caresmith bloom User manual

WHAT’S IN THE BOX
1
USER MANUAL

2
WHAT’S IN THE MANUAL
Product Specications 4
Charging Your Device 6
Changing Roller Heads 7
The How-To Guide 8
Caresmith Bloom Rechargeable Foot File
Caresmith Bloom Nail Buffer
Safety Precaution 14
Warranty 15

WHAT’S IN THE BOX
Extra Coarse Roller Head x1
Regular Coarse Roller Head x1
Cleaning Brush x1
USB Charging Cable x1
Nail Bufng Heads x2
Grey
Surface
for nail
buffing
White
Surface
for nail
polishing
2
1

4
PRODUCT SPECIFICATIONS
Roller
Head
Charging
Indicator
Start/Stop
Speed Switch
Charging Port

Rechargeable
Li-ion Battery
Capacity
600mAH
Charge Time
2hrs
Usage Time
upto
90mins
on 1st intensity level
Weight
160g
2 Variable Speeds
2000
rpM
FOR Powerful
Scrubbing
1700
rpM
FOR Gentle
Exfoliation
5

6
CHARGING YOUR DEVICE
1To charge, connect the
device to the USB cable
provided.
2Insert the USB cable
into any USB power
adaptor and connect
to a power supply.
3The LED indicator on
the device will glow
RED indicating that the
battery is now charging.
4Full charge takes about
2 hours and is indicated
when the LED on the
device turns GREEN.
5It is not recommended
to fully deplete the
battery during use.
6The average run-time
is upto 90 minutes
depending on speed
level chosen.

7
CHANGING ROLLER HEADS
1 Turn off the device
before changing roller
heads.
2Pull out the currently
attached roller head.
3Insert the new head.
You will hear a ‘click’
sound when the head
is rmly in.
Regular Coarse
Roller Head
for dead skin reMoval
Extra Coarse
Roller Head
for callus reMoval
Nail Bufng Head
for buffing &polishing

8
the
How-to
Guide

CARESMITH BLOOM
Rechargeable
Foot File
Regular foot care is important for preventing dry skin and
calluses, helping you to get healthy, beautiful looking feet.
An easy and effortless way to remove hard skin from your
feet without having to make expensive trips to the beauty
salon is with the Caresmith Bloom Rechargeable Foot File.
9
1Clean, wash and
thoroughly dry your
feet before you begin.
2Pick the required
roller head and insert
in the device: regular
coarse for exfoliation
and dead skin removal,
extra coarse for hard
skin and callus removal.
3Long press the Start
button. The roller
will now spin at the
1st intensity level.

10
WARNING:
• Stop using the foot le if skin becomes sore or inamed.
• If the device begins pinching your skin, it is not being
held correctly. Please refer to point 4 above.
• The device will stop rotating if over pressed against
the skin and will harm the life of the device.
4Hold the device with
the back of the handle
facing you.
5 Move the roller slowly
over the areas of dry skin
that you want to remove.
Do not push down too
hard against the skin.
6 Do not use on the
same spot for more than
3 seconds at a time
7 The head of the product
can be used for smaller
areas. The longer part is
for general use.
8After treating the hard
skin areas, switch off your
Bloom Foot File. Rinse
your feet or use a wet
towel to remove any
excess dry skin.
9 To complete the
pedicure, apply moisturizer
to maintain the moisture
balance in the skin.
10 To clean your device,
gently remove the roller
head. Rinse the roller
head to remove any dead
skin particles. Wipe the
rest of the device with
a moist cloth. When
the device and head
are clean and dry, you
can reassemble them.