty / Technical Support Page 7-8

STEP 1: SETTING TRANSMITTER NUMBER / USA & CANADA MODE
Simply set the left and right dials on the rear of the transmitter to the
corresponding numbers below.
Example: For Transmitter #1 set left dial to “0” and right dial to “1”
Transmitter Left Dial Right Dial
#1 0 1
#2 0 2
#3 0 3
#4 0 4
#5 0 5
#6 0 6
#7 0 7
#8 0 8
#9 0 9
#10 1 0
#11 1 1
#12 1 2
#13 1 3
#14 1 4
#15 1 5
#16 1 6
#17 1 7
#18 1 8
#19 1 9
#20 2 0
#21 2 1
#22 2 2
#23 2 3
#24 2 4
#25 2 5
#26 2 6
#27 2 7
#28 2 8
#29 2 9
#30 3 0
#31 3 1
#32 3 2
1

STEP 1: SETTING TRANSMITTER NUMBER / AUSTRALIA MODE
Warning! End user is responsible for following the number chart below for use in
Australia. Setting Transmitter dials to any other number than the ones detailed in
the chart below may result in fines and or additional punishment by local
authorities.
Simply set the left and right dials on the rear of the transmitter to the
corresponding numbers below.
Transmitter Left Dial Right Dial
#1 0 3
#2 0 4
#3 0 5
#4 1 1
#5 1 2
#6 1 3
#7 1 4
#8 1 5
#9 1 6
#10 2 6
#11 2 7
#12 2 8
#13 2 9
#14 3 0
#15 3 1
#16 3 2
2

STEP 2: CONNECTING TRANSMITTER TO TELEVISION
Important: Television with “Audio Output” jack required.
1. Connect provided patch cable into Left & Right Audio Output
Jack on rear of TV.
2. Plug other end of patch cable into the Left & Right Audio Input jack on
rear of transmitter.
3. Plug provided AC adapter into 110 AC outlet.
4. Turn TV Speakers OFF via TV menu function.
5. Turn TV volume up at least 50%.
6. Adjust audio level control so red “Peak” light blinks on and off.
Caution: Turning audio level to high will cause sound distortion
7. Plug heaphones into xTV receiver. Match sound level of each TV by adjusting
volume of each individual TV.
8. Place corresponding number sign under each TV
CONNECTING THE xTV-9T TRANSMITTER TO MUSIC COMPONENT:
1. Connect provided patch cable into Left & Right Audio Output Jack on rear of
music component and follow steps 2 through 8 above.
3

STEP 3: INSTALLING RECEIVER
Mounting Receiver
The Enercise xTV Receiver is designed to mount to any make or model of
cardio equipment.
1. Insert two nylon wire ties (provided) through the holes in the mounting bracket
on the rear of the Enercise xTV Receiver.
2. Wrap wire ties tightly around the bar so the receiver does not rotate.
ΝΟΤΕ: Do not place receiver where it would interfere with the cardio unit controls
or display panel. The xTV Receiver mounting bracket may be removed with
pliers and mounted with Super Lock Velcro to any flat surface.
Powering Receiver
Power the xTV Receiver one of two ways:
1. C-Safe Cable: Most cardio manufacturers offer C-Safe compatibility.
Connect the Ultra Seal C-Safe cable to the C-Safe port located on cardio
unit. (Refer to the manufacturer to locate C-Safe port on cardio unit).
Note: Many CV manufacturers offer C-Safe retrofit kits for older models.
Contact your CV manufacturer for availability.
2. 9 Volt AC Adapter: In the event that C-Safe is not available on the cardio
unit, use the optional Ultra Seal 9 Volt AC adapter. A standard 110AC
outlet is required near the cardio unit.
Ultra Seal Connector:
The exclusive Enercise Ultra Seal power connector, found on both Enercise C-
Safe cables and Enercise 9 Volt AC Adapters, prevents sweat or cleaning
products, from entering the unit.
1. Insert the connector on the rear of the xTV-R and press firmly around the
connector hood to make a complete seal.
2. To disconnect, press tab on bottom side of connector and release.
4

STEP 4: PROGRAMMING xTV-9R RECEIVER
This function enables the receiver to program the exact amount of transmitters
and number them accordingly.
Enercise Auto Program Mode (When Using Enercise Transmitters):
1. To activate program mode, press Volume UP and Down buttons
simultaneously for 3 seconds. The number 1 with a decimal point on the left
side will pop up in display window
2. Press the EQ button to begin Scanning. Scanning will take about 15 seconds.
3. When Scanning is completed, press channel Up and Down buttons to
confirm all transmitters have been programmed.
Cardio Theater™ LCS Program Mode (When Using LCS Transmitters):
1. Press Volume "UP & DOWN" simultaneously for 3 seconds. The number 1
With a decimal point on the left side will pop up in display window
2. Press Channel 'UP" button for 2 seconds to select #2.
3. Press "EQ" button to begin Scanning. Scanning will take about 25 seconds.
BroadcastVision™ 900 Program Mode (When Using BV900 16 Channel
Transmitters):
1. Press Volume "UP & DOWN" simultaneously for 3 seconds. The number 1
with a decimal point on the left side will pop up in display window.
2. Press Channel 'UP" button for 2 seconds to select #3.
3. Press "EQ" button to begin Scanning. Scanning will take about 15 seconds.
NOTE: BroadcastVision transmitters must be set to stereo/music mode.
Manual Program Mode (To Add or Delete Channels Manually)
1. Perform Auto Program scan. Wait for Auto Program sequence to complete.
2. Press Channel UP and Down buttons simultaneously for 3 seconds. The
number 1 with a decimal point on the left side will pop up in display window.
3. To activate any channel, press Channel Up or Down button to select desired
channel. Press the EQ button to activate channel. A decimal point will pop up
on the right side of the number to confirm activation.
4. Press mute button when completed
5

XTV-9T Specifications
Input Sensitivity 100 to 1 volt
Input Impedance 10K ohms
Level Gain Control -70 dBm to + 10dBm
Transmission Frequency
Signal to Noise -70 dBm ref .7 volts
Distortion <2 %.
Audio Frequency Response 20Hz to 15KHz
Weight 1 lbs.
Power Requirements 12 VDC 200 mA
Dimensions W: 5.50"
H:1.48"
D:5.00"
6
905MHz to 925.6MHz
RF Output 0.48 mW EIRP

WARRANTY
Cardio Theater warrants the xTV wireless entertainment system to be free from
defects in material and workmanship for the following period of time from date of
shipment, provided that the products have not been subject to mechanical,
electrical, or other abuse or modifications.
Cardio Theater xTV-T Wireless Transmitter 3 Years Parts & Labor
Cardio Theater xTV-R Wireless Receiver 1 Year Parts & Labor
Quick Change Headphone Jack 90 Days
Should the xTV wireless entertainment transmitter or receiver be deemed
defective by Cardio Theater, a return authorization number will be issued. Cardio
Theater will not accept returns without a return authorization number.
Cardio Theater reserves the right, at their option, to repair or replace the
equipment after verification of defect.
Equipment that fails after the warranty period expires will be repaired at the
current price of part and labor after authorization from the customer. Repairs are
warranted for 90 days.
This warranty is in lieu of all other warranties expressed or implied.
NOTE: This equipment has been tested and found to comply with the limits for
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.
The user is cautioned that changes or modifications not expressly approved by
the manufacturer of the equipment could void the user’s authority to operate the
equipment.
WARNING: To Prevent Fire Or Electrical Shock, Do Not Expose This Appliance
To Rain Or Moisture.
7

TECHNICAL SUPPORT
Technical Support Numbers
Telephone USA [phone]
[phone]
Fax [phone]
UK [phone]
Technical Support Hours:
7:30 AM to 5:00 PM Monday through Friday PST.
Write To:
Cardio Theater Holdings, Inc
20031 142nd Ave. NE, P.O. Box 7202
Woodinville, WA 98072-4002
Notice
Due to continuing advancements in technology, Cardio Theater reserves the right
to make changes in hardware, packaging, and any accompanying documentation
without prior written notice.
© 2003 Cardio Theater Holdings, Inc., all rights reserved
8